Can we upgrade IOS in WLC 5508 through CISCO prime?

I have CISCO prime 2.0 and CISCO WLC 5508 HA SSO pair.
I would like to upgrade the software code for the WLC HA pair.
Can I do through the CISCO prime ......
As per the link :http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html#pgfId-43571
1. After the WLCs are configured in the HA setup, the Standby WLC cannot be upgraded directly from the TFTP/FTP server.
Prime do the upgrade through FTP server , so will it be ok if we do the upgrade through it, for HA WLC.

Please check this link to upgrade wLC software in HA setup.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.html
Once the Primary WLC complete the upgrade , it will transfer the entire image to the Standby WLC via the Redundant Port.
Regards
Dont forget to rate helpful posts

Similar Messages

  • Can we Monitor third party Windows servers through Cisco Prime

    Hi Team,
    We are  using  Cisco Prime assurance and  are currently monitoring Cisco UCCE Components through it.
    Meanwhile we have   few third party  windows servers , which we would like to monitor it through Cisco Prime , just to maintain a single monitoring tool.
    If yes, please share the steps or link.Also highlight the limitations in that.
    Regards,
    krishna

    Seems Cisco Prime Assurance Manager is now obsolete and end of life already.
    It is replaced by Cisco Prime Infrastructure. CPI supports third party/vendor devices to some minimum extent with limited management details collected via SNMP Templates.
    -Thanks
    Vinod
    **Encourage Contributors. RATE Them.**

  • I just bought a refurbished iPad, model MC496LL.  IOS 5.1.1  Can I upgrade iOS to 6 or 7? How?

    I just bought a refurbished iPad, model MC496LL.  IOS 5.1.1  Can I upgrade iOS to 6 or 7? How?

    No. That's a first generation iPad.
    (98112)

  • HT4623 can we update ios 7.0.2 through desktop

    can we update ios 7.0.2 through desktop

    You can update to iOS 7 using iTunes from your computer or if your iPhone is running iOS 5 or greater Over The Air

  • HT4623 Can i upgrade ios 6 to ios 7 on my i phone 4?

    Can i upgrade ios 6 to ios 7 on my i phone 4?

    Yes, you can upgrade iOS 7 for your iPhone 4.
    Apple has been announced the beta 2 version, if you would like to use it,
    register as developer and your device will be granted to use the beta iOS 7.
    For your information:
    https://developer.apple.com/
    Hope it would be helpful for you.

  • I can't join LAP to WLC 5508 in difference subnet

    i can't join LAP to WLC in difference subnet now i create 2 interface [management / ap-manager]
    management : 192.168.1.1 / 24
    ap-manager : 192.168.1.2 / 24 vlan 10
    ap-manager2 : 192.168.2.2 / 24 vlan 11
    ap-manager3 : 192.168.3.2 / 24 vlan 12
    connect with core switch 3 interface [access port vlan same wlc]
    or how create wlc interface for join with LAP please advise me or send capture screen for me to create all interface
    Thank you for best support.

    I created a video actually how to configure option 43 on my site.
    http://www.my80211.com/cisco-wlc-labs/2009/7/4/cisco-dhcp-option-43-configuration-nugget.html
    So when you fire up an AP it goes through a few steps to find the controller.
    1) It does a broadcast and if your APs are on the same VLAN as your apmangers/managment then she will connect
    2) If it isnt on the sanme vlan it will attempt to reslove CISCO-LWAPP-CONTROLLER or CISCO-CAPWAP-CONTROLLER. This is where you would need to create an A-record in your DNS server and reslove it to your MANAGEMENT controller IP address
    3) Also Option43. When your AP gets an IP address, you can add option 43 to the scope. Option 43 again tells the AP where to find the controller.
    Now you can do a manual prime to these as well. Extend your managment vlan to a switch and have the APs join. Once they take the download and config they will know the controllers ip address. And then you can deploy them on different vlans and they will join ...
    Does this make sense?

