Can window size be adjusted? It goes off the bottom of my iMac screen.

I can't get to the tool adjustments or the bins because they are off the bottom of my iMac 21.5" screen. Can't reach the screen corner to adjust window size. Any remedy?

Drag the top left of your PSE Window down and to the left to shrink the size of the window, then reposition the window so now you can see the bottom right corner.

Similar Messages

  • I just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

    i just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?

    Support articles for things like this would be here:
    http://www.apple.com/support/bootcamp

  • HT4865 How can I unlock iPhone 4 which goes off and on

    How can unlock my iPhone 4 which goes off and on every minute

    If it's going on and off every minute you'll have to place it in recovery mode to restore it, as explained here: http://support.apple.com/kb/ht1808.  This will erase the phone so you will have to restore to an existing backup after restoring, if you have one. 

  • The text goes off the screen and I can't move the screen to see what's not showing.

    The text does not fit on my screen. It goes off the side and there's no bar at the bottom to move it over. I have been using Mozilla Firefox for years but last week I downloaded the new toolbar and ever since then, I've had problems like this. I tried to fix it through "zoom" but that did not work. It only made the print smaller but it still went off the screen. Anything to the far right I could not see. To get it back to normal, I had to uninstall Firefox completely off my computer last week. Everything was fine then, by using Internet Explorer. I tried again today and downloaded Firefox but the same thing happened. Therefore, I'm going to uninstall Firefox...again and use Internet Explorer. Any suggestions for this problem? Once again, the "Zoom" solution DOES NOT WORK. Help!

    Hold keyboard key down for a second or two and select undock.
    http://i1224.photobucket.com/albums/ee374/Diavonex/a47dcbea54f27d03e3b7f4d411724 6c3_zps0388ccd4.jpg

  • When saving a file in Indesign the tab goes off the top of the page

    Having trouble with dragging the size of the artboard window and when I save a document the top of the tab goes off the page?

    Thank you for responding. Below is some info.
    Please see the clipping on the "d" in Pastel Bond and White Bond and the rounded part of the "R" in 2 &3 Part NCR. We have had this happen on occasion with other files as well. Thanks for the help.
    save as > photoshop PDF
    First dialogue box:
    Save: layers (checked)
    color: embed color profile: U.S. web coated (SWOP) ...
    Second dialogue box: high quality print
    options: none checked
    viewing PDF in preview on mac

  • Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    Hi i am have had a lot of trouble emptying my trash. when i go to put something in there it asks from my password and the item goes off the screen, but this does not clear any space on the hard drive.

    1. Triple-click the line below to select it:
    ~/.Trash
    2. Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu. An Info dialog should open.
    3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
    4. In the General section, uncheck the box marked Locked if it's checked.
    5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
    6. Close the Info window and test.

  • IPlanet 6.0 SP2 restart on Windows NT when a user logs off the server.

    UPDATE: We have found that the iWS 6.0 only restart with JDK 1.3.1 installed for JSP pages. What is the best JDK to use?
    iPlanet 6.0 SP2 restart on Windows NT when a user logs off the server. If a admin or joe developer logs into the server (C+A+D) and does what ever... When the
    person logs off the NT 4.0 box ... ALL the httpd process restart. We have 80 & 443 & Admin. The processes are running under a user account. Any one have an idea why the process are restarting?"

    Hi,
    You can use following JDK version for Windows NT.
    And please check it out whether WinNT-SP6 as been installed in winNT box.
    Window NT:
    SDK and JRE 1.4 http://java.sun.com/j2se/1.4/
    SDK and JRE 1.3.1_02 http://java.sun.com/j2se/1.3/
    SDK and JRE 1.2.2_011 http://java.sun.com/products/jdk/1.2/
    JDK and JRE 1.1.8_009
    http://java.sun.com/products/jdk/1.1/download-jdk-windows.html
    I hope this helps.
    Regards,
    Dakshin.
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support.

  • Score goes off the chart

    I have a song I imported from Garage Band. Basically I just want to print out one part for someone to read. When I go to score, the notated music goes "off the chart" way to the right. I have to scroll over to the right. The page setup and print view do the same thing. I want to see the score printed onto one page for a nice printable page view. What needs to be set up? I don't get what is causing this problem. Even setting the little green lines in score don't help. The notes still go past the green lines and onto the right forever. I would appreciate any help.
    Thanks,
    Michael Miller

    I have a vague recollection of seeing this problem in the past. Try going to File -> Page Setup and make sure the page size and scale settings are something reasonable.

  • My cursor keeps going off the page on the left when typing. How do i indent to permanently see the whole writing?

