Can work in Canada my Nokia 6680?

I will visit and long time stay in Canada.I lived in Sweden. I wondered for can used in my nokia 6680 for Canadian Mobil Providers? And have sim card also? I need know about it.. Thank You! P.s. sorry my bad english.

PaulJebara,
The iPhone is sold as carrier locked in both the U.S. and Canada.
Neither AT&T or Rogers/Fido offer an option for an authorized unlock.
The iPhone can be purchased in some other countries either already unlocked, or with an authorized unlock as an option. However, if you needed service or support, such as hardware repair, it would have to be handled in the country the iPhone was sold in.
For a list of countries that offer the iPhone, including which ones offer it unlocked or with an authorized unlock option see this article:
http://support.apple.com/kb/HT1937
Hope this helps,
Nathan C.

Similar Messages

Can the iphone 5s bought in HK can work in Canada LTE ?

can the iphone 5s bought in HK can work in Canada LTE ?

Hi Good morning!
When it comes to warranty it'll be applicable only in the country were you bought it from... now when it comes to international GSM usage you need to keep the following in mind:
T-Mobile is selling contractless iPhones (NOT FACTORY UNLOCKED), yes they are internationally sim unlocked as mentioned on the Apple online US store BUT it'll be under T-Mobile conditions which you can find here: http://support.t-mobile.com/docs/DOC-1588 (please read it before taking the decision).
So if you're expecting to buy an iPhone 5s either from Apple or T-Mobile (online or physical store) and use it out of the US since day one... You better wait until Apple itself releases the GSM unlocked version otherwise be ready to activate your phone with T-Mobile first and wait 40 as a minimun requirement to have it internationally unlocked and use it anywhere with GSM carriers. (Again, take a look at the previous link for full requirements).

Nokia 6680 can't be added in iSync 3.0 - fresh Leopard install

In Leopard (10.5), the Bluetooth setup assistant only gives me the option to use my Nokia 6680 as a modem. No options to sync it with the address book or the calendar. iSync finds the device, but says 'iSync cannot connect to this device'.
I have been able to sync my address book and calender in Tiger for some time now (I don't remember in which minor version update it was introduced).
The phone is still listed as supported on Apple's web pages. It is also mentioned in /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/ PlugIns/PhoneModelsSync.phoneplugin/Contents/Resources/MetaClasses.plist
However, it does not have its own folder under /Applications/iSync.app/Contents/PlugIns/ApplePhoneConduit.syncdevice/Contents/ PlugIns like many other phone models.
The Nokia software on my phone is (no vendor lock etc.)
V 5.04.07
15-02-06
RM-36
Nokia 6680
Any idea of what I might be doing wrong?
Thanks! Any answer would be greatly appreciated.
Best regards,
Lars Nummedal

Thanks, man!
I didn't think of deleting the old iSync agent on the phone - being used to the Mac just working out of the box
Mine also hung on 33 % progress for five minutes, but then it progressed and finished; importing all my contacts and calendars from the phone.
The 33 % for five minutes progress hang happened only on the first sync.
Best regards,
Lars Nummedal

ISync 2.2 and Nokia 6680 is not working for Ical and Contacts

Hi... I just uploaded to OS 10.4.6 and I Have iSync 2.2. My Nokia 6680 is recognised by iSync but not able to sync Ical and Contacts....just for internet connection....
Anyone knows the answer to my problem ?

