Can Webcenter suite be installed on Windows 8?

Hi All
Wanted to check if anyone has tried installing webcenter on windows 8? Is it supported?
Thanks

Windows 8 is not listed on the oracle certification matrix, here is the link for your reference,
http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/index.html
so you might expect some unknown errors i hope,

Similar Messages

  • Can Oracle 8.1 install at window XP?

    dear all,
    i would like to know if the Oracle 8.1 for NT/2000 can be installed for window XP or not?
    thanks
    moises

    Yes! You can install Oracle 8.1 on WindowsXP. Then
    only problem I've found is that the OracleStart
    service give you an error during start up. This is
    not a problem, Oracle instance start up corectly even
    if there is this error.
    I still get the same behaviour running Oracle9i (9.2.0.1.0) on XP. But only when I attempt to start after not having stopped the db properly before (e.g. by simply restarting or shutting down the pc without caring about the Oracle services running in the background).

  • OVI suite cant install on Windows 7 x64

    When I try to install ovi suite 2.2.1.23 the attached errors appears on screen.  Can any help me to install it?
    Solved!
    Go to Solution.
    Attachments:
    ScreenHunter_01 Dec. 14 15.04.gif ‏21 KB

    Could you please try this?
    1. try running "sfc /scannow" from the command line.
    2. Run windows update
    3. Download Nos 2.2.1.23, or NOS 3beta and try
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Re: Portege M800 - can't get bluetooth installed in Windows 7

    Hi, I have a portege M800 PPM81C-07602D. It came with windows vista but I have reinstalled it to windows 7, and now I can't get the bluetooth drivers to install. I've tried the old vista drivers as well as the newer windows 7 drivers, but whenever I run the install I get the message "Please plug in the bluetooth device and click ok button."....If I click ok it just pops up again. I don't know why it wouldn't be finding the internal bluetooth....I dont think there's a physical on/off switch for the BT anywhere, and I looked to see if it had been disabled in the bios but there was nothing in there about it...so...I'm out of ideas.
    Anyone have any thoughts I can try?
    Any help is appreciated, thanks!

    Toshiba Bluetooth stack can be installed if the BT module is enabled properly so use FN+F8 key combination to enable BT module.
    After doing this BT should be recognized and installed properly (you will se BT entries in device manager).

  • Can LabView Japanese be installed on Windows XP MUI with Japanese as the default language?

    I recently set up a computer for a client in Japan using Windows XP PRO MUI version.  When they tried to install their Labview Japanese, it "turned into garbled characters."
    From the Microsoft link it appears there are some differences between a fully localized Japanese Windows and the MUI version"
    on localized versions:
    The user interface resources are fully localized.
    The
    Windows Setup information, such as system locale, user locale, keyboard
    layout, etc. is customized for the specific language/country. This is a
    policy setting with the Multilingual User Interface Pack.
    Additional country specific device drivers are added in the East Asian versions only.
    There
    is support for upgrades from localized versions of Windows 9X or
    Windows 2000 to localized Windows XP. MUI only supports upgrades from
    English versions.
    Because the resources used in a localized
    version are used to create MUI, there is no difference between the
    actual translations. This results in a nearly full localization, apart
    from small elements that are still dependent on:
    INF files.
    UI strings stored in the registry.
    etc.
    My question: Should it be possible to install Japanese Labview on top of Windows MUI with Japanese set as the user language and default language?  My assumption was Yes, but now they appear to be unable to get this to work.  Are there specific workarounds, policy changes, or drivers that can be done to get this to work?
    Thank you in advance for any help or insight you can provide, or if you can point me to a better place to post this (I don't know Japanese myself).

    Hi,
    Here you have some interesting tutos about foreign languages in LV :
    Localizing Your LabVIEW Application to Different Languages
    Localize LabVIEW Applications in Multiple Languages
    Let me know what happens.
    Regards,
    Message Edité par Steve Mohamed le 02-27-2009 09:02 AM
    Steve M.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

  • What versions of Oracle Application Server suite to install on Windows 2008

    Hello everyone!
    Now I want to install Oracle Application Server on Windows Server 2008.
    I downloaded 10.1.3.1.0 SOA suite, and also downloaded the patchset for 10.1.3.4, I'm working on windows server 2008,its version is 6.0. and 11g database release(11.1.0.6.0)(installed).
    But when I try to install SOA suite, it give me error on 1st screen of universal installer as “checking operating system version: must be 5.0,5.1 or 5.2. actual 6.0 failed<<<< Press enter to exit”.
    And when I try to install patchset for 10.1.3.4. It does not show any version problem,but it give me a Error message “There are no patches that need to be applied from the patchset oracle app server patchset 10.1.3.4.0 “,after screen “Specify file locations”.
    Please tell me how to install successfully what kind of Oracle AS on Windows Server 2008!
    Thanks so much!

