Can we use a scheduler to automatically adjust event hub throughput units/

Hi there,
I want to use event hub as our solutions.  We have millions of event publishers and consumers.  The problem is, we do have peek time which is from 8:00 a.m. - 17:00p.m.  At night we may only have few messages.  I think event hub bills
against throughput units, so i want to buy more units before 8:00a.m. and reduce the amount at evening.  Instead of azure portal, I want to set up a scheduler to help me do this automatically.  I didn't find anything on web to tell me how to achieve
this goal.
Please help and advise.
Thanks,
Frederick

No. AQ is not supported by Oracle Streams. User defined and Sys.AnyData are not supported types.
You can create AQ propagation process from source to backup site. But you will need to dequeue both sites simultaniously.
Or you can create schadow table (

Similar Messages

  • Can I use apple configurator to automatically shut down iPads to preserve my school's bandwidth?

    Can I use apple configurator to automatically shut down iPads to preserve my school's bandwidth?

    No, not if you mean remotely. Configurator does not allow any sort of remote control of the iPads. It's only for setting them up when connected to your master computer. There may be third-party MDM systems that might offer some such remote control over WiFi connections, though I can't tell you any that do.  This of course will not work on any iPad that's not in your control (usually ones that the school owns) and can get set up with the MDM solution. If you're concerned about iPads and other devices that the students own personally, you may need to control your WiFi access points instead.
    Regards.

  • I have two questions. Are unlocked iPhone 5 available in apple stores in US? Can i use a factory unlocked iPhone 5 (GSM) anywhere outside united states?

    I have two questions. Are unlocked iphone 5 now available in Appple Stores in US? Can i use a factory unlocked iphone 5 (GSM) anywhere outside the United States?

    The Apple (Republic of Ireland) online store has the unlocked Iphones 4, 4S and 5 for sale. They are dear but worth it. I ordered the unlocked I phone 5 last week. That said, retail Apple Stores do and will not carry the Iphone line instore. They do however sell some accessories for all Iphones but thats as far as the Irish retail stores go.
    Its obvious to me that the Apple sales strategy for the US is different to the Irish one, so your retail stores may carry the unlocked versions at some point in the future.
    Sorry I could not be of more help..

  • Can i use my time capsule with virgin wifi hub

    can i use 2tb time capsule with virgin media wifi hub router

    Yes, but it will need to connect to the Virgin router using a permanent wired Ethernet cable connection from one of the LAN <--> ports on the Virgin router to the WAN "O" port on the Time Capsule.

  • Adobe Acrobat 9 Pro: How can i use german quotation marks automatically in my formular?

    Only english quotation marks are used automatically.
    Thanks a lot for help!

    Hi John ,
    Please refer to the following links .
    https://helpx.adobe.com/x-productkb/global/find-serial-number.html
    https://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html
    Hope this will help to recover the serial number of your software.
    Regards
    Sukrit Dhingra

  • How can I use ONE Text search iView to event/affect mutliple Result Sets?

    hello everyone,
    i have a special situation in which i have 6 flat tables in my repository which all have a common field called Location ID (which is a lookup flat to the Locations table).
    i am trying to build a page with a free-form text search iView on Table #1 (search field = Location ID).  when I execute the search, the result set for Table #1 is properly updated, but how do I also get Result Set iViews for Tables #2-6 to also react to the event from Text Search for Table #1 so that they are updated?
    i don't want to have to build 6 different text search iViews (one for each table).  i just want to use ONE text search iView for all the different result set tables.  but, in the documentation and iView properties, the text search iView doesn't have any eventing.
    if you have any suggestions, please help.
    many thanks in advance,
    mm

    hello Donna,
    that should not be a problem, since you are detailw with result sets and detail iviews because custom eventing can be defined for those iviews.
    Yes, it says "no records" found because an active search and record selection havent' been performed for it (only your main table does).
    So, yes, define a custom event, and pass the appropriate parameters and you should be fine.
    Creating a custom event between a Result Set iView and an Item Details iView is easy and works. I have done it.
    See page 35 of the Portal Content Development Guide for a step-by-step example, which is what I used.
    For my particular situation, the problem I'm having is that I want the Search Text iView's event (i.e., when the Submit button is pressed) to be published to multiple iViews, all with different tables.  Those tables all share some common fields, which is what the Search iView has, so I'd like to pass the search critera to all of the iViews.
    -mm

  • Can I use different booking forms for different events?

    My client has multiple events running at the same time. Some paid, some free. I've created seperate booking forms for each, but can't figure out how to apply them to the events.
    Anyone know how to do this?
    Online chat doesn't answer and suggested that I post it here.
    Thanks!
    jerry

    Yes, it's working, but still in the process as the site is undergoing other changes. Learned the detailed work-through from two tutorials on kiyuco, including one for a web app.
    Still, it's an odd process where you need to pay a subscription fee to a third party for tech support which should be coming from Adobe. Also noticed that BC's "new, improved help and support" is little more than links to bcguru tutorials, another paid subscription service.
    Thanks for the follow up!
    - jerry

  • Can we use the built-in Row fetch for Multiple reports in a page?

    I need to create a page with multiple report regions. Each of it is based on a table. Those tables are different. I somewhat remembered that we can NOT use the built in automatic row fetch process if there are multiple report regions, neither the built in DML process. You have to make your own fetch and insert/update/delete process if you intend to.
    Also if I write my own row fetch and update processes, do I have to consider lock mechnism? or just simply write select and insert/update?
    Any input is appreciated.

