Can WebObjects 5.2 or 5.2.4 installing on Windows Server 2003 ?

Regarding to the topic above, i tried to install completely, even tried also update to version 5.2.4, but i found that one of the services still fail in loading, open.exe
The error msg pop-out: " invoker error", and the log stated that openexec is hung in starting. Meanwhile, my suspicion on this happen might be that "open.exe" is NOT support on 64-bit of the Windows OS, which is Windows Server 2003 instead of Windows 2000, which only 32-bit.
So, any idea or solution to solve this matter?
Hope can get your suggestion soonest !!!
Thanks !!!

I don't think that it is related to the windows server 2003 R2 because it is supported if it is a standard edition.
installation guide for ACS 4.2: http://tiny.cc/xm3ekw
What is not supported is windows 2003 x64.
It is either you don't have R2 standard edition or the problem is something else. IMHO I think that ACS will be able to be instealled correclty with R2 enterprise edition as well.
Rating useful replies is more useful than saying "Thank you"

Similar Messages

  • Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

    I read the thread Widows 7 printer
    HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
    as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg). 
    Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
    of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
    XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
    Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
    Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
    NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
    attempted to install the driver, I got the same message stating:
    "The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
    Why aren't there x64 drivers?
    During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
    Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
    Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
    Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
    I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
    Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
    thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
    Andrew*
    P.S. I was advised to come for help here from
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • Can office 2013 home and business be installed in windows server?

    Can office 2013 home and business be installed in windows server?

    Hi,
    Which is the operating system version of your windows server? According to the requirements in the link below, it seems that it can be install on Windows server 2008 R2 and Windows Server 2012.
    In addition, please view the detailed requirements to see if your system is supported.
    http://www.microsoftstore.com/store/msusa/en_US/pdp/Office-Home-and-Business-2013/productID.259321600
    Best regards,
    Susie

  • Can't uninstall or reinstall oracle 10g express edition in w/server 2003

    Hi,
    I need help from all of you, i already install oracle 10g express edition in
    windows server 2003 in D drive. but i can't remove because the oracle not in
    the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the
    database but can't go to the database home page.The error message (the install
    cannot proceed as service OracleServiceXE is present on the system. Remove the
    service , reboot the systemand retry the installation) can any one guide me to use
    command prompt to remove.
    My email address [email protected]
    Thanks

    Hi,
    Perform the following steps, this will solve your problem and can go with new installation. :-)
    (Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
    Manually Removing Oracle Database XE
    If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
    Step 1: Stop the Oracle Database XE Services
    Step 2: Remove the Oracle Database XE Registry Editor Settings
    Step 3: Update the System Variable Path
    Step 4: Remove Oracle Database XE from the Start Menu and Desktop
    Step 5: Remove the Oracle Database XE Directories
    Step 6: Install and Run the Windows Installer CleanUp Utility
    7.2.1 Step 1: Stop the Oracle Database XE Services
    Follow these steps:
    1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
    2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
    OracleXE
    OracleXETNSListener
    OracleJobSchedulerXE
    OracleXEClrAgent
    OracleMTSRecoveryService
    3.
    Exit Services.
    See also the Microsoft online help for more information on stopping services.
    7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
    Follow these steps:
    1.
    Log on to Windows with Windows administrative privileges.
    2.
    Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
    3.
    Start the Registry Editor at a command prompt:
    SYSTEM_DRIVE:\> regedit
    4.
    Go to HKEY_CLASSES_ROOT.
    5.
    Delete the following keys:
    NEED TO CONFIRM THE XE-SPECIFIC ONES.
    6.
    Go to HKEY_CURRENT_USER\Software.
    7.
    Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
    8.
    Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
    9.
    Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
    10.
    Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
    11.
    Expand the ODBCINST.INI key and remove the Oracle in XE key.
    12.
    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
    13.
    Delete the following keys:
    OracleServiceXE
    OracleXEClrAgent
    OracleXETNSListener
    14.
    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
    15.
    Delete the Oracle.xe key.
    16.
    Exit the Registry Editor.
    17.
    Restart your computer.
    Thanks,
    Rams...
    Edited by: user10888288 on May 3, 2010 5:58 AM

  • Can't uninstall or reinstall oracle 10g express edition in windows server 2

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

  • I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. Tried to follow some suggestions found here but nothing is working. Any new suggestions?

