Can we use BO4 universe on BO XI 3.1

Hello,
We use BO XI 3.1, we acquired a new application with some basics reports delivered on BO4 universes. Could we use these universes on our BO XI 3.1 ?
In addition, i shall add that we still use BO XI 3.1 because we have not been able to migrate our reports (almost 80% of existing reports) build with "SQL à la carte" method  on BO4.
Thanks & Regards,

Hi,
I don't think so it is possible.If universe in in the BI 4.0 then only you can access that universe via BI 4.0 Launchpad only.
What is the way you are thinking to access the BO 4.0 universe in BO 3.1?
See attached SAP Note which is for Crystal reports compatibility.similar might be this approach will apply on the other components.
1219678 - Error: "Access denied. You cannot log on to an older version of the CMS."
Amit

Similar Messages

  • Firmware 2.2 Help! I can't use a Universal Base Dock!

    Hello!
    I've been looking for hours on Apple but I can't find the Firmware 2.2 of iPod Touch 2G!
    The mean reason for I've been looking for, it's because my dad gift me this christmas a Universal Dock with black box from Apple, but when I put the iPod in, in a few seconds there's a message that says: This accessory isn't compatible with iPod.
    I don't wanna have a Universal Dock without any use, it's completely new but I've read that I need the old firmware for iPod to use it. If someone can tell me from where can I get the firmware, I will thank you!
    *Please Apple help me!*

    There is no legitimate way to downgrade the iOS.

  • Can I use an universal infrarot remote control? Menue security says yes, you can use every bla bla, but i tried my luck with two different models, no funktion!

    Hello from Germany,
    I bought an cheap universal remote control (infrarot) because apple says...you can use every infrarot remote control, but no! No function.
    It doesn't work, mh! It is necessary to by the apple product or not, I don't want to waste my time with a wrong information.
    Thank you for answering

    http://store.apple.com/us/product/MC377LL/A

  • Can we use Result from another query in Webi using Bex uery universe?

    Hi,
    Can we use Result from another query filter option in Webi to create a report using a Bex Query universe?
    I need to create a report using two universes, one is Bex Query Universe and the other is Orcle universe. I have two queries, one is using Oracle universe; the other using Bex Query universe. I need to pass the Oracle data from the Oracle query to the Bex Query query to get the matched data from SAP Bex query.
    I used Result from another query in the query filter panel for the query using Bex query universe. But I got an error saying that 'A filter contains a wrong value. you cannot run this query. (Error: WIS 00007). The data used in the filter on both sides are the same. they are char.
    I have tested by using two queries from the same Bex query universe to see if the Result from another query filter option works. And I got the same error.
    Has anyone run into the same issue and if this is possible and what should be the solution?
    Thanks in advance!
    Edited by: BO_Haiyan on Oct 6, 2010 3:47 PM

    In that situation:
    Create two queries : Oracle and BW query.
    @ Report:
    As you have to see result set from both the Dataproviders, correct? To achieve thise one must have common dimension objects to merge them at report and use Objects those are coming from both queries to use them in single Table/Report.
    Unless you don't use Merge Dimensions, you don't get a chane to use both queries objects in single Table/Report. (It will give tooltip saying: You can't drop here -- Incompatable Objects)
    In case, if you don't have common dimensions, change object definitions to Detail objects, for those required.
    Hope it helps you.
    Thank You!!

  • HT4260 Can I use a Netgear Universal WN3000RP Wi-Fi Range Extender?

    Can I use a Netgear Universal WN3000RP Wi-Fi Range Extender with my Airport Express to extend the range?
    If so, is there anything that I need to do in order to configure my computer for it to work properly?
    Are there any disadvanges to doing this (speed, signal strength)?
    Thanks.

    You always want to stay with the same manufacturer if possible for your wireless needs to insure compatibility. If you have a recent version AirPort Express now, using another Express to "extend" the wireless signal will usually work well if there are not too many obstructions for the signal to overcome.
    We cannot say if the Netgear device might work for you or not.....it was not compatible with Apple when we tried a sample a few months ago.....but with wireless, you never really know.
    Let's just say that the product may not be as "universal" as the title might suggest. There are likely some footnotes in the Netgear materials that their product will not work with devices that use "proprietary" settings, as Apple does.
    If you try the Netgear device, let us know how it works for you.

