Can we use two costing variant for standard cost estimate

Hi,
Can we use two costing variant for standard cost estimate of two different materials in the same period ? e.g. Costing variant Z001 for Material code 1000 and Costing Variant Z002 for Material code 2000.
Here the system is not allowing to change the costing variant in Marking Allowance (t code CK24) for marking and release of Material cost 2000 if the standard cost for Material code 1000 is already marked and released.
Thanks,
Bijay

For a material in a period only one price can be released. Though you cn have two separate costing variants and then calculate standard estimate with that. U can release based on one variant only for a month. Or use MR21 and update the price as per the other variant
Thanks and Regards

Similar Messages

Can we use two costing variants for standards cost estimate release.

Hi,
We have 2 plants (plant 5100 and plant 5200) under company code 5000.
We have run standard cost estimate(CK11N) for material 98001000027 at plant 5100 using costing variant ZG01 and at plant 5200 using costing variant ZG02. First, we released standard cost estimate (CK24) for this materia at plant 5100 and set (in marking allowance) costing variant ZG01 and costing version 01. Next time when we are trying to release the standard cost estimate for the same material for plant 5200, it is automatically picking ZG01 as costing variant in marking allowance and it is not allowing to change the costing variant to ZG02 saying Company code 5000: Release already carried out, cancellation not possible, Message no. CK797.
Is it possible to use two different costing variants for release of standard cost estimate for a material at two different plants at the same company code? If so how?
Please suggest.
Thanks,
Bijay

Hi,
Thanks for your reply again.
What is the benefit of assigning "Single Valuation Variant same to different Plants" ? In costing variant also we can assign maximum only one valuation variant and this valuation variant will default for all the plants, and hence I dont think it is necessary to assign same valuation variant to different plants.
My issue is :
Example: ( Standard Cost Estimate for material 98001000027)
Plant - 1
Material Cost                                             Rs.100
Labour Cost                                               Rs.50
Overheads (10% of Labour Cost)                  Rs.5
(say ,through costing sheet - 1)
Total Standard Cost Estimate                      Rs.155
Plant - 2
Material Cost                                             Rs.150
Labour Cost                                               Rs.100
Overheads (20% of Labour Cost)                  Rs.20
(say, through costing sheet - 2)
Total Standard Cost Estimate                      Rs.270
Now, Please explain why we cannot have two Standard Cost Estimates for a material at two different plants? If it is possible to have two standard cost estimates for a material at two different plants, how to take care of overheads (rate of which varies) at two different plants (plant - 1 > 10% and plant- 2>20%) as we can assign maximum one costing sheet to a valuation variant variant?
How to map the system so as to meet the above requirement?
Thanks,
Bijay

Can i use two iphone user for a single apple ID to download apps from iTunes?

can i use two different iphone for a single apple ID to download apps from iTunes?

You can use as many iPhones as you want, there is no limit to the number of devices that can sync to an iTunes account.

Can we use two pricing procedure for same sales area

can we assign two pricing procedure to the same sales area
please suggest

hi all,
i am facing a strange problem
i m having some material which is under one division one distribution channel and one sale organization,and also the customer is same,but the customer some times taking the product for internal use of their company so they order it as general product and charging 4% tax on it
and some times they are asking product as spare and the spare is rate is hihg ,the tax is 12.5%then additional cess and exice duty is there
so the treat ment is totally different
can any body help me to solve this
shoud i make another division
should i make another distribution channel shoud i use another pricing procedure
should i use another order type to raise the order
please please solve the problem
now tell two pricing procedure will help or not???????????????
regards
subrat
[email protected]

HT204053 Can I use two Apple IDs for iCloud?

I have an Apple ID in both US and Germany. Can I use both IDs with iCloud?

You can use both accounts on your device for Mail, Contacts, Calendars and afew more iCloud services, but you can only set up one account for services like documents and app data, backup and also only one account for iTunes & Store purchases (automatic download option or iTunes Match)

How can I use two "Status profile" for two categories of users?

