Can we use CATTs in ECC 6?

Hi
Can we use CATTs in ECC 6. i heared that we can't use CATT in ECC 6 and we can use only SECAT.
Please clarify
thanks

Hi,
As CATT (SCAT) has several critical technical limitations, SAP developed
the testtool eCATT (TCode SECATT) and released it to customers.
I should inform you that CATT/SCAT has been phased out
and is not supported anymore by SAP.
Regards,
Aidan

Similar Messages

Control Charts , Can we use in SAP ECC 6

How do we use these in ERP SAP ECC 6.0 with ABAP

Hello Pubudu.
Can you be more specific please?
What exactly are you trying to do?
Jude

Can we use BCS component in ECC 6.0, without installing BI 7.0?

We have a unique situation. We have planned to migrate from 4.6B to ECC 6.0. We have FI- LC and we want to move to SEM-BCS 6.0 in ECC 6.0, without installing separate BI (netweaver 2004s) instance. Is that possible? If possible, will there be any performance issues? If we use BCS in ECC 6.0, does it eliminate the job of FS data extraction to BW-SEM?
Do we need a separate BI system, which can also include SEM-BCS? What are the advantages?
We look forward for advice.

We found that without installing BI 7.0, BCS component (with its own internal BI) is working in ECC 6.0. In earlier ECC 5.0 or R/3, such facility was not available.
My question is that "Is it good to use SEM-BCS with in ECC 6.0" or "Is it better to have separate BI instance, which can include BCS" . Either answer has to be supported with points. Appreciate any assistance.

Can we use NWBC with both SRM and ECC

HI
Can we use NWBC both SRM and ECC . or do i have to use EP .
Thanks,
Pooja

Hi
Hope this will answer your question
ECC Transactions in NWBC Browser SRM 7.0
Thanks,
Ashish

Catt in ECC 6.0 version

Hi all,
When I am trying to create CATT in scat tcode in ECC 6.0
its giving error message
realeases higher than 6.0 are not permitted.
Can someone tell me how to create catt in ECC 6.0 version.
Regards,
Sudha.

SAP users use CATT frequently to upload master data or to make changes to master data records. SAP Consultants and Abapers tend to use it for creating test data. The transactions run without user interaction. You can check system messages and test database changes. All tests are logged. The CATT records your keystrokes while performing the actual transaction. You then identify the fields that you wish to change in that view. Then export this data to a spreadsheet to populate with the data required. This is uploaded and executed saving you keying in the data manually.
To perform CATT, it has to be enabled in your production environment (your systems administrator should be able to do this - SCC4). You will also need access to your development system to create the CATT script.
The process of uploading data with a CATT:
Activate CATT in your client
In transaction code SCC4 - click the change button
Double click on the client number
In the Restriction section, tick Allows CATT processes to be started.
Upload data using CATT
1. Create Import variant for the fields you need
Transaction SCAT
Goto Parameters
Create Import Variant
Goto Variant -> Edit
Goto Variant -> Fast entry or F9
Duplicate 01
2. To change the MRP Group for a list of Material
Assuming that I want to change the MRP Group for a list of Material.
My text files should look something like this:
Variant ID Variant Text &ZDISGR &ZMATNR
--> Parameter texts MRP group Material
--> Default Values M1 A001
Changes to the default values displayed above not effective
#01 M1 A001
#02 '' A002
#03 M1 A003
Note : '' denotes a blank in the field. e.g. Material A002 MRP group will be replaced by a blank.
3. Configure the recorded entry fields to read from the imported text file data
In the CATT : Maintain functions test case Screen
Double click on the Object Name
Double click on the screen number with your desired fields
Park the cursor on the fields
Click Edit -> Details
Fill in the Parameters Name and Field Contents
Finish Save it.
Assign your text file data.
In the CATT : Execute test case Screen
Click External from file and choose your text file
CATT will now read from your text file and update whatever data you have specified.
you can also go through this link to get even more details on it..
http://www.sap-img.com/sap-catt.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ae/410b37233f7c6fe10000009b38f936/content.htm
http://www.sap-img.com/sap-catt.htm
https://wiki.sdn.sap.com/wiki/display/ERPFI/CATT%20-%20Computer%20Aided%20Test%20Tool
Reward points if useful.

