Can we use the output of a report as in input for the other report?

Dear All,
I would like to know if we have any option in OBIEE where in we can save the output of a report and use it as a filter for another report?
My scenario is like:
1) I have a report on ORDERS which gave me 250 orders.
2) I want to have a report on SHIPMENT table for these 250 Orders.
Can we save the result of report 1 as a filter and use it in 2nd report?
please advise.
Thanks,
Suma

Hi,
By using advanced tab in filters like filter based on another request we can achieve this
Regards
Naresh

Similar Messages

I know I get 2 downloads. I have one on my Mac. Can I use the other for my PC laptop?

I know I get 2 downloads. I have one on my Mac. Can I use the other for my PC laptop?

Hello david,
that's correct. Cloud software can be installed on Mac and/or Windows for no extra cost. No platform swapping process is required.
On the Mac simply sign in to creative.adobe.com with your Adobe ID and download the software. Same as you did on the PC.
Hans-Günter

HT5312 I forgot the security answer also the email is incorrect. So can i use the other email to know the answer of security question

I forgot the security answer also the email is incorrect. So can i use the other email to know the answer of security question

The reset link will only work for the rescue email address that you currently have on your account. If it's wrong (you won't be able to change it until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to correct your rescue email address for potential future use

Can't use the other Hard Drive

A few days before that incident I had two hd showing up in System preferences (Startup Disk) but now I have only one hd. I used Disk Utility to erase my 2nd hard drive as MS-DOS (FAT) to run Windows 7 and since then, Only one HD is available but on my desktop I still had my second hard drive icon. I tried to re-erase it as Mac OS extended (Journaled) but still doesn't show up in the (Startup Disk) window. By accident in the (Disk Utilty) window, I think I merged the memory of my 2nd hard drive into the first hard drive and now when I try to split it into two partitions, an error message pops up saying '' The target disk is too small for this operation'' . Can someone help me please One HD showing up As you can see I've got 2 memory slots installedBut one HD is available Just under the second ASCBC, I had my other HD but since I merged it, it disappeared, How can I get my other memory slot working ? PLEASE

The top image indicating memory slots has NOTHING to do with your hard drive. That image illustrates the installed RAM. It appears that you have a single hard drive (STORAGE) with a capacity of 250GB on one partition that is full. You only have 16mb of storage left on that hard drive which is dangerously low.

Hello with 3Gs and Ios6, i can't use the numeric Keyboard

Hello,
I have doing the Update Ios6 of my 3 Gs, and i can't use the keyboard numeric.
I can't use the 'Q' with the keybord Qwerty, and i Can't use the 'A' with Azerty.
If i install the Icones Imoji, i can't use the other keyboard.
I can't del a keyboard, in the settings.
And i cant kill the first apply on the left of the screen.
I have doing 3 install of ios6 .
And i can't doing a downgrad.
It's not a prblem of my Screen because i have change him, and we have the problem.
It's a very big problem, i can't use my iphone.
Best regard

Firefox 4 requires at least OS X 10.5 and an Intel Mac.
You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

How to use output of one query as an input for another

Hi Gurus,
can you give me any links on how to use an output of one query as an input for another (preferably if this can be done in a dynamic/on the fly way)?
thanks

You can use Replacement Path Variable for this purpose. See this detailed documentation.
http://help.sap.com/saphelp_nw04s/helpdata/en/bd/589b3c494d8e15e10000000a114084/content.htm
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 19, 2008 9:48 AM

Can we use the built-in Row fetch for Multiple reports in a page?

I need to create a page with multiple report regions. Each of it is based on a table. Those tables are different. I somewhat remembered that we can NOT use the built in automatic row fetch process if there are multiple report regions, neither the built in DML process. You have to make your own fetch and insert/update/delete process if you intend to.
Also if I write my own row fetch and update processes, do I have to consider lock mechnism? or just simply write select and insert/update?
Any input is appreciated.

I think I found the answer. Would Scott or other gurus take a look at the thread and confirm it, in case the limitation is not in 2.0?
Re: automatic row fetch
What I am concered about is that the locking mechanism. If I have to write my own process to fetch and insert/update, other than the regular select and insert/update statements, do I have to put commit by myself, or htmldb can handle it automatically? Is there an example for this?
Thanks in advance.

