Can we upgrade any solution by solution manager?

hi
can we upgrade any solution , that may be xi ,mi , bi by using solution manager?
thanks

Hi Ashley
- it comes with content which simplifies the upgrade, or which allows you to create own documentation, and as such it is higly recommended.
- following the Master Guide for SAP ERP 6.0: "Each SAP ERP (or SAP NetWeaver) system landscape >must< be assigned to an installation of the SAP Solution Manager. SAP Solution Manager is the required platform to efficiently support the implementation and operation of your SAP application. As a prerequisite for support, SAP requires remote access to the SAP Solution Manager that hosts the affected system landscape."
regards,
Andreas R
Edited by: Andreas Rudolph on Oct 6, 2008 9:12 AM for "- following the Master Guide..."

Similar Messages

EHP1 upgrade of solution manager-any effects in landscape due to common SLD

Hello All,
We have ECC,BI,SRM,XI,EP,MAM and BD in our setup and yes of course Solution Manager dev and prod
We have our SLD installed on solution manager production which is common for all the systems of the landscape
Now we have performed EHP1 upgrade if Solution manager dev and now we are planning on solution manager production
So just want to know,do you forsee any issues after we upgrade the solution manager production to EHP1 in respect to SLD or can there be any issues in the landscape because of this upgrade?
Please let me know your suggestions
Rohit

> So just want to know,do you forsee any issues after we upgrade the solution manager production to EHP1 in respect to SLD or can there be any issues in the landscape because of this upgrade?
The SLD is not affected.
However, SolMan EHP1 requires a LOT of separate notes to be applied.
Note 1172948 - SAP Solution Manager - Basic functions
Depending on what scenarios you use, you will also need to upgrade ST-PI in the external systems before EWAs will be again correctly created.
Markus

Oracle upgrade in Solution Manager 10g to 11g

Dear Expert team ,
Our Solution Manager is running in Windows 2003 with oracle 10g .
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
SQL>
Now I want to upgrade my Solution Manager 10 g to 11g .
what oracle component should I download and how to upgrade 10.2.0.2.0 to 11.2.0.3.0.
Please suggest.
Regards
Pooja

Hi
The upgrade is possible as stated in the here under note.
Previous version (v15) of that note was even a bit more clear it is possible but version 10.2.0.4 is preferred.
Direct upgrade from 10.2.0.2 should not be a problem, as it is even possible to have a direct upgrade from 9.2.0.8 to 11.2.0.4.
1431793 - Oracle 11.2.0: Upgrade Scripts
A database < 9.2.0.8 must be upgraded to 9.2.0.8 before it can be upgraded directly to 11.2.0.4.
You should consider jumping directly to 11.2.0.4 that is the latest 11g version and the only one that will have a long term support.
Regards
1431797 - Oracle 11.2.0: Troubleshooting the Database Upgrade
For a database upgrade from 10.2. to 11.2 the minimum release is 10.2.0.2. This release is not supported any more.
1431797 - Oracle 11.2.0: Troubleshooting the Database Upgrade v15
We strongly recommend a minimum release 10.2.0.4 for the following reasons:
a) All SAP internal database upgrade tests have been performed with
release 10.2.0.4. This upgrade path has been very well tested and
is documented in the SAP Database Upgrade Guide for Oracle Release
11.2.
b) Oracle Database Release 10.2.0.2 is not supported any more.

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

I just bought a new iMac and am having troubles downloading creative cloud installer. Its coming up with error 214 - I can't find any solutions for this. Can anyone help me? Im on mac OS 10.9.4

Meg81 error 214 indicates a download data validation error. This means that the update you downloaded became corrupted likely during the download process. I would recommend utilizing the suggestions listed in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html to attempt to improve the stability of your Internet connection.
You can also find information on how to review your download logs which may provide additional information regarding the failure of the download.

I paired magic mouse with my laptop in windows, but can't scroll, any solution ?

I paired magic mouse with my laptop in windows but can't scroll, any solution ?

Hello:
Your post lacks enough information to respond intellligently.
The link below addresses some issues:
http://support.apple.com/kb/TS3039
Barry

HT3964 Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

Hello, my isight camer is not working properly, i was using photo booth and suddenly the image was black or too dark and also ichat and facetime are too dark as well, please helpme out i can not find any solution.

read this and see if it helps: http://support.apple.com/kb/ht2090

What type of Business Processes can be imported in Solution Manager 7.1?