Hi friends,
I tried to configure two categories of users :
1 - First category (User1) can process the message and access to the standard Status profile (SLFC0001),
2 - The second category (User2) can process the message using another status profile (ZSLFC001).
To do this, i process like following :
1 - I created ZSLFN autorization key by copying of SLFN (Tcode :BS52).
2 - I created the Status Profile "ZSLFC001" by coping the SLFC0001(TCode : CRMBS02).
3 - I suppress some user status (ex : send to sap) and I replace SLFN autorization key by "ZSLFN"
4 - I created Transation type "ZLFN" assigned to ZSLFC001 status profile.
5 - I created a ZSAP_SUPPDESK_PROCESS rôle and I set the ZSLFN as authorization key in "B_USERST_T" and in "B_USERSTAT". This role is affected to the User2
Unfortunately, the User2 see and access to the "Send to SAP" user status. I think that the status profile ZSLFC001 is not used!!!
Tank you for your help,
Samad

Hello Xavier,
I changed the Process Type in DNO_CUST04, and I had a error message : "The system could not create the message because of an RFC connection "NONE " error Message was not created".
Furthermore, The change of process type will affect all users.
I think that there are two possibilities :
- Using process type (SLFN or ZLFN) according to the user processor,
- or using the same process type (SLFN) and according to the processor to load the appropriate "status profile".
Please find below more informations about the role:
- the Manually   Status Management: Set/Delete User Status                    B_USERSTAT
   Activity                  :    01, 06
   Authorization key   :    ZSLFN
   Object Category     :     *
   Status Profile         :    *
Thank you
Best regards
Samad

Can we use two Communication channels for one Interafce

Hi All,
Can we achive this in XI .
on basis of one value of field
If we get a value X=0 then use CC1
if we get a value X=1 then use CC2
for Single Interface.........
Regards

Hi Gangadhar,
i am working same scenario.
the scenarios is
Proxy->PI->JDBC
the condition is
IF Flag =0 it will sent to JDBC ,
IF Flag =1 it will sent to file and Mail
in mail it comes as a attachment.
I have achived this scenario using multi mapping in IR.
In ID i have used one bussiness system as Abap related and one is Bussiness Service.In that Bussiness system i have assign two Communiction Channesl.
In Reciever determination u have to select STANDARD and assing the recievers.
In interface dermination u have to select ENHANCED.
Please do these steps u r scenario will work fine.
Thanks
Ravi

Can I use two different greens for green screening and keep one without it being keyed out?

I am using a green screen which is your standard light green fabric.
I am also wearing a bottle green cape.
I want to key out the standard green which is no problem. However it also takes out the bottle green on my cape.
Is there a way on either Premiere Pro or After Effects to ensure the bottle green stays as it is without being automatically keyed out?
Many thanks.

shooternz wrote:
rotoscope
There's your answer, most likely. I can think of a few methods you might try, but they're going to be labor intensive, and likely involve some roto.
Most keyers have a threshold setting that determines what colors stay and which ones go. You could keep tweaking that setting in very small increments, and if you get lucky, it might discriminate between two green values.
You might be able to precomp in Ae and use the Change Color plug to shift one of them to a more contrasty green or different hue altogether and create a luma matte.
But, you failed green screen 101, and you gotta' go to detention.
robodog, you're being a bit harsh on Jimmy Simon. He said "Might be worth a reshoot...." I can't disagree. Depending on arahman's situation, a reshoot might be easier and quicker. You never know.

Can I use two Apple IDs for my purchases

Say spouses have separate AppleID's for purchases, can they both be used on a single user account Mac with iTunes?
Will iTunes handle two distinct accounts?
I assume it's not an issue for two iPhones as they're separate.
I guess the only other option would be one AppleID for Apps and purchases and separate AppleIDs for iCloud synching?
Again, wondering if a Mac or even an iPhone can accomodate purchases made under two separate AppleID's?