    I can't get new version of itunes to install on Windows 7 64 bit computer. Receive message that reads insufficient privileges to access c:\program files\ipod\bin. I've followed several threads I've read here but nothing is working.

    For such situation, I'd suggest the following:
    1. Remove current installed office with the fix-it tool in
    KB2739501, and follow the "Remove Office manually" section to make sure there are no remaining files
    2. Either download a trial version of Office 2013 from
    http://office.microsoft.com/, or from
    http://technet.microsoft.com/en-us/evalcenter/jj937170
    3. Reboot your computer in clean boot mode, and run setup again
    Max Meng
    TechNet Community Support

  • At UC platform i can see some applications are installed on Windows server and some directly to VMWare. Pls explain?

    At UC platform i can see some applications are installed on Windows server and some directly to VMWare. Pls explain?

    Pretty much all newer versions of UC applications have started supporting virtualization so they can be installed on the VMware. 
    Have a look at dockwiki for virtualization supported apps:
    http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Supported_Applications
    Some applications like CUCM version 4 were windows based previously but going ahead with version 5, 6 onwards the OS has been changed to Linux Operating system.
    Let me know if you need any more information.
    -Terry

  • Help:where can i download jdk1.4 amd64-bit for windows server 2003 version?

    where can i download jdk1.4 amd64-bit for windows server 2003 version?

    Thanks all for your replys.
    As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
    Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
    ' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
    When will be 64 bit runtimes for CR 08 will be available?
    Thanks

  • I can not get iTunes or Quick Time to install on Windows xp machine.  I get

    I can not get iTunes or Quick Time to install on Windows xp machine. I get an error 1316 - c:\wndows\installer\iTunes.msi
    and then I get an error -1603 ?
    any ideas, oh I am trying to put iTunes & QuickTime on a Different Hard Drive Partion 'D:' not on the,
    Normal 'C:' Drive Partion... Any Help You can give me.
    My Email address is: [email protected]
    Thank You in advance! Al Adams
    SONY VAIO Windows XP

    I strongly recommend that you install iTunes to the default C: paths. You can change the perferences to keep the actual music files on your D: partition.
    Here is a place to start with the installer errors:
    InstallShield Consumer Central FAQs

  • Can't get past OCX error when installing ODAC 11g on Windows Server 2003

    I have been trying to install ODAC 11g on Windows Server 2003 and can't get past the OCX error when registering oravsdbgeng11w.dll. I've read every message on this forum even remotely related to this problem and tried every solution offered. I have done a clean install into a new Oracle home, and made sure Instant Client is always included. All service packs and automatic updates have been installed. For what it's worth I have successfully installed ODAC 11g on Windows XP Pro.
    If anyone out there has been able to get this up and running and would care to share the wisdom that would be greatly appreciated.
    Thanks!
    Michael Young
    Latitude Geographics
    Victoria, BC

    Michael, as you already noticed, every time I have seen this issue it has been because ODT was being installed into an Oracle home where no client exists, or perhaps installed into an old oracle home where the client was an old version (eg Oracle10), or the client was broken. Usually though, the user unchecked the instant client checkbox during the ODAC install.
    So you say you checked instant client and you still got the error? That doesn't add up...
    Are you using 32-bit windows? If you are using 64 bit windows be sure to tell us.
    Why don't you try avoiding using instant client at all, in case it is somehow not getting installed properly.
    You can do this as follows:
    1) Under the download links on OTN, go to the database download page.
    2) Download the Oracle Database client 11g for Microsoft Windows
    3) Run this installer and Install ODP.NET 1.x and 2.x into a new Oracle home from this client install, but nothing else. If ODP.NET is not listed there (it has been a long time since I looked at that) than just install a minimal Oracle client install.
    4) Close the installer
    5) Go back and install ODAC and this time choose "Oracle Server" radio button during the install (rather than the client install)
    6) Install ODT and ODP.NET at least and be sure they are being installed into the Oracle home created in the first steps above.
    This will avoid use of Instant Client and will hopefully avoid the OCX error. Let me know if this solves your problem.
    Christian

  • Why the RSC can not found my JRE1.6.0.06 on windows server 2003 ?