How can we use the same package in our report used by some other report

how can we use the same package in our report used by some other report

Hi,
You just need to assign package while saving your report.
No extra is required providing you are aware of package to be used.

In VF01, before saving the billing document, can we use "issue output to"

In VF01 transaction before saving the billing document, can we use "issue output to" under Billing Document in Menu.
i.e., can we enable the option "Billing Document -> Issue output to -> Issue output to"

Hi,
No as a standard, unless the billing document is created and released to accounting, you can't use issue output to.
Regards,

My configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden". Can you help me

my configuration audio "output" is only numerique and I would like listen to audio by integrated loudspeaker. I can't use the keys "sound on my computer. If I click on I have a icon "forbiden". Can you help me

Si vous tappez sûr le cle <<option>> et cliquez vôtre souris de l'icon de haut-parleur
de le haut partie de sa Desktop, vous pouvez voir les choix pour le son: les haut-parleurs internales, Line out et Digital Out. C'est tout ! Ou cliquez de la Pomme a gauche, choissisez Préferences, et Son, et voila..... le meme chose.....
Merci d'avoir choisi Apple
John B

Can we use Dynamic SQL in Oracle Reports ?

Hi ,
Can we use Dynamic SQL in Oracle Reports ?
If yes please give some examples .
Thanx
srini

I believe the built-in package SRW.Do_Sql is what you are looking for
Example from the document:
/* Suppose you want to create a "table of contents" by getting the
** first character of a columns value, and page number on which its
** field fires to print. Assume that you want to put the "table of
contents"
** into a table named SHIP. You could write the following construct:
DECLARE
PAGE_NO NUMBER;
PAGE_FOR INDEX NUMBER;
SORT_CHAR CHAR(1);
CMD_LINE CHAR(200);
BEGIN
SORT_CHAR := :SORT_NAME ;
IF :CALLED = Y THEN
     SRW.GET_PAGE_NUM(PAGE_FOR_INDEX);
     SRW.USER_EXIT(RWECOP PAGE_FOR_INDEX
     P_START_PAGENO);
     SRW.MESSAGE(2,TO_CHAR(:P_START_PAGENO));
END IF;
SRW.GET_PAGE_NUM(PAGE_NO);
CMD_LINE := INSERT INTO SHIP VALUES
                      (||SORT_CHAR||,||TO_CHAR(PAGE_NO)||);
SRW.MESSAGE(2,CMD_LINE);
SRW.DO_SQL(CMD_LINE);
COMMIT;
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
        NULL;
WHEN SRW.DO_SQL_FAILURE THEN
        SRW.MESSAGE(1,FAILED TO INSERT ROW INTO SHIP TABLE);
WHEN OTHERS THEN
       COMMIT;
END;

How can I use the pulse train from a 6602 to trigger an niFGEN and niSCOPE on each rising edge of the pulse train?

Hello,
Here is my application: I need to use a 6602 counter/timer to generate a pulse train of certain frequency and duty cycle. On each rising edge of this pulse train, I need to output an arbitrary waveform on Ch. 0 of an niFGEN (5422) AND acquire data from CH. 0 of an niSCOPE (5124). I also need to synchronize the niFGEN and the niSCOPE to the same clock used for the pulse train (6602/ctr0). This process needs to continue until the user stops the system.
I can generate the pulse train using the 6602 just fine using ctr0, but the pulse train shows up on OUT0 by default. When setting up the niFGEN and niSCOPE to trigger on rising/positive slope edge, OUT0 is not an option for either device as a source for the digital rising edge (pulse train). The main options for both are PFI0-3 and RTSI lines.
Questions:
1.) Is there a way that I can direct the pulse train to a location (such as an RTSI line) where BOTH the niFGEN and the niSCOPE can use it as a start trigger for each rising edge? I noticed in MAX that a route can be made between ctr0's internal output and a trigger line and others. If this is a solution, could you please explain how to accomplish this?
2.) Once I configure the niFGEN and niSCOPE to be triggered on a digital rising edge, how can I effectively have this happen for every rising edge from the pulse train? In other words, can I just initiate the FGEN outside of the while loop and it will generate a waveform for each rising edge it sees at the source until the while loop is exitted?
3.) Is setting a reference clock for the niFGEN and the niSCOPE the same thing as synchronizing both devices using the same clock that generated the pulse train? It is not clear to me the difference, and why it would necessarily be useful.
Images of my current front panel and block diagram are attached. If you would rather have the actual VI's just let me know. Any help and/or explanation on this is greatly appreciated. Thanks in advance.
Attachments:
Front_Panel_Control.jpg ‏278 KB
Block_Diagram_Control.jpg ‏263 KB