Apple IDs and iCloud - http://support.apple.com/kb/ht4895 - including multiple AppleIDs, and backup
iTunes: How to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - relocating iTunes' media folder to a shared area but leaving separate library files - extra tip at https://discussions.apple.com/message/17331189
Chris CA's instructions on sharing one iTunes music library between multiple user accounts - https://discussions.apple.com/message/8974074 - Multiple users using a single library file - similar post at: https://discussions.apple.com/thread/3753008
Suggestion by Turingtest for multiple users and one library - http://discussions.apple.com/message/9117622 - use smart playlists and tags to isolate groupings.
Discussions on using purchases from multiple AppleIDs in one iTunes library - https://discussions.apple.com/message/19543804
https://discussions.apple.com/message/24659889

Costing Variant for Actual

I require a clarification:
We define costing variant for standard cost estimation. We are in Process Order scenario. Likewise, should we have to use a costing variant for actual product estimation ? We want to have actual cost from the Product costing to the COPA from the cost component structure.

Hi
I think you are mixing up 2 things
1. One is costing variant for actual product cost estimate - As said by Declan you need to deifne this in OPL1 and assign it to your prod order type
2. Std cost estimate in COPA: For this you create a costing key and assign your costing variant (that you used for std cost estimate in CK11N/CK40N).... You assign this costing key to material types, etc and map your cost component structure to value fields.... With this, your std cost estinate gets trf to COPA during SD billing
Regards
Ajay M

Can I use two accounts in Game Center?

Can I use two different accounts for playing a game on same device?

If you are running iOS 7, read this.
https://support.backflipstudios.com/entries/22685780-iOS-7-and-You-A-How-to-Guid e-on-Updating-PLEASE-READ-
it is a good idea to post as much information as you can when you ask a question, many times, the iOS is relevant to what the answer will be.

Costing sheet and standard cost estimate

Hi
I am trying to use Costing sheet for overhead calculation .
But in costing run I am not getting the overhead amount calculated .
I created the costing sheet and assigned that to valuation variant .
Where from the actual / Plan values being picked up for over head calculation .
More over I need to understand on what basis the %age for overhead can be calculted to be aborbed to material cost .
In costing run I am having ZERO values for overhead .
I have followed the following steps
Costing Sheet: Components
Define Calculation Bases
Define Percentage Overhead Rates
Define Quantity-Based Overhead Rates
Define Credits
Define Overhead Keys
Define Overhead Groups
Even then the Production overhead is not being calculated at the time of Cost Run
for standard cost estimate .
regards

Do you enter overhead group in the material master.
Key that groups together materials to which the same overhead is applied.
Procedure
In costing with and without quantity structure, and when costing production orders and run schedule headers, you can apply percentage overhead charges by means of an overhead key if you:
Assign a costing sheet to your production order or run schedule header, or to the valuation variant for the cost estimate
Enter overhead charges in this costing sheet that use the overhead key field
Assign the overhead key to an overhead group
Enter this overhead group in the material master record of the material

HT204053 i RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

I RECENTLY PURCHASED ANOTHER IPHONE. MY INTERNET IS NOT WORKING. I JUST CREATED AN APPLE ID. WHAT'S NEXT? I NOW HAVE TWO DIFFERENT ACCOUNTS WITH DIFFERENT USER NAMES. HOW CAN I USE ONLY ONE ACCOUNT FOR ITUNES, ICLOUD APPLE ID ETC???

Welcome to the Apple community.
iTunes and iCloud and different accounts, you will need to delete both accounts from your device before adding the new details in their place.
For iCloud go to settings > iCloud, scroll down and hit the delete button. You can then sign back in using your correct details. For iTunes go to settings >store, tap your account ID and then sign out, you can then sign back in using your correct Apple ID.

HT204053 Can I use one Apple ID for two Apple IPhones?

Can I use one Apple ID for two Apple IPhones? I received an answer of yes.
Now another question. I have one ICloud Account, Two IPhones. Can I use Find my IPhone via the one ICloud Account? Can I see two IPhones on the map at the same time? or do I need to view the second phone via some other method.
Message was edited by: Hunter3D

Yes.
Cheers,
GB

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?

The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Can we use two costing variant for standard cost estimate

Similar Messages

Maybe you are looking for