    I installed the SUN RSC program on my windows server 2003, It required JRE 1,3 or later,then I installed the JRE.16.0.06, I set the JAVA_HOME and CLASSPATH,I can got correct information with java -version commend on cmd,but the RSC still told me that it required JRE 1.3 or later.
    Why ?

    We run our Sun V480s and E250 (Solaris 10) headless, and depend on RSC (both CLI and GUI) to access the consoles from Windows.XP desktop machines.
    We have been using the RSC GUI from the Wintel boxes quite successfully for several years, and appreciate having the RSC devices in our Sun servers. We rely on Sun's RSC software.
    Several days ago we installed the current Sun JRE (1.6.0.06) on the Windows machines. RSC GUI now fails to run on the Windows machines, displaying a message box advising that Java 1.3, or later, is required and directing us to download 1.3 or later.
    Since 1.6 is later than 1.3, it would appear that Sun's current JRE broke the existing Sun RSC GUI app.
    How could Sun do this? WIll they release a fix?
    We will try to open a Service Request, but are having difficulty due to Sun's problems implementing the new Support Contract arrangements, and it is not clear that we can access our support at this time. Sun has physically visited our facility, and given us absolute assurance that they will continue our existing contract for the duration of their difficulties, while simultaneously lapsing our contract when we attempt to access it online. Consequently, we cannot immediately get contractual assistance on this matter, through the normal support channel.
    Thank you.
    DG
    Edited by: david_grove on Jun 4, 2008 5:53 PM

  • One of the DC can't connect to AD for Windows server 2003

    Dear Sir,
    We have 2 Domain Controllers in our Domain, DC1 and DC3, which is running on Windows Server 2003 SP2, I found the DC3 failed to connect to AD, and I found the following error message logged in the system event many time
    Source: MRxSmb
    Type : Error
    主瀏覽器從電腦 DC1 收到 認為它是傳輸 NetBT_Tcpip_{C1D9AA59-2423-4059-A773 網域主瀏覽器的伺服器宣告。 主瀏覽器已中止或已強制選擇。
    Source: KDC
    Type: warning
    找不到事件識別碼 20 (在來源 KDC 中) 的描述。本機電腦可能沒有所需的登錄資訊或訊息 DLL 檔案，因此無法顯示發自遠端電腦的訊息。您可以使用 /AUXSOURCE= flag 來重新抓取這個描述。請參閱 [說明及支援] 來了解詳細資料。以下資訊為事件的一部份: 事件日誌檔已損毀。
    Source: Kerberos
    Type: Error
    The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.  This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically
    named  machine accounts in the target realm (Domain name), and the client realm.   Please contact your system administrator.
    I have searched on internet, and tried some of the suggestions but still can't fixed the issue, I also can't depromo the DC3, and can't use remote desktop connection connect to DC3
    What can I do now, can I just reinstall the DC3 and process the dcpromo again?

