Can we use same item category as a default in both scenarios(Sales and STO)

Dear Friends,
can any one help m for the following
shall we go with same item category as a default in both scenarios (Sales and STO) if yes please guid me how to go ahead.
Regards
Nischal

Hi,
I am bit confused here Sales item categories are different and STO is come in MM module & in mm item categories are diffrent.
Can you explain from which point of view you considering STO
kapil

Similar Messages

Can i use same address pool for different remote access VPN tunnel groups and policy

Hi all,
i want to create a different remote access VPN profile in ASA. ihave one RA vpn already configured for some purpose.
can i use the same ip address pool used for the existing one for the new tunnel-group (to avoid add rotuing on internal devices for new pool) and its a temporary requirement)
thanks in advance
Shnail

Thanks Karsten..
but still i can have filtering right? iam planning to create a new group policy and tunnelgroup and use the existing pool for new RA and i have to do some filetring also. for the new RA i have to restrict access to a particualr server ,my existing RA have full access.
so iam planning to create new local usernames for the new RA and new group policy with vpn-filter value access-list to apply for that user as below, this will achive waht i need right??
access-list 15 extended permit tcp any host 192.168.205.134 eq 80
username test password password test
username test attributes
vpn-group-policy TEST
vpn-filter value 15
group-policy TEST internal
group-policy TEST attributes
dns-server value 192.168.200.16
vpn-filter value 15
vpn-tunnel-protocol IPSec
address-pools value existing-pool
tunnel-group RAVPN type ipsec-ra
tunnel-group RAVPN general-attributes
address-pool existing-pool
default-group-policy TEST
tunnel-group Payroll ipsec-attributes
pre-shared-key xxx

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

What is use of Item Category N(non-stock item) in BOM creation

Dear Experts,
What is use of Item Category N(non-stock item) in BOM creation ?
regards
rajakarthik

Hi,
This item category is used for components which are not kept in stock if they are used in a bill of material (BOM). Non-stock items can be entered in the BOM with or without a master record. To enter a non-stock item without a master record, you must simply enter a descriptive text.
When you use this item category, the system automatically creates a purchase requisition for these components,
Special functions
The following functions are supported for non-stock items
You maintain purchasing data for non-stock items in the bill of material.
In the planning run, the system generates purchase requisitions
instead of dependent requirements for components that are procured directly. When you configure your R/3 System for MRP, you can define whether direct procurement is triggered by the planning run or by production order management.
Product costing processes take valuation data from the BOM item.
The system determines the release strategy on the basis of the price data you enter. The material group is required to produce a purchase requisition.
Pavan

Use of Item Category Group

Hello All
can any one explain the functional use of Item category group maintained in CRM material master under basic data tab and also under sales and distribution tab.
what is the difference between two views and what happens if dont have value at Sales and distribution level.
Regards
Phani

Hi Phani,
1. Item category Group is just a key which comes from the Product master and helps in the item category determination.
Item category group in the Material Tab, is a general Item category Group valid for all sales areas.
Whereas the one maintained in the Sales and distribution tab becomes specific to that particular sales area.
For eg: To a Product HT-1011 u have assigned two sales areas say A and B
In the Material tab, we assign item category group NORM
In the Sales and Distribution tab, for sales area A , we assign item category group ZORM.
In the item category determination the following settings are maintained:
Assumption transaction type is TA.
Transaction Type: TA
Item category Group : NORM
Item category: TAN
Transaction Type: TA
Item category Group : ZORM
Item category: TANN
Now in the sales order if u enter product HT-1011 and choose sales area A, TANN will get determined, if u choose B TAN will get determined.
It is not mandatory to put the item category group. It onlu helps in the item category determination.In case u have not assigned any item category group, it will look for a item category dtermination entry something like:
Transaction Type: TA
Item category Group :
Item category: TAN
Wish this helps.
Regards,
Shalini Chauhan

Purpose and use of item category Text (6)

What is the Purpose and use of item category Text (6).
it is meant for which biz scenario?

Thanks for your explanation.
Sorry I am not convinced on this biz scenario what has been posted. Why to enter just the text in the form of PO and maintain record in the system . One can send a word document or simply put a call to outside party for sending legal document.
Moreover it hardly matters whether the PO is of less value or nil value. In standard also we use free goods in PO also. SAP, I think without any specific reason will not provide item category Text "T"- there must be some strong reason for it.
Also please note that item category text T is also allowed in scheduling agreement for document type LP and LPA. then simply entering text in scheduling agreement for item category does not make any business sense.
If anybody has come across the biz scenario, please share in the forum. I searched and went to thread on similar topic but could not find any convincing answer on this.