Can we use receiver enhancement feature for a web service scenario?

Hi Experts,
We have to send across an invoice to web service enabled legacy system from ECC.
ECC>ABAP Proxy>SAP PI>SOAP Adapter>Legacy System1
ECC>ABAP Proxy>SAP PI>SOAP Adapter>Legacy System2
Requirement is like if the invoice number starts with 1A, it should go to Legacy System1 & if the invoice number starts with 2A, it should go to Legacy System2.
Can we do it in one single scenario using receiver enhancement and if yes How?
Regards
Nidhi Kukreja

You can make use of the XPATH function starts-with(string1,string2) and customize your condition as shown in this blog:
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
Update:
It can even be done without using any XPATH function.....just make use of the option Contains Pattern from the dropdown available for the Middle Operand....right operand will be 1A*
Regards,
Abhishek.
Edited by: abhishek salvi on Feb 3, 2010 1:00 PM

What Function Module can be used to create vendor master data in SAP R/3?

Hello -
I've been trying to find a standard SAP delivered BAPI that can be used to create vendor master records in ECC 6.0. Up to this point I have not been able to do so. With SAP MDM solutions and SRM solutions it seems logical that SAP would deliver a standard BAPI that can be used to create vendor master records in the ERP/R3 environment (similar to the BAPI_MATERIAL_SAVEREPLICA for creating material master data records).
I have been able to find BAPI_VENDOR_CREATE but this only calls the online transaction and does not offer much additional functionality beyond what transaction code XK02 already offers.
The next best alternative appears to be IDOC_INPUT_CREDITOR but our preference would be to not use IDOCs for the project we are working on.
Can anyone offer any insight or personal experience on how vendor master records have been successfully interfaced with SAP R/3? Did you have to use IDOCs or create a custom RFC call? Thanks for the help!
Rich Wortmann
<< Personal information removed >>
Edited by: Rob Burbank on May 14, 2009 10:43 AM

Quite a gap in the BAPI arsenal. I think the options are IDoc, which you don't want, good old program RFBIKR00 (requires flat file for input, can be used via LSMW) or DIY (very complex).
Thomas

Amount in Bar Code is incorrect;Amount in the line item can be used instead

We have a problem in our Brazil company code.
When we have a document with value higher than 5,000.00 BRL it is subject to Pis/cofins tax. In the Boleto (paper) document the amount is after tax deducted. But we see the full amount in the Vendor line item in SAP
When the system reads the bar code and saves this code in the vendor line item during the document change we get a warning message no."8B797: Amount in Bar Code is incorrect;Amount in the line item can be used instead".
And the amount in the Barcode line automatically adjusts itself to the line item amount which is the pre-tax amount (full amount).
Example: Amount in the SAP Invoice doc is R$ 6,268.72
Amount in Boleto (paper) R$ 5,977.22 (after deducting PIS/COFINS) - This amount appears in the bar code but once we press enter after the warning message it automatically adjusts to R$ 6,268.72 .
We tried few notes like 784748 to apply but it says it is obsolete. We are on ECC 6.0 Release level 11.
Regards.,
Raj/

answered through SAP note 784748

What FM can I use to check the budget in shopping cart?