  • I am traveling to India with my new iPad...to enable me to be online 24hrs a day to access my emails...do I just need a local sim card...also can I use a normal adaptor to plug in to charge or am I best paying for the apple universal kit....

    I am traveling to India with my new iPad...to enable me to be online 24hrs a day to access my emails...do I just need a local sim card...also can I use a normal adaptor to plug in to charge or am I best paying for the apple universal kit....

    If you have the AT&T 3G iPad then you can explore the SIM card. I'm not sure if India has the SIM network or another type. REgardless you should be able to access wifi.
    HOnestly, if I were traveling I'd get a plug adapter from a normal retail store. You can get a good one for $20 or less at your local retailer, Walgreens, Walmart, Target, probably KMart though I've not looked for them there. Best Buy and the office supply stores may also have them. You don't have to pay for the official one unless you want to. (I have 'over the counter' plug adapters so if I traveled I'd use what I have not buy another)

  • Can I download and use non-Universal Games like Bookworm and Word Whomp ?

    Can I download and use non-Universal Games like Bookworm and Word Whomp on my Macbook Pro? If I can, will they interfere with the computer's functions in any way? What about non-Universal widgets? Thanks.

    hi Chevaux - Welcome to apple discussions!
    i dont know how resource-intensive those apps are but you can certainly run them. if they are not universal binary they'll operate through an emulation layer called Rosetta. there's a performance penalty there, but if the app is not intensive in the first place, and/or you've maxxed out the RAM, you might very well not notice the penalty at all...
    i assume the same comments apply to non-UB widgets, but as i abhor Dashboard i don't use it at all.......
    cheers

  • Can create Webi report using multiple universe (multiple datasource)

    Hi All,
    Can we create a Webi report from multiple universe (can say multiple dataprovider & datasource)?
    Please suggest.
    Regards,

    You can bring as many sources together into one report as you like.
    However, to use them together you must have some common dimension, such as a particular Sold To Party, Business Partner, etc. You can then use merge dimensions to develop your report but you will need to be aware that dimensions that are NOT Common to both data providers cannot be used in a table combining two data providers.
    So, if data provider one has dimensions Resort, Product and Year and a  measure object Sales Value
    while  data provider one has dimensions Resort and Year and a  measure object Cost Value, you cannot use Product in a report but you can display Resort, Year, Sales Value and Cost Value together to show you how much revenue each resort is generating each year and how much it is costing you to do so. To have product in the report table, you would need to add it to data provider two.
    Hope that clears it up for you.
    Regards,
    Mark

  • I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

    A universal may work but reliability tends to be poor..
    You are much better using another airport .. extreme or express.. even a second hand older one.
    Or do not use wireless bridge or repeater.. simply run ethernet or use EOP adapters to a second WAP run independently of the main router.. it is far more reliable and far faster solution .. wireless bridge/repeater will halve your wireless speed.

  • Query for 'User Activity' Webi Line Chart using BO4.0 Auditor

    Need to create a webi line chart to measure  ‘user activity’ per month, year or day using BO4.0 Auditor on Oracle.    
    This question raises two sub-questions:
    What actions constitute user activity?  Is it concurrent logins by users?   I am confused if that would really give a true picture of user activity as users can log in and do nothing on the BO system.  
    If concurrent logins do in fact give a true picture of user activity then how do I go about creating a chart? What objects do I need to include in query?
    Please provide feedback?
    Thank u.