Hello Cgifford,
Welcome to National Instruments Forums.
To output your signal to the PFI lines,
you can use external connectios between OUT0 and PFI lines. You can also use
the backplane to do so by routing into the same RTSI line.
1)
On the SCOPE and FGEN, the name of the
terminals are actually “PXI Trigger Line x/RTSIx” but on the 6602 you might
need to route the signal using the property:
You can also use the DAQmx route signal which perform the same opperation.
2)
This will depend on the frequency of
your pulse train. If this is lower than about 10 ms, then you can probably
place this on a loop and start and stop the acquisition every time. If the
frequency is higher than this, you will have to use:
- Scripting on the FGEN side (read more)
- MultiRecord Fetch (more information in the scope help file
section “Acquisition Functions Reading versus Fetching”).
3)
The short answer is yes. The longer one
might depend on how tight you need the synchronization to be (us, ns, ps). For
very tight synchronization, you should look into here.
Message Edited by Yardov on 06-18-2007 03:14 PM
Gerardo O.
RF Systems Engineering
National Instruments
Attachments:
property.JPG ‏7 KB

Macbook Pro 2.53 mid 2009 came with 60 watt magsafe can I use a 85 watt without issues also can i use the new aluminum tip one?

My macbook came with a 60 watt magsafe charger with the white magnetic tip. It crapped out on me and now need to buy a new one but everyone says it uses a 85 watt which is false since i bought it new and the 60 watt charger came in the sealed box.
1. If I buy the 85 watt will it damage my macbook pro?
2. can I use the new magsafe charger with the new aluminuin tip with my macbook pro?
Look below in red is the proof
15-inch Configurations
Enclosure
Precision aluminum unibody
Processor
2.53GHz Intel Core 2 Duo
2.66GHz Intel Core 2 Duo
2.8GHz Intel Core 2 Duo
L2 cache
3MB shared
3MB shared
6MB shared
System bus
1066MHz
1066MHz
1066MHz
Memory
4GB (two 2GB SO-DIMMs) of 1066MHz DDR3 SDRAM; supports up to 8GB
Hard drive4
250GB Serial ATA; 5400 rpm
320GB Serial ATA; 5400 rpm
500GB Serial ATA; 5400 rpm
Slot-loading optical drive
8x SuperDrive (DVD±R DL/DVD±RW/CD-RW)
Graphics
NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
NVIDIA GeForce 9600M GT graphics processor; and NVIDIA GeForce 9400M graphics processor with 256MB of DDR3 SDRAM shared with main memory3
Graphics memory
256MB GDDR3
512MB GDDR3
Video
Built-in iSight camera; Mini DisplayPort output port with support for DVI, VGA, and dual-link DVI (requires adapters, sold separately)
Display
15.4-inch (diagonal) LED-backlit glossy widescreen display, 1440-by-900 resolution
Expansion
One FireWire 800 port (up to 800 Mbps), two USB 2.0 ports (up to 480 Mbps), SD card slot
Audio
Built-in stereo speakers, built-in omnidirectional microphone, combined optical digital input/analog line in, combined optical digital output/analog line out
Networking
Built-in 10/100/1000BASE-T (Gigabit) Ethernet
Wireless
Built-in AirPort Extreme Wi-Fi (based on IEEE 802.11n draft specification)2; built-in Bluetooth 2.1 + EDR (Enhanced Data Rate) module
Hardware accessories
60W MagSafe Power Adapter, AC wall plug, power cord
85W MagSafe Power Adapter, AC wall plug, power cord
Limited warranty
and service
Your MacBook Pro comes with 90 days of free telephone support and a one-year limited warranty. Purchase the AppleCare Protection Plan to extend your service and support to three years from your computer’s purchase date. Only the AppleCare Protection Plan provides you with direct telephone support from Apple technical experts and the assurance that repairs will be handled by Apple-authorized technicians using genuine Apple parts. For more information, visit Apple support or call 800-823-2775.
Apple and the global
environment
Learn more about Apple’s dedication to reducing the environmental impact of our products and processes. The Apple Product Environmental Specification details the environmental attributes of our products.
Recycling
Apple takes a holistic view of materials management and waste minimization. Learn more about how to recycle your Mac.