Hello Together,
currently i deal with the topic: BusinessProcessMonitoring.
My question: what types of businessprocess can be imported in Solution manager 7.1?
- exported processes out of the NetWeaverDeveloperStudio?
- processes out of the CE?
Some else....???
I would be happy about some answers.
Thanks and kind regards
Henry Radziwolek

Hi Henry,
Today in Solman 7.1 onwards creation of business processes is really very and you can use the content upload interface which means you can upload the processes via excel file as well.
so you can download it from other system into a flat file and upload the same in solman to quickly do the same.
http://sapinsider.wispubs.com/Assets/Blogs/2012/January/Introducing-Content-Upload-Interface-in-SolMan-7-dot-1
in terms of importing from another solman ...if you have a transport route ...definately you can create a TR and import the project with processes into your new solman system
or if it is Solution in another system then also you can use solution transfer function/feature to import it.
Also, if you are talking about Netweaver BPM tool this requires integration setup with solman (BPB) etc to do that like ARIS integration etc.
Integrate your Business Blueprint with SAP Netweaver BPM
hope this helps you further.
Regards
Prakhar

EHP4 Upgrade in Solution Manager 7.1 system

Hi
i recently upgrade the Solution Manager system from 7 to 7.1.
Now i'm asked to upgrade the Ehp4 for Solution Manager 7.1 system. Couple of questions...is it possible to install Ehp4 (which is only available for ERC ECC 6) to the Sol Man 7.1 system?
I searched in market place to download the Ehp4 , but it is only available for 7.01...Which is the right media to be used....?
EHP4 FOR SAP ERP 6.0 / NW7.01
Product Availability, Maintenance Dates & Supported Platforms
Installation
based on SAP NetWeaver 7.01
based on SAP NetWeaver 7.3
Upgrade
based on SAP NetWeaver 7.01
based on SAP NetWeaver 7.3
regards
Chan

Hi,
EHP4 is only available for ECC systems. For more information on the product please review the below links
http://service.sap.com/erp-ehp
Regards,
Naveen.

Can I create a solution manager key without applying license

Hi,
Can I create a solution manager key without applying license?
I need to know an answer to this , because I am installing a Netweaver 2004s component and during installation, I am being prompted for Solution Manager Key.
Can I use an unlicensed Solution Manager instlallation for genereating key?
Thanks,
Harish

Hi,
Yes, for generating key, you can use the Solution Manager for which you have not installed license.
Hope this solves your problem.
Feel free to revert back.
--Ragu

I just upgraded to ios 7.1. Now i can't upgrade any of my games. Anybody can help me please?

I just upgraded to ios 7.1. Now i can not upgrade any of my games. Anybody help me please?

You won't lose anything, but any settings you've adjusted, you'll have to reset.
There are only so many "easy" troubleshooting steps before you're facing a restore. So, it's up to you. I'm trying to give you options that don't delete anything, yet may fix your issue.

Upgrade to Solution Manager 7.1 missing Master upgrade DVD

Hi,
I'm upgrading Solution Manager 7.0 EHP1 to Solution Manager 7.1 . I've got the following error;
Please enter mount points for the DVDs required for the upgrade.
Enter at least the mount point containing "Upgrade master DVD"
I Can't find this "Upgrade master DVD" on market place. I've opend an OSS message but no answer yet. Anyone had that problem?
Thanks!

I had the same issue. It turns out that what it was really asking for was a SAP Kernel DVD in the correct format.
When I downloaded the SAP Kernel DVD from the Market Place, the Zip file included a directory for my platform at the first level on the DVD, and then in that directory it contains the LABEL.ASC file.
You need to ensure that when you stage the Kernel DVD, the LABEL.ASC files etc should be in the Top Level directory, or it won't be recognised as a DVD, and you'll get the erroneous message about needing an "Upgrade Export DVD" (which does not exist for Solman 7.1).
Hope this helps!