    Hi Ramil,
    Follow below steps to create a webi report for your requirement, launch Webi rich client and create a new webi report by selecting "BOEXI40-Audit-Oracle" (Audit universe)
    1) Select below objects in 'Result Objects' pane
    [Event Year], [Event MonthName],[Event DayofMonth], [Event Type], [User Name], [Total Event Count]
    2) Define below conditions in "Query Filter" pane
    [Event Type Id] In list 1015 AND [Event Year] In list "Select Year" (Prompt)
    3) Run query
    4) At report level create a new variable of type measure with the name "User Activity" with below formula
    =Count([Total Event Count]In([User Name];[Event MonthName];[Event DayOfMonth]) )
    (This formula will track  logout event of a each user in a day as well as in a month, it will take/count only one log out event of the user in a day as you desire)
    5) Create a table block as well as graphs as you desire
    i) For day wise user activity create a table/graph using: [Event DayofMonth], [User Activity]
    ii) For month wise user activity create a table/graph using: [Event MonthName], [User Activity]
    Let me know if you have any questions
    ~Manoj

  • How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.

    How can i use my smart TV as a second monitor for my Power mac (2010) via HDMI cable? i've made the connection but no options show in system prefs display.
    the computer:Mac Pro, Mac OS X (10.9.5), 2 x 2.66 Ghz 6-Core intel Xeon
    the TV: LG Smart tv

    The Mac uses a highly-parameterized universal Driver for every display. The parameters are set at certain times when a query is sent to your display. The display MUST answer with its name and capabilities, or the screen stays dark. A TV set that is off or "not paying attention" because it is set to a different port when the query occurs will rarely answer, and so will often remain dark.
    You can use tools in the System Report to see whether your display has been detected at all. If it has, the report will look something like this, but its name will appear:
    The times when the query is sent are:
    • at Startup
    • at wake from sleep
    • when the Mac-end of the cable is inserted
    • when using the Option ( Detect Displays ) button in displays preferences

  • The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is always talking.  How do I make her voice go away and my IPAD work like it should.

    The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking.  How do I make the voice stop and my IPAD work again. 

    If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
    Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
    The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
    Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
    So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

  • How can I use a variable in webi query filter

    I created a webi report using the fiscal year/month(period) field as a filter to show a window of 18 periods.  The report works just as requested using a between filter on fiscal period with prompts for both the start and ending periods.  Now I'd like to calculate the start period based on what was entered in the prompt for the ending period (e.g. enter 201106 for the TO prompt on the between statement and have the FROM statement filled in as 201001.)  I can create variables in the report to display both the user response to the ending period prompt and the calculated starting period, but I cannot figure out how to incorporate that calculated starting date into the FROM side of the between query filter.
    Any suggestions? 
    Thanks,
    Doug
    Sorry I got my froms and to's mixed up in the first draft. Edited by: Doug Roswold on Mar 4, 2011 6:27 PM

    Let me understand what you want to do.  You don't want to use two prompts, just one, insn't it?
    I mean, instead of:
    Filter area:
    Date between "From prompt" to "To Prompt"
    You want something like:.
    Filter area:
    Date between Variable  to "To Prompt"
    if I'm not wrong that's not possible to achieve in Webi Query  Panel.
    Can you modify your universe? The only way to achieve it is modifying your universe, creating your formula in the universe and assigning it to an object, so you can use this new object in your filter area like this:
    Date between MyUniverseObject  to "To Prompt"
    Edited by: PadawanGirl on Mar 4, 2011 8:15 PM

  • Can I use the Qosmio G20 as a mediacentre?

    Hello,
    Is it possible to truly use the Qosmio as a mediacentre?
    I want to have the Qosmio in one room and then connect it tom my TV and sound center in another room.
    For the picture I belive that the DVI out can be used but for the sound, what can be used?
    Everything should then be operated by the remotecontrol.
    Allt this seems to be possible (on papar) but I haven't been successful to make it as a speider in the web mediacentre in my home?
    Any of you?
    /Lars

    In my opinion for best sound quality you should use optical cable http://support.toshiba-tro.de/KB0/TSD57013M000UR01.htm
    About remote control I am a little bit confused: do you want to switch your Qosmio from other room through the wall or what? I also dont believe that you will be able to use some universal remote control for the Qosmio.

  • I have DocsToGo premium installed on my iPhone4s; can I use the same app on an iPad mini or do I have to purchase another one?

    I have DocsToGo premium installed on my iPhone4s; can I use the same app on an iPad mini or do I have to purchase another one?

    It shows up in the store as a universal app, so you should be ok to go.

Maybe you are looking for