I changed phone

Capture picture with nokia 6680

I'm developing an application for Nokia 6680, and need to access the videoplayer through my gui so I can capture a picture and send it to a webserver.
I'm having trouble initializing the player. It throws a MediaException with Symbian OS error -5, "the operation requested is not supported".
It works just fine in WTK 2.2 and with SE K700.
I've also checked the supports.video.capture system-property, and it returns true.
Here's the code:
class CameraForm extends Form implements CommandListener {
private final MyMIDlet midlet;
private final Command exitCommand;
private Command captureCommand = null;
private Player player;
private VideoControl videoControl;
private boolean active=false;
private StringItem messageItem;
   public CameraForm(MyMIDlet midlet){
      super("Camera");
      this.midlet=midlet;
      messageItem = new StringItem("Message","start");
      append(messageItem);
      exitCommand=new Command("Exit",Command.EXIT,1);
      addCommand(exitCommand);
      setCommandListener(this);
      //initialize camera
      try {
         player = Manager.createPlayer("capture://video");
         player.realize();
         //Grab the videoControl and set it to the current display
         videoControl=(VideoControl)(player.getControl("VideoControl"));
         if(videoControl != null){
             append((Item)(videoControl.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE,null)));
        captureCommand = new Command("Capture",Command.SCREEN,1);
        addCommand(captureCommand);
        messageItem.setText("OK");
    } else{
        messageItem.setText("No video control");
} catch(IOException ioe){
      messageItem.setText("IOException:"+ioe.getMessage());
} catch(MediaException me){
      messageItem.setText("MediaException cameraForm(): "+me.getMessage());
} catch(SecurityException se){
      messageItem.setText("Securityexception:"+se.getMessage());
}Thanks!

Peter,
Sorry for the late reply, have been really busy the past weeks.
Yesterday I got another Nokia 6680 on which my MIDlet wouldn't run. Got the MediaException -5 (meaning "Not Supported") again.
I tried the code *#7370# to hard reset the phone (see Step 1 below), with no success. But I did manage to get it working (after continuing with the procedure below).
The following explains the steps I followed:
NOTE: Backup all data on your phone before continuing as all will be lost!
Step 1:
a.) Enter the code *#7370#
b.) Answer [Yes] to the following prompt: "Restore all original phone settings? Phone will restart."
c.) Enter the security code when the phone prompts for it. (Default: 12345)
d.) The phone will now restart.
e.) Once restarted, all data will have been erased and the phone will ask you for some settings.
Step 2: This is a bit tricky...
a.) Turn off the phone.
b.) Press and hold the following keys: [Answer] + [*] + [3]
[Answer] = Answer key (green phone)
[*] = Star key
[3] = Numeric 3 key
c.) While holding the above keys, press the [Power] button to switch on the phone.
d.) Once again all data will have been erased and the phone will ask you for some settings.
Step 3:
Follow Step 1 again.
Install your application after each step and test to see if it isn't maybe working. My MIDlet only started working after completing Step 3. I am not sure if Step 1 is actually necessary, but I have listed it as this is the path I did folow.
That is it, hope this works for you.

Urgent Advice Nokia 6680

Hi. I need a big help. I own a Nokia 6680 that has lasted me for five years until yesterday. I usually maintain a four digit numeric password to access my cell whenever it is turned on. The digits are 2300. Once the password is entered then I will be have full access to use all the functions of the cell. Now the problem is that, the key pad number for Number 2 is not working! All other key pads are working. I took it to the local Nokia Care showroom where they say the problem is not the keypad but the board itself. I think they said the mother board is no longer working. However, if the motherboard is not working, then none of the keypads should work. Everything is working except for keypad Number 2. The Nokia Care persons tried replacing the keypad but still nothing worked. I am happy the 6680 has lasted me all these years, but the problem now is that I have more than 600 contact details on the phone memory that I am not able to access. Is there a WAY to break the password? Any software or device? Once the password is broken, then I can access the cell. Every few months I backup the phone memory details on the memory card but without accessing it on this cell, I am not able to retrieve it. That is the miserable part. I was told there is a software known as Noki Crack. Does this work? Or is there a simpler way? Please advice. Thank you.

Okey, I understand. Only a Nokia care point can fixe this for you as this is related to hw issue with your keyboard.
You can find your nearest Nokia care point here: http://europe.nokia.com/support/repair-and-recycle/repair/care-points

Nokia 6680 maximal MMC size

Hello
I want ask, what is maximal size of RS-DV-MMC cards that can be used in Nokia 6680. I was looking for it on web, but I didn't find it. I want buy 4GB card but I am not sure it will work properly, post, please, what card do you use and what biggest you tried (remember that card can work properly for example up to 2GB and when you reach this point it may crash etc.).
Thank you