    Please see the following note on Metalink for most updated Certification Matrix for the OS, your machine and Oracle AS products.
    Note Id: 742649.1
    If you are using an AMD 64bit machine, then paritcularly check line 88. If you have an intel, see particularly 125 and 126 to see the relevant patches to be applied before installation of your type of AS software.
    hope that helps!
    AMN

  • Can applications run or install in Windows PE?

    I'm trying to create a Windows 8.1 image for a tablet.  To make the image work for multiple computer models, I tried adding a WMIC query to filter the drivers by model.   However, it fails and crashes to the red screen when I try to use it.  It
    appears that WMI queries do not work on this system unless you install the "WMI Provider" application.  This is an EXE installer.  I tried importing the driver files in the application folders, but it still failed to work.
    The deployment guide for the tablet says: 
    "If BIOS access via WMI is needed when in a WinPE environment, the HP ElitePad 1000 WMI Provider needs to be installed or
    added to the boot image prior to any WMI access. See the HP ElitePad 1000 WMI Provider documentation for details on
    setup and usage."
    However the "documentation" is not helpful.  It basically is only a readme text file that says click on the setup file and follow the prompts.
    Can exe based applications be installed in a WinPE 5.0 environment?
    Is there another way to do this so I don't have to have a separate task sequence for each model of computer using this Windows 8.1 image?

    I need to correct a few assumptions listed above.
    1. Drivers that are installed *only* via a *.exe wrapper program won't work with the built-in MDT driver framework. If they are non-critical drivers, you can install them during the State Restore phase of MDT. If they *Are* boot critical, you will need to
    extract them out.
    http://keithga.wordpress.com/2013/12/09/mdtosd-driver-management-overview/
    2. the WMI provider *IS* available for MDT LitetouchPE_???.wim images, so I don't understand your comment above that WMI is not. Unless you are talking about a specific WMI provider add-on for the ElitePad 1000, which I doubt.
    3.  Additionally, you can't install drivers for the full OS from Within the WinPE phase, that would install the drivers into WinPE, not the full OS.
    4. Listen to Johan.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • HT1926 How can I download and install for Windows 2000?

    How can I install iTunes for Windows 2000?

    Even if you would manage to find one of the ancient versions of iTunes, like from here: http://www.oldapps.com/itunes.php,
    it will be very likely not to work on Windows 2000 and also not being accepted by Apple's servers.

  • Oracle E-Business Suite R12 Install on Windows 2003 - FRM-92101

    I have completed the install and can log into the application, however, when I try to access a forms I get an error FRM-92101.
    FRM-92101: There was a failure in the Forms Server during startup.
    This could happen due to invalid configuration.
    Please look into the web-server log file for details.
    The symptoms see to be the same as in Metalink2 Doc ID Link: [429627.1|https://metalink2.oracle.com/metalink/plsql/f?p=130:14:1491198142809682374::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,429627.1,1,1,1,helvetica]
    That Doc ID suggests running "make -f ins_forms.mk install", however, I am unable to get this to work. Is anyone able to help.