  • Upgrade Software Version WLC 5508

    Dear,
    i try to upgrade the software from 6.0.199.4 to 7.5.102
    can we do it directly or we shoud upgrade gradually first from 6.0 to 7.0 then 7.5 ?                  
    when we try from TFTP it give error [code file error disconnected- unknown error]
    tru FTP error is [cont send replay disconnected]
    Can you Help me Please

    addition to Sandeep & Scotts feedback,
    When you do the upgrade, make sure your 5508 FUS also get upgraded to latest version 1.9.0.0. Here is the release notes for that
    https://www.cisco.com/en/US/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.pdf
    This process will take 30-40min & do this within a sufficient outage/maintenance window.
    Here is the release notes for 7.4.121.0(7.4MR2) the one I would recommend
    http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74mr02.html
    Also refer the compatibillity matrix to see which product it will support depending on the products that are available at your environment
    http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Can i upgrade  ios 7 beta to my I Phone 5 ???, Can i upgrade  ios 7 beta to my I Phone 5 ???

    Hiii All. I hv I Phone 5 purchased from India. I want to know can i upgrade io7 beta to my I Phone 5 ??? If yes than how ?? Pls let me guied.
    Abhishek Patel

    Read this:
    http://www.tuaw.com/2013/06/13/psa-if-youre-not-a-developer-dont-install-develop er-betas-on/

  • Can't upgrade IOS 4.2.1 to 4.3.5 for iPad 1

    Please hlep.
    I have iPad1 with original IOS 4.2.1. I tried to upgrade IOS 4.2.1 to 4.3.5 for that ipad1 and iTunes said that it was not eligible to upgrade to 4.3.5.
    I used downloaded firmware file of IOS 4.3.5.
    I don't want to upgrade to IOS 5 and therfore what should i do to upgrade to 4.3.5?

    Please anyone help for my issue.
    I have iPad1 and I did not jailbreak it. It has original IOS 4.2.1 installed.
    I downloaded IOS 4.3.5 for iPad from Internet and tried to upgrade througth iTunes but I got error message "The device is not eligible".
    Is upgrading to IOS5 is the only way for iPad1 or is there a way for me to overcome this problem?
    Thanks and regards...

  • WLC 5508 Discovery in Prime Infrastructure

    I have newly deployed a Prime Infrastructure (PI) in my network, and i want to add my wirless controller in it.
    I get an error SNMP time out whenever i add my controller to PI through SNMP.
    There are default SNMP configurations in the controller and i am simply adding them in PI with their private/public SNMP string.
    Is there something i am missing?
    WLC 5508 is connected to my core switch and PI is connected to another switch which is directly connected to core switch via Layer 3.
    Is there any configuration required to be done on the switch side.?                  

    Hello,
    Please go through the below link, it may help you to add WLC in Prime Infrastructure (PI)
    https://supportforums.cisco.com/docs/DOC-29006

  • WLC 5508 and Cisco Aironet 1242 LWAPP AIR-LAP1242AG-A-K9

    i have deployed wlc 5508 ( image 7.0.98.0 ) with 1262N AP and all 45 AP's are working fine,
    at the same site i had AP1242 which i have converted to LWAPP (8 of them), these accesspoint are registerd perfectly with 5508 but non of the radio's are up. i have selected different countries according to the part numbers but unfortunaly non of the radio's are coming up, pleaes help
    Sathees