It IS possible to change the font on a nokia 6680!
Just install a new font of a bigger size. More info can be found on : http://www.symbian-freak.com/tunning/fontquide/fonts.htm
CheersMessage Edited by z500 on 22-Nov-2005
07:12 PM

Trouble with Nokia 6680 and iSync

I have a Nokia 6680 and an iMac. Recently I wanted to clean up my contact list but I'm having problems in this.
Contacts created in the phone get transfered to my computer with iSync easy, but I can't transfer all my contacts created in my iMac to the Nokia 6680.
It used to work sincronizing a hundred contacts, but now I can't do it with 40 or 50. It's supposed to work all the ways but it doesn't.
What should I do? Is there any kind of limitation with my phone or iSync?

Hi trav!
We're having the exact same problem. If you search this forum (and others), you'll find more threads regarding this issue..
http://forum.java.sun.com/thread.jspa?threadID=641445&tstart=60
http://discussion.forum.nokia.com/forum/showthread.php?s=61e4114bdf2a110921bfd4bc2af40862&threadid=64240
It seems to be impossible to get in touch with Nokia developers. They are probably on vacation..
We've struggled with this for about 2 weeks now,and the most likely reason is:
1. It's a bug
2. The locator url has changed since the phone has two cameras.
Cheers,
H�vard

Upgrading a Car Kit from Nokia 6310i to Nokia 6680

I drive a Mercedes E320 which has a fitted car kit which takes a Nokia 6310i in a cradle. This works very well and is integrated to the car radio etc, it is not a Mercedes kit as it does not integrate to the Mercedes Command System (i.e. I can not push the button on the steering wheel to answer calls etc). I think it is Nokia Car Kit but I can not be sure as it is hidden under stacks of plastic and leather and it will be a devil of a job just to find the box.
Last year I upgraded to a Nokia 6680 (my trusty 6310i having decided to retire) and given the law on use of phone in cars I thought it about time I put a new car kit in the Merc, (I cant do with things in my ears, so headsets are out of the question). I have bought a CK-7W and the cradle for the 6680 but as it is going to be a difficult job to locate and replace the whole system (or expensive if I have the dealer do it) the question I want to ask is simple. Is it possible to just CUT the cables between the different cradles and thereby join the new 6680 cradle to the existing 6310i car kit, (I am quite proficient with a soldering iron and heat shrink tubing). OK, I know this is a bit Heath Robinson but if it will work then it will save me a whole load of time and inconvenience, or a whole stash of money as I don’t relish the thought of ripping out a Mercedes dashboard just to find the car kit
If it is possible does anyone know the cable colours (if they are not the same, between 6310i and 6680).
Thanks
David

Hi
The new cradle (CA27) will not work with the old car kit (assuming its the CARK-91).
But If you can locate the CARK-91 control box behind the dash (my guess is that it will be near the radio of behind the glove box), there is no need for cutting/ joining of wires.
Autoleads make an adaptor from the old Nokia 6-pin to the new 4-pin connector.
Its simply then a case of replacing the phone cradle, replacing the control box with CK-7W, swapping the other connectors (mic, speaker), plugging in the converter, and away you go.
Search for "06-208B Autoleads Adaptors" in Google for the converter (be careful - there is another adaptor that is 4-pin to 6-pin
Rgds
RichMessage Edited by rich_wookey on 05-Mar-2007
12:44 PM

Nokia 6680 Support..!

Hi, Everybody...
I have Nokia 6680 mobile, as i read it production date is 2005, and nokia corporation stopped production of it....
*Now i have some question about its support, and which thing can i do in many situations to renew it, here is it:
1- can i get updates for software for 6680 by nokia suite or PC suite??
2- if nokia didnt realease updates for it, can i download that old updates and install it by my computer??
3- its memory card is (MMC card), in my country i didnt found this type of memory, is that in all other countrys also??
4- is there any new mobiles use the same type of this card memory type, so i can find it??
5- if i have some problems in my 6680 mobile, can i take it to nokia care point??!! or they will say that there is no support for it now??
6- is there any type of support for it in the nokia sites??
7- is nokia still sell its accessories like handfree or memories cards or other in nokia stores???
8- what is other things can i do for my 6680 to (Refresh) it ?!!

