Can we user custom subtype 9001 in 0105 to access ESS&MSS portal?

Hi,
I know by default the standard function modules of ESS will look for a user id in 0105 with subtype 0001. But 0001 has been used by some other portal pointing the same back end. we cannot use the same user id for ESS.
For ESS, can we use custom subtype for the user ids? Is there any configuration to handle this scenario? How do we link the new portal should validate the user ids in custom subtype.
Advance thanks for your valuable input.
cheers
Jayanthi

Of course you can have custom subtypes for 0105 but the issue in your case always in all programmes0105 0001 subtype
is checked so i would recommend not to substitute 0001 with 9001 instead use 9001 for some other purposes
it will be easier.

Similar Messages

Can we use custom subtype (9001) in 0105?

Hi,
Can we user custom subtype 9001 in 0105 to store the user ids for ESS&MSS?
I know by default the standard function modules of ESS will look for a user id in 0105 with subtype 0001. But 0001 has been used by some other portal pointing the same back end. we cannot use the same user id for ESS.
For ESS, can we use custom subtype for the user ids? Is there any configuration to handle this scenario? How do we link the new portal should validate the user ids in custom subtype.
Advance thanks for your valuable input.
cheers
Jayanthi

Hi Kirsten,
Thanks for your feedback.
Definitly I dont want to make changes to any of the standard programs. Changing the existing portal is also a major impact in the project.
Is there any configuration option available for ESS to point to the custom subtype 0105? We are in requirement gathering phase,the DEV environment is yet to be ready.
If you find any info, please let me know.
cheers
Jayanthi

Custom Subtypes for IT0021 not appearing in ESS

We are in ECC 6.0 and using custom subtypes like FM01 - FM06 for IT0021 (Family Member/Dependents). Now we are doing ESS implementation and we are not able to display Family details through ESS.
I have maintained the subtypes in table V_T7XSSPERSUBTY.
Our country grouping is 99 and for IT0021 we are using Russian Country screen and completed relevant configurations changes for the same.
Dear Friends, Can anyone guide me what extra changes I need to make for the Custom Subtypes (for IT0021) to appear in ESS.
Thanks in advance for your help.
Preethi

Hi again
One thought: There are 2 IMG nodes for Defining possible family members - in addition to V_T7XSSPERSUBTYP.
This is already maintained in our installation, as we are now doing an upgrade.
And all I did for upgrade, was entering data into V_T7XSSPERSUBTYP.
Check out if you need the entries in both the IMG nodes as well. It should not be necessary to code anything to get the subtypes in ESS.
Personnel Management>Personnel Administration>Personal Data>Family>Personal Data>Family Types>Define Possible Family Members.
Br
Kirsten

User does not exist while accessing ESS/MSS services

Hi Experts,
I have super admin rights, ESS & MSS roles assigned to me. The services under ESS/MSS are not working in development server & production server. It is working fine in Quality server.
earlier it was working fine in dev server.
Now when i am clicking on any of the services under ESS/MSS say for eg: ess-->leave request -->leave request(service)
i am getting the following error. I have posted this question earlier but not yet solved
Critical Error
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
User TESTUSER does not exist in this period
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User TESTUSER does not exist in this period
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:257)
at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:220)
at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:249)
at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:183)
at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:243)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:228)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:772)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:707)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1248)
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:723)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I have specific authorizations in the backend too
The overview page of both ESS & MSS are opening, area page is opening properly. this error is displaying only when i click on the services in the area page.
pls tell me how to access these services without this error???
Thanks in advance,
vv

Thanks to both of you for your quick replies.
The user ID in both the portal and backed are same and the same user is existing in the infotype 0105. with start date 1.11.2007 and end date as 31.12.9999
the user ID in portal created on 06.11.2007
when i checked the start date in the backend, it was not mentioned.
So i changed both the backend start date and infotype 0105 date to 09.04.2008 and end date as 31.12.2008.
still i am facing same problem. any help pls
regards,
vv

Integration of webdynpro abap custom iview into standard ESS/MSS portal

Hello all,
Could anybody please throw light on how to integrate custom iview which is developed in Webdynpro ABAP into standard tab in MSS (Webdynpro java)
For example.I want to add few custom fields(which are mapped to infotype 0041) into general information link of MSS.these fields will be created in webdynpro abap.
or.
I want to create a new link under general information which pops up as a custom iview (which is create in webdynpro abap) .
please let me know how can i meet the above requirements.
Thanks in advance.