Hi Gurus,
I want to check budget in shopping cart in badi BBP_DOC_CHECK_BADI in SRM.
Budget information is in ERP system (ECC 6.0).
What function module can I use to check budget in shopping cart?
How can I off standard budget check for specific cases?
My system is:
SRM 7.0 (SRM_SERVER 700 Level 8)
ECC 6.0 (SAP_APPL 604 Level 6)

Hi,
Please look at FM B470_BUDGET_READ in SRM.
Regards,
Masa

Can we use Badi BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time

Hi everyone,
We need you help. We are working in SRM 7 and ECC 6 EhP 4. We have a doubt. Can we use badis BBP_SOURCING_BADI and BBP_DETERMINE_LOGSYS at the same time in a classic scenario?
We want to create the contract in ECC, and then we want to return the SC in SoCo in order to create the PO with the SC and the contract.
We activate both, but the SC is not returned in SoCo.
Thanks,
Ivá

Hi Ivan
You can use both badi to change srm standard behavior.
but one shopping cart item and it can have only one follow on document either Contract or Purchase order.
i presumed that you want to use same sc for two purposes to create both SC and PO but it is not possible.
for example
shopping cart item has follow on document created as a contract But you need to create a another shopping cart to create a Purchase order w.r.t that contract .
Once follow on documents are created sourcing flag will be removed .- rule
BBP_SOURCING_BADI - you can write your custom logic and make way to cockpit .
BBP_DETERMINE_LOGSYS - Determine your logical system.
Muthuraman

Step for Ibase creation in CRM 7.0 using equipments from ECC 6.0

Hi all,
I would request you guys to share the steps which I need to follow for the download of equipments from ECC to CRM 7.0 and automatic creation of Ibase with equiqment as Indivdual object and with details like partner etc.
I would be happy if you guys canb share any document with steps.
Regards
BABU

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

Solution manager can be used as repository DB with out-of-box integration?

Solution manager can be used as repository DB with out-of-box integration?
Hi ,
In Our Global SAP Environment, We are looking to use solution manager as a CMDB ( Config management DB) , which is kind of repository DB where it needs to keep track of infrastructure components .
A CMDB about Host consists of elements like
No. of CPUs,
RAM size,
...etc
For example in solman SMSY , you get some information about the SAP Host .
we have multiple CMDB systems , each one for our supplier .
For example Host hardware () CMDB is managed by Vendor1,
Storage CMDB by vendor 2 , and we need to join the both information , in order to get the Full elements of the Host .
A host information spread across the Multiple Vendor CMDBs.
Now we want to use solman as single CMDB, where Solman keeps track of some data , and needs to get some additional data from vendor1 by connecting into
their DB using the username/password ..etc
Does the solman has this Out-of-box functionality?
Thanks
Vasu .

Hi - smilar question
If we setup the system monitoring using solution manager , can we able see the TCodes & their screens from solman .
For example Can I able to control my ECC screens (SCC4, RZ10,SMLG,SALE,SPAD,SM59,.... ) from Solution manager ?
waiting for the reply .
Thanks
Vasu

Using CATT / WinRunner for converting Material Classification Data

The requirement is>......
The Classification Master Data to be created will be taken from the existing classification systems that are in the legacy systems at present and have valid object assignment. the data will be created manually. This data will be cleansed and may be modified based on cleansing and Data model decisions/new processes from P1. The file will be loaded into a CATT or WinRunner program into the new P1 system. The upload program must be able to handle Classes with multiple characteristics and Characteristics with multiple values.
Can anybody explain how can we go about doing this in CATT or win runner. Your help would be always recognised and duly points will be awarded. thanks in advance.

Hi Eliza,
I think rather than class type there should be Class Name e.g.
-<ClassHierarchies>
<Class>LIQUID_SAMPLER</Class>
<ParentClass />Zparent<ParentClass />
<Name_English>LIQUID_SAMPLER</Name_English>
</ClassHierarchies>
-<ClassHierarchies>
<Class>Zparent</Class>
<ParentClass />
<Name_English>ZPARENT</Name_English>
</ClassHierarchies>
One of the <ClassHierarchies> should not have ParentClass because there must be one class which is parent of all classes e.g. here ZPARENT
You should check that may be 001 is here also defined as class-name not class type. I would also say check do you have other ParentClass as Class name or not, except 001. Try to import this data in the manner as shown in MDM import Manager Reference Guide page 162 onwards using Create Hierarchy, after import check with business/functional consultant. Please have a look into it,
http://help.sap.com/saphelp_nwmdm71/helpdata/en/4b/72b8e7a42301bae10000000a42189b/MDMImportManager71.pdf
You can also use predefined import map for pre-delivered repositories like Material, Product etc.
Also, refer http://wiki.sdn.sap.com/wiki/display/SAPMDM/eClassTaxonomyinCustomRepositories
Regards,
Mandeep Saini

