Can we use the Extended Classic Scenario with MM-SUS

HI, expert :
    In extended classic scenario ,the PO created in SRM system ,and then replicated into the MM system .You can't change it in MM system .
    So, in this situation ,I want to know the MM-SUS can be suitable or not ?The PO can transfer from ECC to SUS ?
   If I use the decoupled scenario ,which one I can select ?MM-SUS or EBP -sus ?
   BR !
Alex!

Hi Alex,
as noted by Bill, in MM-SUS is the extended classic not possible at all.
By default it's also not supported in the SRM-SUS. Please see the note 543544. If you would like to activate this, you need to pay a consulting fee for SAP:
"Please note that the full scenario can be enabled by a consulting solution, compare OSS note 700350."
Regards,
Peter

Similar Messages

Are you using the Extended Classic Scenario ?

Hello everybody,
Is somebody using the Extended Classic Scenario - SRM 4.0 ?
If yes, could you describe briefly the config steps that you follow ?
I have received and followed some advices here and I have checked all the official documents without success.. =( Until now, for some reason the EBP tries to create the PO in the backend =(
Thanks for your help guys !
Regards from Mexico.
Diego

Hi Diego,
If you activated the Extended scenario, the system cannot try to create directly a PO in the backend, it first has to create it localy.
If you are sure that:
-You activated the Extended scenario in SPRO (and not in the BADI)
-The system tries to create directly the PO in R/3 (as you say in your post)
Then there are only 2 solutions:
1- You have activated the scenario BADI, and tell the system to work in classic scenario
2- You have a bug in your SRM (which I doubt, cause I implemented this scenario on EBP 3.5, EBP 4.0 and SRM Server 5.0, and I never had this kind of problem).
Regards.
Vadim

Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

Can I use the ipod classic as an external hardrive with time machine as well as an ipod for my mac book pro OS X?

No. Time Machine has been specifically written not to back up to an iPod.
(58364)

Freight is not updated in R/3 in the Extended Classic scenario

Friends,
Freight is not updated in R/3 in the Extended Classic scenario.
Once a PO is ordered, if a freight condition in SRM is applied, it does not get updated in R/3.
We have created a condition for Freight (Value and Percentage)in Create
Payment Conditions using the following menu path:
spro
--> Supplier Relationship Management
--> SRM Server
--> Cross-Application Basic Settings
--> Pricing
--> Process Payment Conditions
When creating a Purchase Order in SRM in the "Item Data" tab, there is
a"Pricing" option. Choose "Pricing" and select "Add Further Conditions"
from the drop down menu. Here Freight is available. Add Freight and
the PO record in SRM is updated with the Freight Condition. However,
upon ordering, the Freight condition does not transfer to the PO
recordin R/3.
We've heard this can be achieved by enhancement: only ie by implementing
set of BADIs.. But does anyone know WHICH BADIs we need? Or how we could find out? Thanks.

Hi
<b> You can either of these BADIs to handlwe the scenario.</b>
BBP_CREATE_BE_PO_NEW Exit while creating a purchase order in the backend system
BBP_CREATE_PO_BACK   OLD Exit while creating a PO in the backend system
BBP_ECS_PO_OUT_BADI ECS: PO Transfer to Logistics Backend
BBP_EXTLOCALPO_BADI Control Extended Classic Scenario
Hope this will help.
Please reward suitable points.
Regards
- Atul

How can utilize/use the extended space in system.img ?

Hello Guru's
In Oracle VM , How can utilize/use the extended space in system.img ?
a) Increased the system.img size using the following command:
# dd if=/dev/zero bs=1M count=12960 >> /OVS/running_pool/18_test1/System.img
b) Verified the added size of system.img file at OVS server.
# ls -lh System.img
-rw-r--r-- 1 root root 19G Feb 9 20:58 System.img
c) Started GVM and additional size/memory is not shown ?
# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
/dev/xvda2 3984 2292 1652 59% /
/dev/xvda1 92 12 75 14% /boot
tmpfs 512 0 512 0% /dev/shm
+ Tried working with resizefs , resize2fs , cmd did not work.
(GVM is created using Oracle provided template)
+ am i missing anything ?
Oracle VM Setup Detail:
oracle-logos-4.9.17-7ovs
enterprise-linux-ovs-5-0.17
ovs-release-2.2-0.17
ovs-utils-1.0-33
kernel-ovs-2.6.18-128.2.1.4.9.el5
ovs-agent-2.3-29
Thanks in advance for your help.
Best Regards
Basu