    The error you get online is
    FRM-92101: There was a failure in the Forms Server during startup.
    This could happen due to invalid configuration.
    Please look into the web-server log file for details.
    The file $INST_TOP/logs/ora/10.1.3/j2ee/forms/forms_default_group_1/application.log contains
    09/01/10 17:19:01.812 10.1.3.0.0 Started
    09/01/10 17:19:43.453 formsweb: FormsServlet init():
    configFileName: e:\oracle\VIS\inst\apps\VIS_succeed-ebs12\ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    09/01/10 17:19:43.515 formsweb: 10.1.3.0.0 Started
    09/01/10 17:21:15.46 formsweb: 10.1.3.0.0 Stopped
    09/01/10 17:21:38.484 10.1.3.0.0 Started
    09/01/10 17:21:40.515 formsweb: FormsServlet init():
    configFileName: e:\oracle\VIS\inst\apps\VIS_succeed-ebs12\ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    09/01/10 17:21:40.515 formsweb: 10.1.3.0.0 Started
    09/01/10 17:41:17.140 formsweb: 10.1.3.0.0 Stopped
    09/01/10 17:48:33.484 10.1.3.0.0 Started
    09/01/10 17:48:36.171 formsweb: FormsServlet init():
    configFileName: e:\oracle\VIS\inst\apps\VIS_succeed-ebs12\ora/10.1.2/forms/server/appsweb.cfg
    testMode: false
    09/01/10 17:48:36.187 formsweb: 10.1.3.0.0 Started
    09/01/10 17:59:34.484 formsweb: ListenerServlet init()
    09/01/10 18:03:09.984 formsweb: Forms session <1> failed during startup: no response from runtime process
    09/01/10 18:03:09.984 formsweb: Forms session <1> exception stack trace:
    oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
    at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
    at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
    at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:595)
    09/01/12 11:33:51.531 formsweb: 10.1.3.0.0 Stopped
    The file $INST_TOP/logs/ora/10.1.3/Apache/?????? contains
    [Sat Jan 10 17:18:42 2009] [error] Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting
    [Sat Jan 10 17:22:52 2009] [error] [client 192.168.1.40] [ecid: 1231608172:192.168.1.40:1264:3120:4,0] File does not exist: e:/oracle/vis/inst/apps/vis_succeed-ebs12/portal/oa_html/jtfTestCookie.jsp
    [Sat Jan 10 17:23:07 2009] [error] [client 192.168.1.40] [ecid: 1231608187:192.168.1.40:1264:1980:1,0] File does not exist: e:/oracle/vis/inst/apps/vis_succeed-ebs12/portal/oa_html/jtfTestCookie.jsp
    [Sat Jan 10 17:41:00 2009] [error] Server ran out of threads to serve requests. Consider raising the ThreadsPerChild setting
    [Sat Jan 10 17:54:47 2009] [error] [client 192.168.1.40] [ecid: 1231610087:192.168.1.40:3956:2720:2,0] File does not exist: e:/oracle/vis/inst/apps/vis_succeed-ebs12/portal/favicon.ico
    [Sat Jan 10 17:59:33 2009] [error] [client 192.168.1.40] [ecid: 1231610373:192.168.1.40:3956:2848:10,0] Directory index forbidden by rule: e:/oracle/vis/apps/apps_st/comn/java/classes/
    [Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:17,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_GB.class
    [Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:18,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_GB.properties
    [Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:19,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_en_GB.class
    [Sat Jan 10 18:03:10 2009] [error] [client 192.168.1.40] [ecid: 1231610590:192.168.1.40:3956:2848:20,0] File does not exist: e:/oracle/vis/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_en_GB.properties

  • Can Visual Studio 2013 installed on Windows 7 cause Bug check in NTFS driver?

    Hello!
    I installed Visual Studio 2013 on Windows 7. Shortly after that Bug check of NTFS started periodically happen.
    Does VS install any drivers and therefore may be the cause of the bug check?
    Thank you

    Hi,
    Visual Studio 2013's target platform include Windows 7 Service Pack 1, Windows 8, Windows 8.1, Windows Server 2008 R2 SP1, Windows Server 2012, Windows Server 2012 R2.
    For more information, please view this article:
    Visual Studio 2013 Compatibility
    http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
    For further help, I would like to suggest you ask MSDN Visual Studio Forum:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=vssetup&filter=alltypes&sort=lastpostdesc
    Note: add your exact error message or symptoms.
    Karen Hu
    TechNet Community Support

  • WebCenter Suite comsume and publish the JD Edwards reports portlets

    Hi All,
    I am exploring the option of using webcenter 11 as portal with JDE 9.0 and looking for possibility of use/publish the JDE native reports via webcenter as portlet.
    Can Webcenter suite (latest release) consume and publish the JD Edwards (9.0) reports portlets?? If so, can you please provide me the details.
    Thanks in Advance,

    Direct questions for Webcenter framework 11g here:
    WebCenter Portal

  • I have creative suite 5.5 for windows, i have just brought a mac, how can i install creative suite?

    i have creative suite 5.5 for windows, i have just brought a mac, how can i install creative suite?

    brook55 wrote:
    i have creative suite 5.5 for windows, i have just brought a mac, how can i install creative suite?
    You cannot install CS5.5 Windows onto your Mac.
    You must either purchase a new copy of CS6 for your Mac or join the Creative Cloud (and pay the monthly fee).
    If you join the Cloud you can then install CS6 (and soon version CC) on both your Mac and Windows for the same membership fee.