Can't uninstall and can't use minmise/maximise/exit buttons

I can't use the minmise/maximise/exit buttons top right, so I reset FF on the Troubleshooting page. That hasn't worked so I thought I'd try a new fresh download. I figure it's best to uninstall the exisiting version first so I went to control panel/add & remove but when I hit remove it flashes briefly and does nothing else i.e. no uninstall. I tried going through My Computer/Programs but clicking on the uninstall helper does nothing. Grateful for any help.
Troubleshooting info:
Application Basics
Name
Firefox
Version
19.0.2
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:19.0) Gecko/20100101 Firefox/19.0
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Microsoft .NET Framework Assistant
0.0.0
false
{20a82645-c095-46ed-80e3-08825760534b}
Important Modified Preferences
Name
Value
browser.cache.disk.capacity
358400
browser.cache.disk.smart_size.first_run
false
browser.cache.disk.smart_size.use_old_max
false
browser.cache.disk.smart_size_cached_value
358400
browser.places.smartBookmarksVersion
4
browser.startup.homepage_override.buildID
20130307023931
browser.startup.homepage_override.mstone
19.0.2
extensions.lastAppVersion
19.0.2
network.cookie.prefsMigrated
true
places.history.expiration.transient_current_max_pages
13396
plugin.disable_full_page_plugin_for_types
application/pdf
privacy.sanitize.migrateFx3Prefs
true
Graphics
Adapter Description
NVIDIA GeForce4 MX 440 with AGP8X (Microsoft Corporation)
Adapter Drivers
nv4_disp
Adapter RAM
Unknown
Device ID
0x0181
Direct2D Enabled
Blocked for your graphics driver version. Try updating your graphics driver to version 182.65 or newer.
DirectWrite Enabled
false (0.0.0.0)
Driver Date
4-7-2004
Driver Version
5.6.7.3
GPU #2 Active
false
GPU Accelerated Windows
0/1 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 182.65 or newer.
Vendor ID
0x10de
WebGL Renderer
Blocked for your graphics driver version. Try updating your graphics driver to version 182.65 or newer.
AzureCanvasBackend
cairo
AzureContentBackend
none
AzureFallbackCanvasBackend
none
JavaScript
Incremental GC
true
Accessibility
Activated
false
Prevent Accessibility
0
Library Versions
Expected minimum version
Version in use
NSPR
4.9.4
4.9.4
NSS
3.14.1.0 Basic ECC
3.14.1.0 Basic ECC
NSSSMIME
3.14.1.0 Basic ECC
3.14.1.0 Basic ECC
NSSSSL
3.14.1.0 Basic ECC
3.14.1.0 Basic ECC
NSSUTIL
3.14.1.0
3.14.1.0

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
Try a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 19.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Can I use full load for daily loads in LO Cockpit extraction.

I am using LO cockpit extraction for 2LIS_11_VAITM and i am using delta load for daily load and I have following doubt.
Can i use full load for daily loads instead of delta in LO Cockpit extraction.
Because, my understanding is that full load always takes data from setup tables in ECC and set up tables will not have delta data.
pls reply. Thanks.

You are right abt the understanding that full load (atleast for the extractor at hand) brings data from setup tables. You are also right that delta records are not loaded into setup tables.
So if you plan to do full loads every day, you have to load the setup tables everyday. It is at this juncture that I have to remind you that, filling of setup tables requires a downtime of the system to ensure that no changes / creates happen during the process.
Hence performing a full load is not a very good approach to go by...especially when SAP made the job easy by doing all the dirty work of identifying changes and writing them to extraction queue.
Hope this helps!

Can we use CATTs in ECC 6?

Similar Messages

Maybe you are looking for