Can widget be made in a way that allows it to be running the entire time a particular ibook is open?

Functionality would require that a widget be running the entire time an ibook is open, not just while it was the particular page with the ibook.
If there is any way to have this sort of functionality, even if it isn't a widget I haven't been able to find any documentation about it.
Help would be appreciated.

Actually for the purposes of data tracking, trying to collect useful user data. Which would just need to collect user actions in the ibook.

Similar Messages

Imovie 11 - how can I shared to idvd a project that I modified and finalized for the second time?

I finalized a project (iMovie 11), shared with iDVD just as a test. Then I came back to the project, included A LOT of things, finalized again and when I shared to iDVD i just show the first finalized project. How can I work with my hole project in iDVD?
I tried to save as my project, but there is not this option.
Please HELP me. The old iMovie was much better. :-(.
Tks a lot
Gil

Try first sharing to Media Browser from iMovie in the Large Size.
After it is finished, you should be able to see it in the Media browser on the iDVD side of things. Drag it into a new project and continue working in iDVD.

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

Welcome to the Apple Community.
Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
Any responses you may receive may well be removed and would be wholly unreliable in any case.
If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value This launches Filemaker Go and directs the user to the Database Hosted online   Right now there is no app store for

Can I upload a simple iPhone App that all it does is direct the User to a Filemaker Pro URL   fmp://~filename.fmp?$VariableName=Value This launches Filemaker Go and directs the user to the Database Hosted online
Right now there is no app store for Filemaker Go.   Filemaker Forgot about us.
So I want to create a simple native iPhone App that all it does
is launch
fmp://~/filename.fmp12?$VariableName=value
This URL will launch the Filemaker Go App
Filemaker Go is a app that the user will have to have
downloaded already on the device..
The Simple Native app will launch the Filemaker Go.
The fmp URL has the information where the Filemaker Pro database is hosted
and get the user where they need to be..
Help Me please
iPhone 5s, iOS 8.1.3

That would be software. And, you said "upload." That's "uploading software." Why do you question what you stated?
I don't know where you even want to upload this software. The only way it can be downloaded to a device is through the iTunes store. Do you even know what you want to do?

I have a First Gen IPad with IOS 4.3.2. It let's me manage my music and videos together in playlists. Need a larger capacity IPAD, that allows me to manage playlists the same way. need direction or help!

I have a First Gen IPad with IOS 4.3.2. It let's me manage my music and videos together in playlists. Need a larger capacity IPAD, that allows me to manage playlists the same way. Need direction or help!
Can't seem to find an IPAD that let's me control my playlists together...or let's me organize my videos (Karaoke) the way I want to. Can someone help or direct me?
Can't even find the old IPad for sale...I have a MB292LL with 4.3.2 (8H7)

Here is a hint, google:
ipad video playlists
Found:
This discusses some options.
iOS 7 took away the ability to play videos continuously.
Two stand-alone apps.
https://itunes.apple.com/us/app/video-playlist-manager-lite/id399302583?mt=8
https://itunes.apple.com/us/app/joobik-video-playlist-player/id502325425?mt=8
There was a hint of relabeling your videos to music video so you can use the itunes video playlists.
I have not tried this.

How can I revert to a previous version that allows youtube download?

how can I revert to a previous version that allows youtube download?

Also, if I can do that without destroying my library and files, it would be great!!

HT1386 My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

You need to update to 10.6.8 using Software Update.

HT1476 I bought an adapter for my itouch 5 so that i won't need a computer to charge my itouch gen5 - however, i noticed that it was acting up in such a way that i was having difficulty swiping the screen and even tapping the icons.

I bought an adapter for my itouch 5 so that i won't need a computer to charge my itouch gen5 - however, i noticed that it was acting up in such a way that i was having difficulty swiping the screen and even tapping the icons. Is the only option for charging is the USB charger/connector? Or is there a specific device that I should use?

iPhone 5 and the 5th gen iPod touches are having this problem without a charger, and will probably be fixed in the 6.1 update. See http://www.imore.com/iphone-5-touchscreen-behaving-badly-under-multiple-rapid-sw ipes

How can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

how can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

If disabled because of a passcode, and you have not synced AFTER setting the passcode, you will have to force the phone into recovery mode & restore it as a new device. All data on your phone will be erased:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, setup as "new" will be your ONLY option.

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business! I could understand if they didn't know, but it is all over the Internet! When I went in to have it revert back to os6 (which worked fine!) I was actually asked if I had done any research before I installed the upgrade! As if this is the consumer's fault for being dumb enough to fall for the upgrade!

That is not what I have discovered, nor what others have discovered, nor what I was told when I went the Genius Bar. I cannot remotely mirror to my MacBook Pro and it only started the day after I installed the upgrade. We tested it with an iPad that had not been upgraded, no problem.

Is there a way to rename multiple Itunes songs at the same time

Is there a fast way to rename multiple Itunes songs at once, instead of renaming one song inside Itunes at a time? For example; So I can select multiple songs at once and rename each songs Genre all at the same time? Without needing to rename song by song?
Casey Computer

You can click on multiple songs, and change info in the Get Info > Info screen. This applies to most fields EXCEPT Name. iTunes has never allowed the simultaneous change of Name of multiple songs, presumably on the grounds that it is usually an error to do so.
Regarding Genre, yes, this can be changed for multiple songs at once, using the Info tab of Get Info.

Query all applications that are connected to database in the current time

Dears,
I need to query all applications that are connected to database in the current time. I tried using v$session but i could not reach through it to the application that are logged now to database.
As example, i connect to DB through Web Application and tried to search in v$session to can see Web Application session but i did not see it :(
From searching in google, found that there is a package named "DBMS_APPLICATION_INFO". I expected that it can help me in my request but i could not use it.
Please, advise me. Is this package help cover my requirements or there is another method ?
Thanks & Best regards,

sybrand_b,
I think that i appreciated you once you replied me and what i wanted exactly from you "Provide me Link help me more for investigation" and you did not provide something.
Where is the documentation that i could not read it !!!!!!
FYI, you are not the only one that have information_
Anyway ,as usual i will reply you in polite way.
Thanks and i will not have more input here with you !!!
Dear All,
Sorry for wasting your time to read this but i had to reply.
Please, if any one have more information regarding my issue, it will be highly appreciated.
Really , thanks all for support.
Thanks & Regards,

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

Is there a setting that needs to be set to allow the annotation features? I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

I keep getting a message that itunes incorrectly tried to run the C runtime library and now itunes won't work anyone know how to fix it?

My computer keeps telling me that itunes tried to incorrectly run the C runtime library and now I can't get into it, I've tried uninstalling and reinstalling it but nothing is working

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

How to create a proxy that accept requestes get/post in the same time?

Hi everybody,
I have two questions with Service Bus 11gR1.
I have to create a proxy in https that accept request get/post in the same time, also this proxy should be able to recognize the common name of the certificate.
Is it possibile?
Thanks a lot.
Ettore

The approach I mentioned is part of correctly configuring client cert authentication. For client cert authentication to succeed weblogic expects the user derived from the certificate by the user name mapper class to exist ( just exist , it wont check the password) in its security realm. The problem you have mentioned is common for any type of 'authentication' and not just specific to this approach.
The user name mapper class can be configured to accept any attribute in the certificate DN as the mapped user. Since the thread starter is interested in CN, then he has to set CN as the mapping attribute.
Edited by: atheek1 on Nov 10, 2010 1:33 AM

Can widget be made in a way that allows it to be running the entire time a particular ibook is open?

Similar Messages

Maybe you are looking for