    I think I found the answer. Would Scott or other gurus take a look at the thread and confirm it, in case the limitation is not in 2.0?
    Re: automatic row fetch
    What I am concered about is that the locking mechanism. If I have to write my own process to fetch and insert/update, other than the regular select and insert/update statements, do I have to put commit by myself, or htmldb can handle it automatically? Is there an example for this?
    Thanks in advance.

  • Using Supplier Scheduling along with eCommerce; how does this fit into ASCP

    Hi,
    In Oracle 11i we are using Supplier Scheduling along with eCommerce to publish our MRP forecast via EDI 830/DELFOR. We use autoScheduling which requires MRP and in 11i we run MRP, so it all works well.
    Now we are moving to 12i and using ASCP (Advanced supply chain planning) and I understand that we do not need to run MRP any more. ASCP in conjunction with PS (Production Scheduling) will do the trick.
    Given this situation how can I use Supplier Scheduling / eCommerce to publish EDI 830/DELFOR?
    Appreciate any input in the right direction.
    Thanks!!!

    any body...some body...please help!!!

  • Can I use the same Itunes registration with with a new Ipod touch

    I have purchased the latest Ipod Touch.
    Can I use the same regristration on Itunes  to sync the new Ipod touch?
    and
    can I use both the old and the new Ipod touch united for the same regristration??

    - If you mean another version of the iTunes program on your computer the answer is now.  You need the latest version of Itunes and your Win 7 can handle it.  BTW you can only have on instance of iTunes on a computer.
    - I you mean an iTunes account, the answer is no.  You can use one account for an umlimited number of iDevices.

  • Can I use my Ipad2 in Ireland on their power

    Traveling to Ireland. Can I use Irish electrict power for my Ipad2

    Yes, the charger unit operates with voltages from 110-240.
    Stedman

  • HT2737 My apple account is in the USA and i got itunes gift card from the UK. Can i use it @ my America itunes store

    can i use the itunes gift card i got in the United Kingdom in my USA itunes store?

    You cannot.
    Gift cards are country specific
    Sorry
    Give it to someone who lives in the U.K

  • Can not use 'AT LINE-SELECTION' with SET PF-STATUS

    Hi experts,
    my code is like below:
    PARAMATERS: .....
    SET PF-STATUS 'st_nam'.
    Perform Load_data . ' For list display
    START-OF-SELECTION.
    AT LINE-SELECTION.
      Perform list_detail.
    AT USER-COMMAND.
      CALL SCREEN '1001'.
    END-OF-SELECTION.
    When I execute the report , the basic was displayed , but when then i double click on the list to call the next screen '1001'. It did not work , but if i omit the SET PF-STATUS m AT LINE-SELECTION worked week , so in this case what has happened i how can i solve this problem,
    Thaks,
    PS: Reward immediately

    Hi,
    Thank you very much for your helpful answers, I have copied the report downto my system and test it , When i used SET PF-STATUS , i can not use AT LINE-SELECTION to capture events ...May be we can not use these 2 statements in parallel,...:D
    Thanks,

  • I live in the uk , can I use a pay as you go sim in my iPhone 4S in United States

    I live in the uk and have an iPhone 4S, can I use a pay as you go sim in the United States ?

    Yep.
    But, the US is not like Europe...your choices are very limited, as in only one real choice: T-Mobile.

  • Can i use the 'Record' feature in Applescript editor to automate bulk mail

    Hi,
    Is it possible to use the 'Record' feature of the Applescript editor to create a script that will automatically copy a website address into a new email message and then send that email message to everyone in my Friends category from the Address Book.
    I want to do this because I want to alert my friends to changes on my website once a week, but I don't want to have to sit and type out the email and copy the website address and everything like that. So I was thinking I could do it with one click using Applescript.
    Is that right and how dangerous is it. Like if i somehow manage to mess up the script can I just delete it and start again without causing any damage to my Mac
    Thanks
    Jason

    JayTelford wrote:
    Hi,
    Is it possible to use the 'Record' feature of the Applescript editor to create a script that will automatically copy a website address into a new email message and then send that email message to everyone in my Friends category from the Address Book.
    I want to do this because I want to alert my friends to changes on my website once a week, but I don't want to have to sit and type out the email and copy the website address and everything like that. So I was thinking I could do it with one click using Applescript.
    Is that right and how dangerous is it. Like if i somehow manage to mess up the script can I just delete it and start again without causing any damage to my Mac
    Thanks
    Jason
    Perhaps I should make myself more clear what I want to do.
    I want to do the following.
    1: Open Mail
    2: Create a new email message
    3: Set the recipients from my contact group "Friends" so that everyone in my my 'Friends" contact group will receive the email
    4: Set the subject as: "Check out these great new updates to my site"
    4: Set the body of the mail message as follows:
    Hi There,
    Thanks to you all for subscribing to these updates. Here are this weeks updates from Jason's Online Mag. [website address]
    Regards
    Jason Telford
    http;//web.me.com/jasongtelford
    5: Send the email
    Am I correct in thinking that I will need to use Automator and schedule the automation to run a script as per a weekly iCal event.
    If this is correct, then how would I do that. Can I use the 'Record' feature of Automator and the Applescript Editor, to create the automation and the script. I am new to doing this kind of thing so I am unsure of the procedure for accomplishing the task I described above automatically.
    Also I should apologise for not making my original post clearer.
    Regards
    Jason
    Message was edited by: JayTelford> Corrected a spelling error

Maybe you are looking for