    Hi Calin,
    Here is the log content for your reference:-
    Domain Controller Diagnosis
    Performing initial setup:
       * Verifying that the local machine DC3, is a DC.
       * Connecting to directory service on server DC3.
       * Collecting site info.
       * Identifying all servers.
       * Identifying all NC cross-refs.
       * Found 2 DC(s). Testing 1 of them.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\DC3
          Starting test: Connectivity
             * Active Directory LDAP Services Check
             * Active Directory RPC Services Check
             ......................... DC3 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\DC3
          Starting test: Replications
             * Replications Check
             [Replications Check,DC3] Inbound replication is disabled.
             To correct, run "repadmin /options DC3 -DISABLE_INBOUND_REPL"
             [Replications Check,DC3] Outbound replication is disabled.
             To correct, run "repadmin /options DC3 -DISABLE_OUTBOUND_REPL"
             ......................... DC3 failed test Replications
          Test omitted by user request: Topology
          Test omitted by user request: CutoffServers
          Starting test: NCSecDesc
             * Security Permissions check for all NC's on DC DC3.
             * Security Permissions Check for
               DC=ForestDnsZones,DC=domain,DC=COM,DC=HK
                (NDNC,Version 2)
             * Security Permissions Check for
               DC=DomainDnsZones,DC=domain,DC=COM,DC=HK
                (NDNC,Version 2)
             * Security Permissions Check for
               CN=Schema,CN=Configuration,DC=domain,DC=COM,DC=HK
                (Schema,Version 2)
             * Security Permissions Check for
               CN=Configuration,DC=domain,DC=COM,DC=HK
                (Configuration,Version 2)
             * Security Permissions Check for
               DC=domain,DC=COM,DC=HK
                (Domain,Version 2)
             ......................... DC3 passed test NCSecDesc
          Starting test: NetLogons
             * Network Logons Privileges Check
             Verified share
    \\DC3\netlogon
             Verified share
    \\DC3\sysvol
             ......................... DC3 passed test NetLogons
          Starting test: Advertising
             Warning: DsGetDcName returned information for
    \\dc1.domain.COM.HK, when we were trying to reach DC3.
             Server is not responding or is not considered suitable.
             The DC DC3 is advertising itself as a DC and having a DS.
             The DC DC3 is advertising as an LDAP server
             The DC DC3 is advertising as having a writeable directory
             The DC DC3 is advertising as a Key Distribution Center
             The DC DC3 is advertising as a time server
             [DC1] LDAP bind failed with error 8341,
             Win32 Error 8341.
             Server DC3 is advertising as a global catalog, but
             it could not be verified that the server thought it was a GC.
             ......................... DC3 failed test Advertising
          Starting test: KnowsOfRoleHolders
             Role Schema Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             [DC1] DsBindWithSpnEx() failed with error -2146893022,
             Win32 Error -2146893022.
             Warning: DC1 is the Schema Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Schema Owner, but is not responding to LDAP Bind.
             Role Domain Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the Domain Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Domain Owner, but is not responding to LDAP Bind.
             Role PDC Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the PDC Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the PDC Owner, but is not responding to LDAP Bind.
             Role Rid Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the Rid Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Rid Owner, but is not responding to LDAP Bind.
             Role Infrastructure Update Owner = CN=NTDS Settings,CN=DC1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK
             Warning: DC1 is the Infrastructure Update Owner, but is not responding to DS RPC Bind.
             Warning: DC1 is the Infrastructure Update Owner, but is not responding to LDAP Bind.
             ......................... DC3 failed test KnowsOfRoleHolders
          Starting test: RidManager
             * Available RID Pool for the Domain is 9126 to 1073741823
             * dc1.domain.COM.HK is the RID Master
             ......................... DC3 failed test RidManager
          Starting test: MachineAccount
             Checking machine account for DC DC3 on DC DC3.
             * SPN found :LDAP/DC3.domain.COM.HK/domain.COM.HK
             * SPN found :LDAP/DC3.domain.COM.HK
             * SPN found :LDAP/DC3
             * SPN found :LDAP/DC3.domain.COM.HK/domainHK
             * SPN found :LDAP/34106c30-327d-4d63-ae93-fec48cac2975._msdcs.domain.COM.HK
             * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/34106c30-327d-4d63-ae93-fec48cac2975/domain.COM.HK
             * SPN found :HOST/DC3.domain.COM.HK/domain.COM.HK
             * SPN found :HOST/DC3.domain.COM.HK
             * SPN found :HOST/DC3
             * SPN found :HOST/DC3.domain.COM.HK/domainHK
             * SPN found :GC/DC3.domain.COM.HK/domain.COM.HK
             ......................... DC3 passed test MachineAccount
          Starting test: Services
             * Checking Service: Dnscache
             * Checking Service: NtFrs
             * Checking Service: IsmServ
             * Checking Service: kdc
             * Checking Service: SamSs
             * Checking Service: LanmanServer
             * Checking Service: LanmanWorkstation
             * Checking Service: RpcSs
             * Checking Service: w32time
             * Checking Service: NETLOGON
                NETLOGON Service is paused on [DC3]
             ......................... DC3 failed test Services
          Test omitted by user request: OutboundSecureChannels
          Starting test: ObjectsReplicated
             DC3 is in domain DC=domain,DC=COM,DC=HK
             Checking for CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK in domain DC=domain,DC=COM,DC=HK on 1 servers