    Available:370.0(w)  Used:32.4(w)  Remaining:337.6(w)
    Interface  Admin    Oper     Power        Device           Class
                                (Watts)                           
    Fa0/1      auto  off           0.0  n/a                  n/a      
    Fa0/2      auto  off           0.0  n/a                  n/a      
    Fa0/3      auto  off           0.0  n/a                  n/a      
    Fa0/4      auto  off           0.0  n/a                  n/a      
    Fa0/5      auto  off           0.0  n/a                  n/a      
    Fa0/6      auto  off           0.0  n/a                  n/a      
    Fa0/7      auto  off           0.0  n/a                  n/a      
    Fa0/8      auto  off           0.0  n/a                  n/a      
    Fa0/9      auto  off           0.0  n/a                  n/a      
    Fa0/10     auto  off           0.0  n/a                  n/a      
    Fa0/11     auto  off           0.0  n/a                  n/a      
    Fa0/12     auto  off           0.0  n/a                  n/a      
    Fa0/13     auto  off           0.0  n/a                  n/a      
    Fa0/14     auto  off           0.0  n/a                  n/a      
    Fa0/15     auto  off           0.0  n/a                  n/a      
    Fa0/16     auto  off           0.0  n/a                  n/a      
    Fa0/17     auto  off           0.0  n/a                  n/a      
    Fa0/18     auto  off           0.0  n/a                  n/a      
    --More--                          
    Interface  Admin    Oper     Power        Device           Class
                                (Watts)                           
    Fa0/19     auto  off           0.0  n/a                  n/a      
    Fa0/20     auto  off           0.0  n/a                  n/a      
    Fa0/21     auto  off           0.0  n/a                  n/a      
    Fa0/22     auto  off           0.0  n/a                  n/a      
    Fa0/23     auto  off           0.0  n/a                  n/a      
    Fa0/24     auto  off           0.0  n/a                  n/a      
    Fa0/25     auto  off           0.0  n/a                  n/a      
    Fa0/26     auto  off           0.0  n/a                  n/a      
    Fa0/27     auto  off           0.0  n/a                  n/a      
    Fa0/28     auto  off           0.0  n/a                  n/a      
    Fa0/29     auto  off           0.0  n/a                  n/a      
    Fa0/30     auto  off           0.0  n/a                  n/a      
    Fa0/31     auto  off           0.0  n/a                  n/a      
    Fa0/32     auto  off           0.0  n/a                  n/a      
    Fa0/33     auto  off           0.0  n/a                  n/a      
    Fa0/34     auto  off           0.0  n/a                  n/a      
    Fa0/35     auto  off           0.0  n/a                  n/a      
    Fa0/36     auto  off           0.0  n/a                  n/a      
    Fa0/37     auto  off           0.0  n/a                  n/a      
    Fa0/38     auto  off           0.0  n/a                  n/a      
    Fa0/39     auto  off           0.0  n/a                  n/a      
    Fa0/40     auto  off           0.0  n/a                  n/a      
    Fa0/41     auto  on           15.0  cisco AIR-LAP1242AG  Class 3  
    --More--                          
    Interface  Admin    Oper     Power        Device           Class
                                (Watts)                           
    Fa0/42     auto  off           0.0  n/a                  n/a      
    Fa0/43     auto  on            5.8  cisco AIR-LAP1242AG  Class 3  
    Fa0/44     auto  off           0.0  n/a                  n/a      
    Fa0/45     auto  on            5.8  cisco AIR-LAP1242AG  Class 3  
    Fa0/46     auto  off           0.0  n/a                  n/a      
    Fa0/47     auto  on            5.8  cisco AIR-LAP1242AG  Class 3  
    Fa0/48     auto  off           0.0  n/a                  n/a     

  • Upgrading from LMS 4.1 to Cisco Prime Infrastructure

    Looking for some information and confirmation on the upgrade process.
    Currently we are running LMS 4.1 with a valid SAS Service Contract which will allow me to upgrade to Prime Infrastructure 1.1 or Prime Infrastructure 1.2 using the upgrade tool at no charge. After using the tool I am given access to download PI1.1 or PI1.2, however, it only actually let me download PI1.1 but said i do not have the proper permissions to download the 1.2 license. I also noticed that the software images for 1.2 are not available ont he ciso download page.
    I am wondering what the latest version of Prime Infrastructure I will be able to upgrade to without an additional purchase. Can I upgrade up to all the way up to 1.4 or can I only go up to 1.2 (but then where is the download for the software).
    If i can upgrade to 1.4 then what path should I take? 1.1 to 1.3 to 1.4? Just skip 1.2 since the download is not available and it will not let me download the license file?
    Thank you for your help