Yes, you can use the 85 watt adaptor. You cannot use the new adaptors because your computer is not equipped with the proper MagSafe connector. But you can use the older MBP adaptors as well as a 60 watt replacement adaptor. All can be found at Apple's Online Store.

HT201250 can I use the same drive to backup more than one computer

Can I use the same external hard drive to backup (using Time Machine) my Macbook pro and iMac computers?
Can they be the same partition?

etresoft wrote:
SMS5572 wrote:
It was never my intention to break protocol here.
Pondini is not accurately reporting the context of a private conversation.
I disagee (you called it threadjacking twice), but we can argue about that elsewhere.
As far as I know, only Lion Server and Time Capsule provide networked Time Machine services
It is supported.
From Lion (client) Help:
So many folks asked how to set it up that I wrote instructions on my web site -- Time Machine - Frequently Asked Question #22 -- no "unsupported" command needed.
Message was edited by: Pondini

Can I use the same material for C_BOWI_40

Hi All
A couple of years ago, I have attended SAP BOW310 and I have the course material for BOW310 as well, my questions is that do I need to obtain latest academy material again or I can use the same one. I can see the following details on my existing material...
BOW310
Web Intelligence Report Design I
SAP Business Objects - Business Intelligence
Participants Handbook
course Version 96
course duration 2 Days
Material Number 50103381
Owner: Ann Whitehead (I050533)
Now I want to give certification of C_BOWI_40 and I'm wondering that Can I use the same material or not....

Yes. If you use the iPad charger no problems.
If you use the iPhone charger, on iPad it will charge much slower, but it will still charge.

Can I use the same database for two WSUS servers?

Hi Folks,
Our HQ WSUS database is on a dedicated SQL Server 2008 in HQ. We are planning to set up a replica WSUS server in a branch office (centralized management mode). But we want to check the WSUS reports (e.g. computer/update status) only from the HQ instead
of each branch. I have two questions.
I should not install the SQL Server in Branch, and specify the HQ SQL Server as the Branch WSUS server database, right? In this case, I can check WSUS reports of both HQ and Branch from HQ, right?
Can I use a specific update source (e.g. Microsoft Update or other WSUS upsteam servers) for Branch WSUS server instead of HQ WSUS server even it's a replica WSUS server?
Thanks,
高麻雀

Regarding to "If the branch office server is intended to be a replica server, then it must be configured with the HQ WSUS server as the update source", does it mean my branch WSUS server is only able to get the patches from my HQ WSUS server?
That is the fundamental premise of a downstream replica server.
Isn't it able to get the patches from Microsoft Update or other WSUS servers?
Well, here we may have a terminology challenge... so let me take a step back and answer this way:
A WSUS server obtains *updates* via the process of synchronization. Updates can be synchronized from one of two sources: Microsoft, or an Upstream WSUS Server.
Additionally, updates have a concept of APPROVAL. Approvals can be obtained from an Upstream WSUS Server when the server is configured as a REPLICA server; otherwise, Approvals are created at each individual WSUS server.
Finally, updates have FILES. Files can be obtained from Microsoft or the Upstream WSUS server, and this configuration option is absolutely independent of where the updates and/or approvals come from.
Please note: All of this is exhaustively documented and discussed in the
WSUS Deployment Guide. I would highly recommend reading it cover-to-cover.
In this case, there will a a lot of bandwith cost on the leased line which is only 2Mbps and intended for critical business like VDI/ERP applications.
A few thoughts here...
First a 2Mb/sec link is more than adequate to support a WSUS server downloading update files from an Upstream WSUS Server.
Second, using BITS you can configure when those files are transferred as well as how much of that 2Mb/sec is made available to the WSUS downstream server.
Third... Patch Management IS a critical business function. Do not let it be treated as a step-child or the VDI/ERP functionally will be irrelevant.
"after installing the replica server in the branch office, on the upstream server enable the option for Reporting Rollup", will the report information (computer/update status) be recorded in the HQ SQL Server?
The detail reporting data for the clients of the downstream replica servers is physically stored in the upstream server's database.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Can we use the output of a report as in input for the other report?

Similar Messages

Maybe you are looking for