"Material type HALB cannot be used with item category L (plant 1000)"

Hi Guys
I am trying to copy the BOM of a material.
The error msg.
"matrial type HALB cannot be used with item category L (plant 1000)"
Diagnosis: you want to enter a new componet with material type HALB and item category L.
Settings in IMG for production (master data> BOM > Item data > define item category) determine that inventory management for this item category is to be based on quantity.
However, other settings in the IMG for material HALB in plant 1000 determine that the quantities are not updated in the material master. This means that you cannot enter this material with item category L.
Can anyone tell me how to correct this error please.
Thanks.
Ahmad Yahya

Hi Ahmad,
Follow this navigation path in SPRO
IMG: Logistics > Material Master > Basic Settings > Material Type > Define Attributes (OMS2)
Select a material type ( like in your case HALB) and navigate to Quantity/Value Updates. Now try to locate your plant to which you want to assign your BOM to. And then set the flags Qunatity Updating and Value Updating and save.
Now, you can come out of CS01(BOM creation) transaction and re-enter CS01. Now you can maintain the data and error will not come.
Regards,
Amol

How can I use same account in 2 iphone with diff contact list?

how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.

how can I use same account number but other all totally diff such as contact list, application, everything ..... I found that it's bad on IOS5.
when I used IOS4 .. old verison, I can keep my phone in diff data. Afte upgrade IOS 5, it's bad. Even take photo, it can not focus zoom in and out.

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.Ho can we change this so our phone information isn't visible to each other?

3 iphones in household.All use same apple ID.But all contacts get mixed between phones and facetime calls come in from other contacts.How can we change this so our phone information isn't visible to each other?

Use separate Apple IDs for each family member and use Family Sharing features of those things (if any) that you do want to share. https://www.apple.com/ios/whats-new/family-sharing/

Can I use same apple ID on two IPads? And how do I name new IPad..Thank you in advance for any help

Can I use same Apple ID on my old and my new IPad....and if so, how do I name the new iPad. want to keep games on one iPad and use the other for emails etc. Many thanks

Hi,
Yes you can definitely use the same Apple ID regardless of how many apple devices you have. This way you can install the apps that you have already purchased.
It really does not matter what name your iPad is. You usually rename them under Settings>General>About>Name>
Just a note if you use the same icloud apple id as well, both devices will recieve the imessages and facetime calls.
Hope that helps!

Find My Phone - can I use same user + password for 2 phones?

Just loaded the "Find My Phone" App on my new iPhone 4 and set it up. What a great tool for locating a lost iPhone. The only problem is that my wife and I have a joint mail and apple ID account.
So, my question is can I use Same user name (mail account) and password for TWO iPhone 4's (mine and wifes)? I assume that would work since each phone has a different serial number, and it seems to be ok when connected to my computer to sync each phone separately.
Any help would be appreciated, thanks.

My phone was stolen a few days ago. It must be flat by now, I have had it locked by my service provider, Find my Phone still works but says it's in Sydney, I live in Melbourne. Is this accurate? How can it still find the phone if it's not on?

How can I use same iTunes on iPad 64GB and iPhone 5 16 GB memory

How can I use same iTunes account on iPad 64GB and iPhone 5 16 GB memory

Just connect them your computer. iTunes will treat each device separately. Or if you mean iTunes Store account, you can choose what you download to each device, either directly from the iTunes Store or in synching from iTunes on your computer, as long as you don't have automatic downloads turned on.
Regards.
Forum Tip: This forum is for questions about using iPads in companies and organizations. Questions about the general use of iPads will normally best be posted in the Using iPad forum.

Can I use same account for android and PC and how ...

Can I use same account for android tablet and PC and how do I link both?

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

In Bte can i use same Product for 2 different process

in Bte can i use same Product for 2 different process

hi
as per i know yes but since there r two type of interface behaviour is defferent .
For
Publish & Subscribe interfaces
if any event occur in this type both the process can work simultaneously and they will not intervene each other
whereas in
Process interfaces
at an time any one process can be active.
Reward if usefull
Cheers
Snehi

Can we use same item category as a default in both scenarios(Sales and STO)

Similar Messages

Maybe you are looking for