  • Unable to install Adobe elearning suite 1.0 in windows 7 pro environment

    I have spent two days trying to re-install my elearning suite 1.0 on a new computer.  I have called Adobe support three times.  The first time I got cut off after 25 minutes on line.  The second time I got cut off after 40 minutes on line.  On the third try, after over an HOUR on hold, I made it to a person and I told her my problem.  She was quiet for a second or two and then I heard the dial tone.  If anyone from Adobe support is lurking on this forum, shame on you.
    I purchased the very expensive Adobe ELearning Suite 1.0 less than a year ago and installed in on my Windows XP Thinkpad machine.  It was a painful install.  I use Adobe Presenter 7 and Adobe Acrobat Pro.  Thats it.  Nothing else.   
    Unfortunately, my Thinkpad died and I have purchasaed a new Thinkpad -- a W510 Windows 7 Pro and 4 g ram.  Should not be an issue.
    It will not even get past the starting gate.  I get an auto lang error and then conversion data file.
    When I the error I see a similar error for a different product, however the error is for a language mismatch between the operationg system and adobe.  This is not my problem.  I have verified that both products are same language -- jeeze, English.
    At this point the only option I can see if to purchase the very expensive Adobe elearning suite 2 -- but guess what?  It too comes with Adobe Presenter 7.  Why should I have to pay another 1000 for the same thing I already own.
    Has anyone else had this issue who might be able to provide advice?  At this point I am so frustrated and irritated by Adobe I could scream.
    I would also be very receptive of recommendations for a replacement for Presenter --
    Very kind regards,
    Stephanie D

    I emailed the files on Tuesday evening.  Here the files are again. 
    My new computer does not have a pdapp.log or a amt.log file. 
    Kind regards,
    Stephanie Drilling, CMA PMP
    Professional Business Solutions, Inc.
    1001 Boardwalk Springs Place, Suite 111
    O’Fallon, Missouri  USA  63368
    t.  (314) 283-1832  f. (636) 561-0859
    Tollfree Number (866) 965-9222 Ext 314
    Website  www.epbsi.com <mip://05621088/www.epbsi.com>
    Description: Description: Description: logo
    FRESH SOLUTIONS FOR YOUR BUSINESS
    CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
    From: Stephanie Drilling [email protected]
    Sent: Tuesday, November 09, 2010 10:08 PM
    To: 'Manish Anand'
    Cc: 'Suresh Jayaraman'; 'Shivaswamy Viswanath'
    Subject: RE: Unable to install Adobe elearning suite 1.0 in windows 7 pro environment
    Thank you for taking the time to respond to my forum entry.
    I have searched my computer directories and can provide the attached files. 
    My new computer does not have a pdapp.log or a amt.log file. 
    Kind regards,
    Stephanie Drilling, CMA PMP
    Professional Business Solutions, Inc.
    1001 Boardwalk Springs Place, Suite 111
    O’Fallon, Missouri  USA  63368
    t.  (314) 283-1832  f. (636) 561-0859
    Tollfree Number (866) 965-9222 Ext 314
    Website  www.epbsi.com <mip://05621088/www.epbsi.com>
    Description: Description: Description: Description: logo
    FRESH SOLUTIONS FOR YOUR BUSINESS
    CONFIDENTIALITY NOTICE: This communication with its contents may contain confidential and/or legally privileged information. It is solely for the use of the intended recipient(s). Unauthorized interception, review, use or disclosure is prohibited and may violate applicable laws including the Electronic Communications Privacy Act. If you are not the intended recipient, please contact the sender and destroy all copies of the communication.
    From: Manish Anand [email protected]
    Sent: Tuesday, November 09, 2010 7:20 AM
    To: [email protected]
    Cc: Suresh Jayaraman; Shivaswamy Viswanath
    Subject: FW: Unable to install Adobe elearning suite 1.0 in windows 7 pro environment
    Hi Stephanie,
    It is really unfortunate that you are not able to install our product. We will try our best to resolve your issue.
    In order to probe into your issue, we would want you to provide us with some files. Please get us the following files:
    1.       oobelib.log          from      MM-DD-YYYY.log.gz
    Regards,
    Manish Anand
    Quality Engineer
    Adobe Captivate Team

  • I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    I need help with deactivation.
    I want to do a clean install of Windows 7 Pro on my computer and my installation of Adobe Design Premium CS3 is not functioning. I cannot start it to get in and deactivate the Creative Suite installation.

    if you're using the same computer hardware to reinstall your cs3, you don't need to deactivate first.
    but if there's a significant hardware change you can ask adobe support for an activation count reset. contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • Error installing E-Bussiness Suite (EBS) R12 on Windows 2003 Server x32