I am not really sure about your requirement. With my limited understanding of that , i think that you have few possibilities.
1. You can let the ess/mss application communicate with WDA application via a Poral event.
2. You can enhance the ESS WDJ component and use RFC destination to get the data from info type and build your own view in WDJ.

User is getting critical error while accessing ESS

Hi Experts,
User is getting critical error message while accessing ESS tabs ( working time , career and job ...etc ).
User account in PORTAL as well as in the ECC Backend is fine.(105 infotype is maintained).
User has valid roles also.
Can anybody please help me in solving this issue.
Thanks
Thirun.
Edited by: Thirunv on Oct 26, 2009 2:16 PM

Hi,
1.Is this related to only one user or all the users?
2.Did you check the permissions on the system object used to access the ECC box.
Cheers!
Sandeep Tudumu

ESS/Mss user creation

Hello,
We are implementing ESS/MSS for our client.
Objects have been finished in Development and Quality.
Now we need to move things to production.
Now there is one doubt in my mind.
As per our client there will be around 100 SAP Users who will get SAP GUI installed on their machine.
But for ESS MSS all the employees of organization will be eligible.
Which will be around 500.
Now my doubt comes with Licensing issue.
How does SAP tackle such situation.
As a implementer of SAP do I have to bring some practice into consideration.
Does SAP charge for every licence they give to client at same cost !
All employees will not require SAP GUI on their machines. They will only access ESS/MSS.
We use same UME database for R/3 and Portal system.
Please clarify on my doubt.
Thank You

Thanks Siddharth..
As an implementer for ESS/MSS.... I have made separate roles in R/3.
For ESS:
Z_SAP_EMPLOYEE_ERP (Copy of Composite role....given by SAP for ESS)
For MSS:
A separate role in Portal.
And one role in R/3 with following authorization objects for ESS and MSS:
B_NOTIF    <OBJ> Follow-Up Functions for General Notifications
I_QMEL     <OBJ> PM/QM: Notification Types
PLOG       <OBJ> Personnel Planning
P_HAP_DOC <OBJ> Appraisal Systems: Appraisal
P_ORGIN    <OBJ> HR: Master Data
P_ORGINCON <OBJ> HR: Master Data with Context
P_PERNR    <OBJ> HR: Master Data - Personnel Number Check
S_BDS_DS   <OBJ> BC-SRV-KPR-BDS: Authorizations for Document Set
S_RFC      <OBJ> Authorization Check for RFC Access
S_SERVICE <OBJ> Check at Start of External Services
S_USER_GRP <OBJ> User Master Maintenance: User Groups
Now when Basis team will create a user for ESS.
They will give Z_SAP_EMPLOYEE_ERP role and Authorization role that we created....
other than this do I need to take care for anything else... in user creation process.....

C# Code that can add user directly to the AD through custom share Point form

Hi
Here is my requirement. Can anyone resolve???
Trying to build a Visual web Part in which system administrator can add user directly to the AD through custom share Point form.
Please help in doing this...

Hi
Use DirectoryEntries.Add Method
https://msdn.microsoft.com/en-us/library/system.directoryservices.directoryentries.add.aspx
Or
www.codeproject.com/Articles/18102/Howto-Almost-Everything-In-Active-Directory-via-C
Or.
www.morgantechspace.com/2013/10/create-new-active-directory-user-in-c.html?m=1
Regards, Rajendra Singh If a post answers your question, please click Mark As Answer on that ost and Vote as Helpful http://sharepointundefind.wordpress.com/

How to define default subtypes for Infotype 0105 on entry

Hello;
I have spend an entire day trying to look into PA configuration to determin how to make specific Subtype of the 0105 Communication Infotype automatically appear when an HR person is entering in a new employee.
Currently we have the 0001, 0010, and ADP subtypes automatically appear in the Communication Infotype screen when the person is entering in a new employee. I was asked to create three new Subtypes for Infortype 0105 and have these new subtypes automatically appear on the data entry screen for Infotype 0105.
I can not find anywhere in configuration how to do this. I ahve burnt an entire day searching configuration and have about had it with this garbage.
Can someone please point me to specific spot in configuration where these subtypes of and Infotype can be identified as default data entry screens.
I would greatly appreciate any help ... since I am not a HR Configurator ... just a plain old ABAP'er who has lost our configurators.
Scott.

