Can we use aggregates with Virtual Characteristics?

Hi,
  My question is "Can we use aggregates with Virtual Characteristics?"
Is yes then how and if no then why not.
Thanks for your contribution
I have been researching the topic myself and I dont think its possible and even using OLAP cache is not possible.
Message was edited by: BW Novice

You can use aggregates with virtual characteristics. Just make sure that all the data you use for calculation is in the aggregate.
Example:
You have a query that shows MYVC (my virtual characteristic) in the rows and 0AMOUNT in the columns.
MYVC calculates out of VCBASE1 and VCBASE2.
An aggregate that consists of only MYVC doesn't work, an aggregate that consists of MYVC, VCBASE1 and VCBASE2 works.
Best regards
Dirk

Similar Messages

  • If i buy Unlocked Iphone 5s from Virgin Mobile can i use it with other operator?(In Europe)

    If i buy Unlocked Iphone 5s from Virgin Mobile can i use it with other operator?(In Europe)

    You need to clarify where you are as Virgin Mobile are a Global Mobile Virtual Network Operator (MVNO) brand however the terms and offers differ in each country.
    If you are in the USA the brand is actually franchised and operated by Sprint .
    Operating on Sprint CDMA and LTE frequency bands.
    The CDMA radio will be provioned to work off of the Sprint towers - This IS locked down and can't be used on any other network -for instance Verizon.
    The phones GSM Sim card holder and radios should be unlocked but we won't know for sure until the handsets are available to test.
    The models in question are the A1453 - 5S ad A1456- 5C- these support the most channel frequencies of any iPhone , however NOT the all important European LTE band 7 (2600mhz)
    So it is highly likely that the Virgin USA model will have unlocked SIM and GSM support will work on all European 3G and most earlier 2 and 2.5G networks however may have patchy to no European LTE support.
    Note that comment reqarding 2G (GPRS) and 2.5 G (Often called Edge) - A number of European countries and mobile operators are re-provisionng (reusing) frequencies in the 800mhz spectrum to 800DD (digital) for future LTE and where this takes place normal subscibers without LTE contracts will loose service in some areas.
    This is already taking place in the UK - Beware.
    Virgin Mobile UK are not currently an Apple iPhone dealership.
    And other countries with the band including Canada, France and India I have information about.

  • Using Logic with virtual guitarist

    I'm trying to use logic with virtual guitarist. Do you use this as an instrument or midi? When I use it as an instrument virtual guitarist does not follow logic tempo. And when I use it as a midi track I can not play it since virtual guitarist is not a hardware. Any sugestions?

    VG is a virtual instrument. If you want to use it within Logic, you need to convert the .vst into an AU (Audio Unit) so Logic can see and use it as .vst isn't supported anymore in OS X.
    The .vst to AU conversion is best done via the VST-AU Wrapper application, available from the http://www.fxpansion.com website or your local dealer. No, I don't work for them, but I use the wrapper extensively for older .vst instruments in Logic.
    If you need more detail information about this (and Virtual Guitarist in particular), you may want to check the VG forum here : http://bornemark.se/forum/viewforum.php?f=4&sid=a4bd0b1112e9d381261c09d8160fc1f7

  • I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way?

    I ordered my Macbook Air with Aperture two years ago. I now have an iMac - can I use that with Aperture in any way? I appreciate that it is a different computer but I am now the end user of both devices and I was just wondering if it was possible.
    Thanks,
    Sean

    The answer would be in your software license agreement for Aperture. However if you cannot locate it you can ask in the Aperture forum, the link for that is:
    https://discussions.apple.com/community/professional_applications/aperture
    However I believe you can have Aperture installed on two machines however only one may be using it at a time.
    On the new iMac launch the Mac App Store - Purchased - look for Aperture and download to your new machine.

  • I installed 5 but now I can't use it with Mac osx - how do I go back to my old version?!

    I was prompted to install Firefox 5 on my Mac. Now when I try to open it says I can't use Firefox with osx. How do I go back to using the previous version - has it been written over? My previous version was fine!

    Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

  • I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    I gave my old iPad to my daughter without restoring it to original configuration, how can she use it with her iTunes?

    try
    http://support.apple.com/kb/ht2589

  • How can I use LCCS with ActionScript 3 and Flash CS4?