                Object is up-to-date on all servers.
             Checking for CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK in domain CN=Configuration,DC=domain,DC=COM,DC=HK on 1 servers
                Object is up-to-date on all servers.
             ......................... DC3 passed test ObjectsReplicated
          Starting test: frssysvol
             * The File Replication Service SYSVOL ready test
             File Replication Service's SYSVOL is ready
             ......................... DC3 passed test frssysvol
          Starting test: frsevent
             * The File Replication Service Event log test
             There are warning or error events within the last 24 hours after the          SYSVOL has been shared.  Failing SYSVOL replication problems may cause         
    Group Policy problems.
             An Warning Event occured.  EventID: 0x800034C4
                Time Generated: 11/04/2014   15:59:23
                (Event String could not be retrieved)
             ......................... DC3 failed test frsevent
          Starting test: kccevent
             * The KCC Event log test
             Found no KCC errors in Directory Service Event log in the last 15 minutes.
             ......................... DC3 passed test kccevent
          Starting test: systemlog
             * The System Event log test
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:11:27
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was
    ldap/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
    is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
             An Error Event occured.  EventID: 0x00000423
                Time Generated: 11/05/2014   11:11:27
                Event String: The DHCP service failed to see a directory server for authorization.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:29:56
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was
    LDAP/dc1.domain.COM.HK/[email protected]. This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this
    is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:29:56
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was domainHK\DC1$. This indicates that the password
    used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:43:20
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was cifs/dc1.domain.COM.HK. This indicates that the
    password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system
    administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:50:39
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was ldap/dc1.domain.COM.HK. This indicates that the
    password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.   Please contact your system
    administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:50:41
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was ldap/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK. 
    This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.  
    Please contact your system administrator.
             An Error Event occured.  EventID: 0x40000004
                Time Generated: 11/05/2014   11:50:41
                Event String: The kerberos client received a KRB_AP_ERR_MODIFIED error from the server host/dc1.domain.com.hk.  The target name used was LDAP/ba3f48bc-fa6a-4698-9947-ba8435cbf92b._msdcs.domain.COM.HK. 
    This indicates that the password used to encrypt the kerberos service ticket is different than that on the target server. Commonly, this is due to identically named  machine accounts in the target realm (domain.COM.HK), and the client realm.  
    Please contact your system administrator.
             ......................... DC3 failed test systemlog
          Test omitted by user request: VerifyReplicas
          Starting test: VerifyReferences
             The system object reference (serverReference)          CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK and backlink on         
    CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK          are correct.
             The system object reference (frsComputerReferenceBL)          CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK         
    and backlink on CN=DC3,OU=Domain Controllers,DC=domain,DC=COM,DC=HK are          correct.
             The system object reference (serverReferenceBL)          CN=DC3,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=domain,DC=COM,DC=HK         
    and backlink on          CN=NTDS Settings,CN=DC3,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=domain,DC=COM,DC=HK          are correct.
             ......................... DC3 passed test VerifyReferences
          Test omitted by user request: VerifyEnterpriseReferences
          Test omitted by user request: CheckSecurityError
       Running partition tests on : ForestDnsZones
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
       Running partition tests on : DomainDnsZones
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
       Running partition tests on : Schema
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
       Running partition tests on : Configuration
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
       Running partition tests on : domain
          Starting test: CrossRefValidation
             ......................... domain passed test CrossRefValidation
          Starting test: CheckSDRefDom
             ......................... domain passed test CheckSDRefDom
       Running enterprise tests on : domain.COM.HK
          Starting test: Intersite
             Skipping site Default-First-Site-Name, this site is outside the scope          provided by the command line arguments provided.
             ......................... domain.COM.HK passed test Intersite
          Starting test: FsmoCheck
             Warning: Couldn't verify this server as a GC in this servers AD.
             GC Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             PDC Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             Time Server Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             Preferred Time Server Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             KDC Name:
    \\dc1.domain.COM.HK
             Locator Flags: 0xe00003fd
             ......................... domain.COM.HK passed test FsmoCheck
          Test omitted by user request: DNS
          Test omitted by user request: DNS