Hi Scott,
To create subtypes follow:
Tcode: SPRO
Path: Personnel Management>Personnel Administration>Communication>Create Communication Types
Half the job is done. Then include those subtypes in your hiring action. To do so:
Tcode: SPRO
Path: Personnel Management>Personnel Administration>Customizing Procedures>Actions>Define infogroups>Info group
Select your hiring infogroup and create new entries with operation INS for 105 and the three subtypes.
You are all set!
Cheers,
Donnie

Infoset Query probelm for Custom Subtypes

Hi Experts.....
         I am new to Infoset Queries...
The problem is an Infoset query is generated for PA infotypes. It is generating output for all the infotypes except for Communication infotype which contains custom Subtypes. Could you plz help me how to get the data from these custom subtypes.(For these subtypes a select query is written).
Thanking you in advance.
Regards,
Sree

hi
        Thanks for the reply.......
   We had already created custom fields in the query..... The problem is for some fields it is getting the data. but the select query for all the fields is same(i.e., the where condition is based on pernr & usrty fileds in IT 0105).
   I can't understand why it is taking for some fields & why not for some....
Could you plz help me.
Regards,
Sree.

Users custom stamps dissapear in Acrobat 7.0 Professional

Hello,
For some reason our users custom stamps are dissapearing in Adobe Acrobat 7.0 Professional when they close Acrobat, reopen it, and attemp to use the stamp(s) they had previously created. I am not sure if we can upgrade Acrobat because the users documents have to comply with some patch standard at http://www.uspto.gov/. Where would I need to look in order to find out what version/patches http://www.uspto.gov/ supports so I can troubleshoot the problem more effectively?
Thank you.

Yes, but i was hoping to be able to convert multiple files through acrobat rather than plot one at a time through autocad. thanks.

Custom subtype not visible in ESS benefits

Hi Experts,
in erp2005, i created a custom subtype 9B for IT0021 (family members). defined a use case to maintain records through ESS personal information workset. so, a new button with name beneficiaries is seen on portal. however, these beneficiaries are not visible when employee wants to add them in the benefits plans as a beneficiary in certain plans. in the backend system, they are visible however. they can be added to a plan.
thanks for reading, i appreciate your help.

Kumarpal,
did you check this thread
https://forums.sdn.sap.com/click.jspa?searchID=17218337&messageID=6299502
Thanks
Bala Duvvuri

Can we call custom functions in view objects?

Can we call custom functions in view objects?these custom functions are from my backing bean...
Please help.....

User,
You can certainly add code to your view objects to do whatever you like.
However, it would be considered a very bad practice to call something in the backing bean from your view object. It violates the whole MVC design principle of ADF.
Perhaps if you can share your real use case, someone will give you ideas about the best way to do it, but I, for one, would advise you to forget about calling a backing bean function from your view object.
Best,
John

How to Deactivate Subtypes for INFOTYPE 0105.0021

Hi Seniors,
Can anybody tell me how to deactivate the assignment of subtypes assigned to infotypes.
I have 7 subtypes of Infotype 0105 and 5 for 0021 out of which 3 are not required by clients both in 0105 & 0021,now i have to remove the assignment made to the Infotypes but i am wondering about the customiizing steps and Tables to be maintained please help.
Waiting for some valuable responce.

Hi Woody,
Thank you very much for the update,it really worked but would like to ask you 1 more guideline to delaet the subtypes of 0041-date specifications.
There are certain specifications which are not available in 0041 but still poping up automatically ,
i have checked the settings in T548Y but no help it doesnt have the options but in maintaing 0041 the options coming up .
Can you guide me on this.
Thanks in advance.

Custom subtype in Infotype 0185

Hi Mentors
I have created a custom subtype in 0185 under maintain types of identification.
However when I try to access that in PA30, am getting an error ' no values found'
What am I missing ? Please guide
I need to have just two ids in IT0185 - have used the standard 02 for passport and have created one more TP for Travel passport ID.
I have also given infotype entry permissibility in T582L
Thanks

Hi Sikindar,
Am having the same problem still.
Can you please tell me the procedure to create a custom subtype
Thanks

Can we user custom subtype 9001 in 0105 to access ESS&MSS portal?

Similar Messages

Maybe you are looking for