    Hi,
    Using Stratus I was able to create an an application using Action Script 3 and Flash CS4.  The sample code on the Adobe site was quite straight forward and easy to understand.  I now want to switch over to  LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS.  Do I need to know Flex to be able to use LCCS?  Everything was quite simple and easy to understand with Stratus and makes complete sense.  But LCCS is really confusing.  Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client.  There is nothing in the  LCCS SDK that covers Flash and Action Script 3.  Please help!  I found the link below on some forum but it takes me nowhere.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

    Thanks Arun!
    Date: Thu, 29 Apr 2010 11:44:10 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
    Hi,
    Welcome to the LCCS world.
    Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a  pretty basic app, but should help you moving.
    We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
    Thanks
    Arun
    >

  • How can I use Bluetooth with another devices?

    How can I use Bluetooth with another devices?

    You can set up your FaceTime account in Settings > FaceTime.

  • How can i use ipad with apple tv

    How can i use ipad with appletv

    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store.

    How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store. 

    Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

  • Can i use pandrive with iPad, i want to access word, excel, pdf files on iPad via pandrive

    Can i use pandrive with iPad, i want to access word, excel, pdf files on iPad via pandrive

    You cannot use pendriver.
    Have a look at the following:
    http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
    http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
    http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
    http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1

  • My iPhoto icon has a cross over it, when i open it, it You have "iPhoto" 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?

    my iPhoto icon has a cross over it, when i open it, it You have “iPhoto” 9.2.1. you can't use this with this version of OSX? it used to work ?what's gone wrong?

    iPhoto 9.2.3 is incompatible with MacOS 10.9.3 Mavericks. If you are running Mavericks on your system you need to update iPhoto to 9.5.1. Only, the problem is, that this version is no longer available at the App Store.
    The easiest way to get a compatible iPhoto version in that case would be to upgrade to Yosemite, MacOS X 10.10, and then download the most recent iPhoto version from the AppStore, iiPhoto 9.6, like LarryHN suggested.
    If you cannot download iPhoto after upgrading to iPhoto 9.6 post back.

  • HT2499 Can I use Airplay with dvd to watch dvd on my tv via AppleTV 3?

    Can I use Airplay with dvd to watch dvd on my tv via AppleTV 3?

    Welcome to Apple Support Communities
    Of course. If your Mac is compatible with AirPlay Mirroring, you can watch your DVD in your TV with the Apple TV. Read > http://support.apple.com/kb/HT5404 You just have to play the DVD on your MacBook and turn on AirPlay Mirroring.
    If your Mac isn't compatible with AirPlay Mirroring, you can use a third-party app like Beamer

  • I can't use Quicken with Lion.  Now what?

    I can't use Quicken with Lion.  Now what?

    Peter,
    Another solution, though not particularly convinient, would be to create a Snow Leopard boot drive on a external drive that you can switch to when you want to run Quicken.
    Matt

  • Can I use Ping with Russian App store account?

    I have a russian App Store account. Can I use Ping with it?
    And if I can't, Can I make an USA App Store account without a card?

    Put a credit card in the payment methods. The credit balance will be used first and the remainder charged to the card.

Maybe you are looking for

  • How to remove symbol of line selection in module pool

    Hello Experts, I am working on a module pool where I have created a line selection. In this line selection when we click on the order number I have made a coding where it call new transaction. But I dont want the default symbol which comes during lin

  • Skip hierarchy level when null is present

    Hi All, Can we skip a level from dimension hierarchy if there is a null value. If so can any one please tell me how can we achieve this. Thanks in advance

  • DQE connection to BW server showing failed connection

    hi hanif here,i hav created a system for BW and using the DQE string to acces that.but i am facing some problem in it regarding the WAS path.for normal iViews that system shows iViews but for DQE Iviews it fails.For both the WAS path is different i.e

  • No usb sticks show up on my mackbook pro

    Hi, I have a big dilema, any usb stick that i insert does not show on my macbook pro. Card readers work, Usb Drives (backup drives) work but USB Sticks don't work at all. I have tried about 3 or 4 different ones. Some error happened about a week a go

  • Material where-used list

    hi all, i was given a list of hundreds of components and is there any tcode that i can use to derive the bom (to get the finished product)? regards.