  • Can't access some clien'ts features after migration Windows Server 2003 - 2008R2

    Hi,
    I have done migration of the domain controller from Windows Server 2003 to 2008R2. The old domain controller is set as a relay. After that, I have problems with the clients.
    Now with the 2008R2, it is impossible to:
    -Explore targeted computer's disks.
    -All RPC features.
    -The deployment by GPO is also impossible (Group Policy object did not apply because it failed with error code '0x80070015 The device is not ready).
    All of these features works well on the relay. I also can't shutdown a computer from a pc logged as Administrator.
    I've got the problem on the 3 sites I've migrate.
    Thanks.

    > The old domain controller is set as a relay.
    Please explain "relay" further. I never heard this label in terms of
    Domain Controllers...
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

    is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

    # As to what is the best browser, it is subjective. I think it is the best, others will disagree. There is no special version for Windows Server 2003, the usual version works on it.
    # It is free of charge and will always be free.
    # It is open source.
    # You can get it from http://www.mozilla.com

  • Can JDK1.3.1_16 be installed on Microsoft Server 2003, Standard Edition?

    Hello,
    I installed SDK1.3.1 update 16 on a computer with the operating system Microsoft Server 2003, Standard Edition.
    The JAVA_HOME variable was NOT automatically created as part of the installation. So I created it myself.
    I installed a voice recognition browser afterwards (that requires JDK1.3.1 update 06 or later) and it could not detect that the appropriate JDK had been installed and/or the JAVA_HOME variable had been set correctly.
    Is it normal for the JAVA_HOME variable to not be created automatically? If this is not normal, what could be the problem and how can I rectify it? Again I need a version of JDK 1.3.1 for the browser to work.
    Thanks,
    Bonnie

    Hi Bonnie
    Maybe a bit late to comment, but for the record...
    I just tried to install JDK1.3.1 on a Windows Server 2003 Standard Edition SP1 (version 5.2.3790) server.
    I initially tried to install 1.3.1_13, but java -version failed quietly with following error in eventvwr logs:
    Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
    The application, C:\jdk1.3.1_13\jre\bin\java.exe, generated an application error The error occurred on 03/30/2006 @ 08:47:35.425 The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)I tried uninstalling and reinstalling JDK from Add|Remove Programs, but without success.
    I then tried 1.3.1_8 and it worked fine first time.
    I then tried 1.3.1_12 and it failed with this eventvwr message
    Faulting application java.exe, version 0.0.0.0, faulting module jvm.dll, version 0.0.0.0, fault address 0x000bc1f8.
    The exception generated was c0000005 at address 6D4DC1F8 (jvm!gHotSpotVMIntConstantEntryValueOffset)The 1.3.1 documentation that I've read doesn't explicitly mention support for Server 2003.
    In contrast, 1.4 explicitly supports Server 2003.
    Regards
    Matthew

Maybe you are looking for