Upgrade to Solution Manager 7.1 stopped in phase DEPLOY_ONLINE_DEPL

Dears,
we are upgrading our Solution Manaher from Ehp1 for Nw 70, to Nw.71.
While on the ABAP tab is in progress the phase MAIN_NEWBAS\TABIM_UPG on the J2EE tab we are blocked in phase DEPLOY_ONLINE_DEPL.
As suggested from the Ehpi screen we read note 1399846, but our case is different so the note is not usable.
First in the logs we have the message:
Mar 5, 2012 4:54:26 PM [Info]: Processing request to deploy queue sapjup-queue.
Mar 5, 2012 4:54:26 PM [Error]: Login not performed yet. JSPM not initialized.
Mar 5, 2012 4:54:26 PM [Error]: Could not process deploy queue sapjup-queue request.
Mar 5, 2012 4:54:26 PM [Error]: java.lang.NullPointerException: while trying to invoke the method com.sap.sdt.jspm.model.JspmDataModelIF.save() of an object loaded from field com.sap.sdt.jspm.deployment.queuemanager.QueueManager.dataModel of an object loaded from local variable this
Mar 5, 2012 4:54:26 PM [Error]: Login not performed yet. JSPM not initialized.
That's different respect to the Oss note, then second we did not start manually the JSPM.
How we can go ahead ?
We did not find any Oss Note for this error.
Regards

after a reboot of the system and a restart of the upgrade process the
error changed and it was as described in note 1399846.
So we applied the workaround suggested, but now we have a new error.
If we restart the upgrade process doing first startsap(so starting both Abap+Java), the upgrade process for the J2EE tab complains the stack provided and used till now (we are already in the DOWNTIME phase) does not match the system status.
If we restart the upgrade leaving the Abap+java instances down the upgrade process complain the SDM is nit 'is not
able to connect to the system.
I read somewhere It's possible to disable the upgrade process for the Java stack, in order to complete that one for the ABap stack.
Then for the Java Stack we could use the normal JSPM, but I'm not able to find the relative Oss note.
Any advise ?

Technical Upgrade using Solution Manager

Hi All,
I am aware of the Maintainence Optimizer in SolMan to download Support packages/Enhancement Packages. Does the solution manager support a technical upgrade of a system as well? Please provide your suggestions. I was not able to find any information regarding this and am not if this is even supported.
Thanks in advance,
Srikishan

Hi
You may want to visit the upgrade road map information is available in this link
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000633637&
Cheers,
Sh

How to include an enhancement package with upgrade without Solution Manager

Hello,
I have been trying to do an upgrade from SAP R3 46C to ERP6 in my sandbox. I want to include Enhancment package 3 with the upgrade. I have tried using the Solution Manager to download the Enhancement package and it work fine except that it did not create the XML Stack configuration file that the upgrade is looking for. Therefore I downloaded the DVD for Enhancement package 3 and included that in the mounted CDs in the PREPARE portion of the upgrade and it does not recognize it.
Now for my question, is there a way to include the Enhancement package with the upgrade without using Solution Manager? If so, could someone please let me know where to find the information or share the procedure with me?
Thank you in advance,
Ron

The EPs are just like support packages (optional); if the upgrade is not letting you put it during upgrade then just do it once the upgrade is completed.

Error while upgrading to Solution Manager EHP1 from 3.2

Hi All,
I am trying to upgrade the solution manager3.2 to EHP1.
OS: Linux RHEL 4
DB: Oracle 10.2.0.2
I am in the Prepare phase.....
When I try to run the JPREPARE command( /dump/smrtest/SMR_UP/51036444/JPREPARE) I get the following error message
An unrecoverable error has occured:
Could not execute dialog SelectModulDialog. See previous messages.
Input output exception while processing dialog SelectModulDialog. See previous messages.
Could not send dialog message. See previous messages.
Could not bind to port 6240.
java.net.BindException: Address already in use
Can anyone help asap?

> I am in the Prepare phase.....
> When I try to run the JPREPARE command( /dump/smrtest/SMR_UP/51036444/JPREPARE) I get the following error message
You have a Java instance installed on 3.2?
> An unrecoverable error has occured:
>
> Could not execute dialog SelectModulDialog. See previous messages.
> Input output exception while processing dialog SelectModulDialog. See previous messages.
> Could not send dialog message. See previous messages.
> Could not bind to port 6240.
> java.net.BindException: Address already in use
Read the documentation about SAPJup - you have to change the default port (because most likely your ABAP part uses that one).
Markus

Can we upgrade any solution by solution manager?

Similar Messages

Maybe you are looking for