    LMS 4.x to Prime 1.x would not be considered a functional or recommended "upgrade" for most intents as you would lose several major capabilities (Topology, Ciscoview, many reports, compliance templates, etc.). Your best path right now would be to move your LMS along to the current version - 4.2.4. The release notes explain the upgrade path for that.
    Licensing and upgrade eligibility-wise you need SASU for PI (not plain SAS for LMS) for major upgrades (i.e to go to 2.0). An LMS SAS contract entitles you to migrate to PI 1.2 which in effect means 1.3 although Cisco had some issues with updating the ordering system so there was not actually a SKU for PI 1.3 sold - only the 1.2 version which, when combined with your LMS SAS service contract, entitles you to move to PI 1.3 (or 1.4 but that's not generally recommended). More details are in the Prime Ordering and Licensing Guides here.
    Personally, I recommend customers with existing LMS 4.x installations wait until PI 2.1 comes out to consider the upgrade. 2.0 still misses several tools present in LMS 4.x.
    If you really want to move over to PI, you can export the data from LMS 4.2.4 and import into PI 1.3 (or 2.0).

  • Can't upgrade iOS 4.3.3 to iOS 5.1 on iPad

    I'm trying to help a technophobe friend update her iPad from 4.3.3 to 5.1. She's done no upgrades to her iOS since getting her iPad. I've done each of mine seamlessly. I am completely perplexed and haven't found an answer to our dilemma since we embarked on this quest. To make it more challenging for me, she has a PC so I'm in foreign territory working on her computer. She also hasn't turned on her laptop in the year she's had her iPad so we had to update iTunes. That part went fine.
    We ended up syncing her iPad about three times so all of her apps and music are up to date on the PC and the iPad. The update of the of the iOS appeared to work each time. It took the 89 minutes it predicted at the start. The update message says it's 5.1 and it says it will install after downloading. We have now gone through this process FOUR times. That's a lot of hours for nothing. The last time we actually babysat the process. It was as exciting as watching paint dry. It appeared to flow fine concluded in front of our eyes. The ipad switched to the wallpaper screen and had a small tone. The Apple came back to the top iTunes banner. Then NOTHING. I checked Settings>General>About and it still said Version 4.3.3. We uncounted the iPad, turned it off and powered it up again and it is still on 4.3.3.
    What are we doing wrong?
    Her iPad is the Verizon model and I saw in one thread that said there are three varieties of upgrades but I don't know how to verify the right one is downloading from iTunes. I would hope the iTunes connection can detect which version is needed.
    I also found on the Apple website the list of four upgrades she neglected before 5.1. It indicates those older updates are available in iTunes but I can't figure out where to get to them. The Upgrade button goes right to the 5.1 version. I'm wondering if there are components in those incremental updates that she needs before 5.1 will work, or does 5.1 install everything she's missed along the way?
    Any help or insight on this frustrating situation will be appreciated.

    I solved this problem with detective work and hints from another discussion thread. I detailed my solution here on the 3 April 2012 entry of the following thread:
    iOS 5.1 won't upgrade my iPod & iPad 2 on my newer mac, but it will install perfectly to my sisters same model iPod using an old windows laptop in the same internet connection in the same house
       Apr 3, 2012 10:23 AM    (in response to MacLoyal)
    https://discussions.apple.com/thread/3787478?start=45&tstart=0
    Perhaps someone else is struggling with the same roadblock. You cannot jump from 4.3.3 to 5.0 or beyond over a wireless connection. You must be plugged in with an ethernet connection to your internet. After 5.0 you can update OTA, translation Over The Air.
    I don't know if the OP (Original Poster) was trying to do it wirelessly with a Mac, but in my case it had nothing to do with being on a PC or Mac (with the exception of me being in foreign territory in her house and on her PC - MacLoyal, I am) and everything to do with not having a wired connection to the net.