    When typing i hit the enter button and the cursor goes off the page on the left and it takes two spaces or letters before wording reappears; of course the first two letters of each word is missing. Only way to read correctly is to put two spaces before each line

    Are you zooming the page?
    You may have zoomed the page(s) by accident.
    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    Did you make changes to the default font settings?
    If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
    *Edit > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow pages to choose their own fonts.
    *Edit > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

  • Hi thee.  As logical as I can be.  I export a file back into my folder as a PSD.  I then export that file to PS.  Work on it, save and return it to LR.  The file goes to the bottom of the folder from where I have to put it back in the original place, taki

    Hi thee.  As logical as I can be.  I export a file back into my folder as a PSD.  I then export that file to PS.  Work on it, save and return it to LR.  The file goes to the bottom of the folder from where I have to put it back in the original place, taking time and driving me slightly mad.  Why does the file not go back to where it came from please?  Thanks  Tim

    Umm, but this folder is an amalgam of two cameras and five cards, and I want them in capture order!  Thanks for trying though Jim.
    Cheers
    Tim

  • How can I  delete pictures from my moments off the new IOS8

    How can I delete pictures from my moments off the new IOS8 when it doesnt give me the option to delete the photo itself? The icon of the trash doesnt appear what so ever. This is the only thing im dissapointed in the IOS8 update. Theres not even a camera roll where you can delete the photo like the IOS7

    Try this:
    1. Start from the homescreen of your Iphone/pod (for dummies: where all of your "apps" are).
    2. Look for an app on your homescreen titled "Photos", when you find it - Click it.
    3. When the app opens, go ahead and look towards the bottom of your phonescreen.
         You should see a navigation with three different options;
           "Photos", "Shared" & "Albums"; Why don't you just go ahead and click on "Albums", there we go - Very nice!
    4. On the next screen that appears, it should display your different albums.
         Look for "Recently Deleted", and when you find it - Click on it.
           It should be on that list somewhere (or there's a problem!).
    5. Now you should see a screen displaying all of the recent photos you've deleted.
         The term we know as "recent" to iOS is thirty days (that's 720 hours in people-time!).
           You will have to click to each individual photo, however at the bottom left-hand cornor of every photo take notice of the 'Delete' option.
    You're welcome.

  • Can I run two thunderbolt display monitors off of my new 27" iMac?

    Can I run two thunderbolt display monitors off of my new 27" iMac?

    Yes, the new iMac has two Thunderbolt ports. Plus Thunderbolt can be daisy chained thru external Thunderbolt drives and displays that have multiple ports.
    For more info, see >  Apple - Thunderbolt: Next-generation high-speed I/O technology.
    Although I'm not sure exactlly what Arrangement selections you will be offered in the Displays Preference, because I have not tested that setup myself...

  • Can access enforcer be implemented with going through the SOD check.

    Hi All,
    I have couple of questions regarding Access enforcer:
    1. Can Access enforcer be implemented with going through the SOD check?
    2. Can we provision roles for the project team using Access Enforcer (without having a million SOD conflicts which need to be cleared)?
    I would really appreciate any insight on these questions.
    Thanks

    https://websmp103.sap-ag.de/~form/sapnet?_FRAME=OBJECT&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000206624&_HIER_KEY=601100035870000212731&_HIER_KEY=601100035870000210510&_HIER_KEY=701100035871000519581&_SCENARIO=01100035870000000202&#HOME

  • IMovie cuts off the bottom 10% of my video image once it is moved to the editing area.  I need the whole image. How can I solve this?

    iMovie cuts off the bottom 10% of my video image once it is moved to the editing area.  I need the whole image. How can I solve this?

    I have solved the problem by changing the Project Aspect to 4:3 rather than wide screen.

  • My Macbook Pro Stops running as normal, when it is not connected to the charger. Once it goes off the plug, it slows down to a point where it is not usable.

    My Macbook Pro Stops running as normal, when it is not connected to the charger. Once it goes off the plug, it slows down to a point where it is not usable. is there any fix to this?

    https://support.apple.com/kb/HT3964

Maybe you are looking for

  • Re: HP Photosmart 7520 unable to connect to Web Services [ New ]

    I can't get it to work, I've tried all the suggestions

  • Watching music videos from iPad to tv

    I have a new Vizio Razor LED LCD HDTV and want to watch music videos I've purchased from iTunes currently located on my iPad on the TV.  The TV has a USB port.  Is there any way I can copy the files to a jump drive?  I don't want to hook my iPad up d

  • (-1200) DBMCconnBase::EndTransaction - Outgoing Payments

    Hi Experts, We are getting this error when trying to add an outgoing payment. (-1200) DBMCconnBase::EndTransaction SQLEndTran sqlState: , nativeErr: 68609788, errText:      C:\Program Files (x86)\SAP\SAP Business One\SAP Business One.exe     PID=3548

  • Can't compile APPS.PN_SPACE_ASSIGN_EMP_PKG !!!

    Dears, I have Oracle Applications 11.5.10.2 on Linux RED HAT 4. I face the error below when i try to compile the following packages: symptom: Can't compile APPS.PN_SPACE_ASSIGN_EMP_PKG and APPS.PN_SPACE_ASSIGN_CUST_PKG symptom: PLS-00390: undefined c

  • Connect to Oracle from PHP

    Hello I have problems to connect to Oracle database from PHP. I use php_oracle.dll. (I can't use OCI8 because the version of our oracle is 8.0). We have 2 oracle servers: One of them connect ok. But I can't connect to the second server. The main diff