    I am trying to install EBS R12 and i am getting error at stage 3 of 5 on 53%
    I followed steps from below link
    http://supportuae.wordpress.com/2013/01/26/installing-oracle-e-business-suite-r12-on-microsoft-windows-server-2003/
    My Setup
    Win 2003 Server SP2 x32 *(Installed in D:\) 20 GB*
    MS Visual C++ Express edition *(D:\MSVS)*
    Cygwin 1.7 *(D:\cygwin)*
    Acive Perl
    Oracle Apps Dump at G:\
    Installing Oracle Apps at E:\ with 270 GB NTFS
    Installed in Administrator Login
    Below is my Error log
    ~~~~~~~~~~~~~
    Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    Processing Step 3 of 5
    Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=03:12 PM )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
    STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 03:12 PM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "FALSE" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_1"
    "runProcess_1"
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the install for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Installing Applications Technology Stack
    Statusstring Installing Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx600M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -d G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\driver\appsts\driver\gias.drv -pwd no_password_here -log E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\log\ApplyAppsTechStack.log -nthreads 4 -verbose
    Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
    Checking Disk contents in - G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz
    Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
    Checking Disk contents in - G:\Oracle_Apps\StagesR12\oraAS\Disk1
    Unzip Count:60
    Processing Disk1....
    Processing Disk2....
    Processing Disk3....
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 0 == 0 goto :BITS_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "runProcess_2"
    "runProcess_2"
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Perform the registration for tech stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
    Statusstring Registering Applications Technology Stack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml -stage G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
    Log file located at E:\oracle\VIS\inst\apps\VIS_ebs\admin\log\ApplyAppsTechStack_04211520.log
    | 0% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed
    | 3% completed
    / 3% completed
    - 3% completed
    \ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
    Processing DriverFile = G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    Running Instantiation Drivers for G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adriapps.drv
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunias.cmd
    instantiate file:
    source : G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
    dest : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd
    backup : E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_ebs\out\templbac\adrunat.cmd
    Step 0 of 5
    Command: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    Processing Step 3 of 5
    Executing: E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM ###############################################################
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>REM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set date=Sun 04/21/2013 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>(set time=04:30 PM )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
    STARTED INSTALL PHASE : APPS TECH STACK : Sun 04/21/2013 04:30 PM
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\java;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET XML_FILE=E:\oracle\VIS\inst\apps\VIS_ebs\appl\admin\VIS_ebs.xml
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET PATH=G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz\unzip\NT;D:\Perl\site\bin;D:\Perl\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\MSVS\VC\bin;D:\cygwin\bin
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>setlocal enableextensions
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set /P unpw=""
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=4 )
    G:\Oracle_Apps\StagesR12\startCD\Disk1\rapidwiz>CD /D D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
    D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" == "E:\oracle\VIS\inst\apps\VIS_ebs\temp\adrunias.cmd" (if not ""runProcess_2"" == "FALSE" (goto :"runProcess_2" ) else (goto :runProcess_1 ) )
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running APPL_TOP Install Driver for VIS instance
    Please refer to the remaining logs on applications node at - E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log

    which version of Oracle R12 ?
    these are generic errors, please check log file for details and post here error log
    and also ensure that you are following proper guidelines mentioned in MOS note:
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
    i am using Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
    i have already posted complete log from E:\oracle\VIS\inst\apps\VIS_ebs\logs\04211310.log
    Can you post link to guidelines mentioned in MOS note:
    Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]

Maybe you are looking for

  • ThunderBolt to HDMI with a DVI to HDMI (MacPro OS 10.9.1)

    Hello, I'm a college student and have an old ViewSonic monitor that was given to me. So I went out and got a DVI to HDMi adapter so that I can play around with a Raspberry PI.I also thought that this would allow me to plug my Thunderbolt to HDMI adap

  • New firmware for Nokia E65?

    Hi! I've heard many who have updated their Nokia E65 to firmware v3.0633.69.00 but my updater still says v2.0633.65.01 . Where do I get the v3? And my E65 is very very very slow to open menus and messages. Anyone else got this problem? How can I fix

  • XMB2DB_XML queries with join

    Using XMB2DB_XML I have done some simple queries like select, insert, update in SAP XI 2.0. Now i want to do the queries involving joins... Any idea about the XML Document Format for the Mode XMB2DB_XML??? Abhijeet [email protected]

  • BAdI for replacing CRM Pricing

    Hi Experts, I have a requirement to make a RFC call to retrieve the pricing from ECC/Vistex in CRMD_ORDER transaction after hit enter key with product/qty entry. I'm searching a BAdI for CRMD_ORDER (so many BAdIs for this TC) that can RFC by customer

  • Field for drag down option

    Hi, i have one requirement, i would like to create one ztable,i want display one field for  drag down option, could u please sugest me how to create particular field for drag down option. Regards, koti. Moderator Message: Do not ask vague questions.