  • Can I upgrade iOS and still retain *everything*, if I didn't authorize Apple ID and didn'nor had I performed a manual backup?

    I am an IT guy here helping 10+ iPad and iPhone users upgrading to iOS 5.  I have finished the first two devices, by the following steps:
    Obtain the user's Apple ID and password
    Get to a clean computer (precisely, logon to a clean profile)
    Authorize the user's ID in iTunes
    Transfer purchases (then it will download all installed apps)
    Maannuly perform a backup (1), just in case.
    Perform iOS5 update following the standard procedure.
    Then during the process, iTunes backs up the device again (I am not sure if this backup (2) has any different from the one that I've done manually), but after everything is done, all apps with their data, account setting, camera roll, even the placing of app icons seemed to be restored to the updated device 100% successfully.
    Deauthorize Apple ID.  "Next one please."
    THAT WAS VERY TIME CONSUMING!!
    My question is, what will happen if I upgrade a device without doing step 1 through 5 first ?  Will backup (2) still backs up everything and restore it,although the user's ID was not authorized in this copy of iTunes?
    If this works then it wil save me a lot of time.  I can't risk to test it because if it doesn't work, I won't have a good backup to restore the user's data.
    (PS) If you asked me why don't I do this on each user's computer?  The reason is because some of them do not have a computer, and for those who does have computer, most of them do not have iTunes installed.

    In summary, there is no way, for me to fully restore all apps that my users had installed (purchased / free), without authorizing their Apple ID's to iTunes on the computer which I am using to perform the iOS upgrade for them ?
    However, I found out it is possible that my nightmare will end after all devices get upgraded to iOS5. Through some tests that I did, I found an interesting fact:
    - Backup to iTunes:
    You need to authorize every single Apple ID on iTunes, so it can back up apps and restore for you.
    - Backup to iCloud:
    Since there is no action of authorizing, it will backup and restore all of your apps, whcih were installed by different Apple ID, or totally different than the ID of iCloud account. 
    *I tested this scenario by backing up a device with only 2 apps installed by 2 diffrent Apple ID's (of course, one of them is used as iCloud account to back up), this device has never been connected to iTunes on a computer, I performed a backup to cloud, wipe the device, restore from the cloud, and both apps, purchased by different Apple ID's, were restored!
    But I need to run more tests and confirm that it works.

  • Can I upgrade ios 4.2.1 to 4.3

    I currently have an Ipod touch 2nd g that has 4.2.1 and I want to upgrade.  I am unable to use any of the applications currently being advertised.  What can I do?

    Sorry, no. iOS 4.2.1 is the highest possible for the 2nd generation.

Maybe you are looking for

  • ILife 08 not include in Macbooks?

    Hi, I very interested in buying a new Macbook from the online Apple Store and clicked on the product page and was wondering if *iLife 08* was included in this purchase? When I looked on the page it only showed that *iLife 06* was included.

  • Exporting and importing movies in iPhoto - unrecognised format

    hi I am trying to export just a few movies from iphoto in my user account, to my daughters parental support account on the same mac. (I imported from her camera to my account by mistake and deleted them from her camera, but want them only to be on he

  • Horizontal scaling, with large amounts of binary data

    question about horizontal scaling. tried asking late last night, but no one was active. Basically, I have an app that needs to scale (by adding new machines all talking to a database in the backend). This is all fine, but I have some binary file stor

  • Now that i've backgraded

    this may be a long shot but is there anyway to get my itunes exactly how it was? with all the songs and the play counts and everything? i hate having to start over when it comes to this stuff! any help is appreciated?

  • Variables in URL iview

    Hi. We are going to create URL iview in Portal 60 SP15. When we create URL iview, We want to use variable for URL parameter. (For example <User.UserID>) Any idea ? Regards, Arnold.