I am not positive what you did is going to work, but it seems like you did the equivalent of imaging a small disk on a bigger disk. In that case, the first thing to do is update the partition table with fdisk. Start with fdisk -l in the vm for general information about the disk. Hopefully, the additional space will show. Then, work with fdisk to use the extra space. The easiest is to add a partition, then a file system on it. It is also possible to expand the last partition (you might have to delete it first), then expand what is on it (may be RAID, LVM, or the file system), layer by layer. As usual with fdisk, you run the risk of thrashing it all, so you may want to practice on a copy first. Obviously, the extra space can only be added to the last partition of the small disk.
If the situation is more complex, you may have to boot a VM with both the small disk and the big disk at the same time. If you boot the VM off of an iso DVD image, you can then shell out, then run fdisk to partition the big disk the way you want, then use dd to copy the partitions you want in the order you want from the small disk. I am pretty sure not all combinations will work, but you get the idea. You can then take the small disk out, and boot off of the big disk.
Come to think of it, you might just be better off with adding more space as a second virtual disk. You would then be free to partition/format it the way you want without messing with the first disk. Linux is so good with disk management, so many options.
As a general statement, though, I like to put some distance between the high level file systems and the low level disk partitions, so I use LVM (Logical Volume Manager).
Best of luck, keep us posted.

Can I use my Ipod Classic(MC297ZP) with Sound Kick SFQ-04 via bluetooth

can I use my Ipod Classic(MC297ZP) with Sound Kick SFQ-04 via bluetooth

If you old charger is a USB (+5V output) it will work. If it is a Firewire charger (+12V) then I think it will still work, but Apple has removed Firewire charging from most of the new iPod lines including the iPhone and 4th Generation Nano. However I think that the 120GB Classic may be the last iPod to still charge off Firewire chargers.
It won't hurt anything to try it. If it doesn't work, you will get a screen display that states that the accessory is not supported or something to that effect.
Good luck,
Patrick

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

Can I use the Creative Cloud libraries with Illustrator CS5

Can I use the Creative Cloud libraries with Illustrator CS5

Hi Ilys Ravel,
No, Creative Cloud Libraries feature is only available in CC 2014.1 release on-wards.
Sanjay..

Can i Use The Apple Wired Keyboard With Camera Connector Kit

Can i Use The Apple Wired Keyboard With Camera Connector Kit
3g 64gb verizon

People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message. (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.) Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub. At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
And wired USB keyboard were never supported for the iPad. So there's no guarantee that it will continue to work with future iPad updates from Apple. So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use. If you have all the equipment already, I say give it a try. But I would not recommend trying a USB keyboard if you have to purchase anything.

Hey Guys I Travel to the States and I am from Germany. I want to buy an iPhone 4S 8GB white Version unlocked GSM. Can I use the iPhone in Germany with every SIM Card?

Hey Guys I Travel to the States and I am from Germany. I want to buy an iPhone 4S 8GB white Version unlocked GSM. Can I use the iPhone in Germany with every SIM Card?

As long as you buy from an Apple retail Store (Apple owned ) an unlocked iPhone 4S it will work on GSM services worldwide
from Apple.com
If you buy a SIM-free iPhone, you will need to purchase a GSM-compatible micro-SIM separately. When you travel internationally, you can use a micro-SIM card for iPhone 4s from a local GSM carrier.
The unlocked iPhone will not work with CDMA carriers such as Verizon Wireless or Sprint.
However the warranty will NOT be valid outside the US .If you need warranty or post warranty service you will have to return the iPhone to the US in person ( cannot mail in to US )

MM-SUS for the extended classic scenario

Hi,
I have done SUS-MM for the classic scenario.
Did anyone implement SUS-MM for the extended classic scenario ?
Did you face any problem or will it be same as 'classic' scenario ?
Please help
Thanks
Pranav

There shouldn't be any problem especially when the scenarios are concerned. Since the PO's moves from MM-SUS.
Regards, IA

Can I use the 40g/ipod charger with my ipad2?

Can I use the 40g/ipod charger with my ipad2?

Not the best idea, it'll overheat and could damage either the ipad or the charger. The iPad will be attempting to draw more wattage then the little charger is designed to put out.
Here is a link for the proper one http://store.apple.com/us/product/MC359LL/A?fnode=MTc0MjU4NjA
This would work for both :)

HT4628 I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken

I can not use the internal wireless card with my Mac pro 2012, I don't know if it is broken. The problem is happen recently, I have to use an independent wireless card now. Thanks!

When you enable Internet Sharing in OS X, you are creating a separate sub-net.
There is no option to allow this to be a simple pass-through from Ethernet to AirPort (or the other way).
The problem is easily solved by getting an inexpensive wireless router. You can replace your current router OR disable the DHCP server on the wireless router and allow the wireless clients to get an IP address from the current router.

I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

I would like to have my iPad2 mirror onto 2 TVs at the same time. Can I use the iPad HDMI connector with a HDMI splitter to accomplish this?

I don't want to spend the money on the HDMI connector and HDMI splitter if it won't work.

Can I use the old power supply with the new unit?

I have a second generation Apple TV. When I install the new unit next week can I use the old power supply with the new one and the new power supply with the old one? This would save some messing with cords behind the units.

Hello:
I would definitely not try that..... The power supplies may be compatible - or may not be compatible. I think messing with cables is a small price to pay for not potentially frying a new device.
Barry

Can we use the Extended Classic Scenario with MM-SUS

Similar Messages

Maybe you are looking for