Moron wrote:
Can i get updates for software for Nokia 6680 by Nokia Suite or PC Suite?
Yes. However, that is not your question: Whether you get the latest version, depends on your Nokia Product Code. Furthermore, the last version was released in 2005.
Moron wrote:
Can i download that old updates and install it by my computer?
Yes, Nokia Software Recovery Tool.
Moron wrote:
In my country, I didnt found this type of memory, is that in all other countrys also?
No, here, MMCmobile is still available on eBay, second-hand phone shops and camera shops.
Moron wrote:
Is there any new mobiles use the same type of this card memory type, so i can find it?
Not aware of, Nokia changed to microSD in 2007.
Moron wrote:
If i have some problems in my 6680 mobile, can I take it to Nokia Care Point?
Cannot speak for Nokia Care.
Moron wrote:
Is there any type of support for it in the nokia sites?
What are you looking for?
Moron wrote:
Is Nokia still sell its accessories like handfree in Nokia Stores?
Cannot comment because I am not aware of any Nokia Store worldwide anymore. Sometimes, genuine Nokia Care Centre do have old accessories. Nevertheless, they come at a price for those who really care. By the way, I recommend the Nokia AD-45 because with that you can attach any earphone you like.
Moron wrote:
What is other things can i do for my 6680 to (Refresh) it ?
Sell it as long as it works (and gives) money and move on to a Nokia E52.

New bugs in Nokia 6680 Firmware version 5.04.07 (1...

I've recently upgraded the firmware in my 6680 via my PC to the latest Nokia firmware (was originally running 4.04.07) and since doing this I've spotted two possible bugs.
The first is in the call log whereby the phone stops adding called numbers to the dialled, missed and received logs. Closing and re-opening the call log application on the phone doesn't clear this problem. When the phone is power-cycled (i.e. rebooted) the previous dialled calls re appear in the log. So far I've only spotted this problem once on Saturday, since I upgraded the software the previous Friday morning.
The second bug is a bit more frustrating whereby the phone appears to stop responding to voice commands. I use my phone a lot when driving with the CK-7W car kit, both in Bluetooth and wired mode depending how far I'm going. Twice now when I've pressed the remote button to activate voice dialling I've instantly got an error tone despite all the voice tags present on numbers stored in the phone. Again, power-cycling the phone seems to clear the problem.
Neil.

Further to my previous post on this, it appears that with the new firmware v5.04.07 my voice activated dialling stops working completely after a period of time when the phone has been turned on. If I reboot the phone the voice dialling and commands will work initially (using the Nokia remote button on the CK-7W), however after 3 or 4 hours of the phone being on it stops responding.
The problem manifests itself when I've been at work all day and the phone has been out of my car and left turned on. Later in the day when I travel back in my car and try to use voice activated dialling, I find it stops working and just gives me an error tone. I never had this problem with v4.04.07 installed on my phone and I find it quite frustrating as I can't even answer the phone remotely when it rings in the car!
I presume people from Nokia read these forums, please could you get your software engineers to look in to this for us as otherwise I'll have to take the phone back under warranty to an NSC and see if there's anyway the firmware can be rolled back to v4.04.07.
Neil.
PS: Apart from this problem, v5.04.07 is a much better software release and my phone and it's features in general work much better. I also like the way when pressing 'send' on the phone, it now doesn't mute my car radio until the call has successfully established on the network and starts ringing etc.

Strange problems with pc suite with nokia 6680

i'd had installed pc suite v6.7 on windows xp sp2 with all new adds from microsoft update(from a total succesuful uninstall with post addition of running nokia suite cleaner 3.1).
installation was perfect OK. I am using DKU2 cable
the suite recognize and install the correct drivers and the status was that "nokia 6680 was connected via USB"
all it seems ok and also nokia pc suite sais that the phone is connected but if you try to launch any application or to browse the phone with phone browser it goes to error (impossible to complete operation")
in my opinion there is something left or bad installed on the phone on previous attempt (probably the PC suite support application) because i was no asked of any confirm on the phone in the connection phase. In the c:/system dir on the phone infact there is a suiteconf.xml file related i think to that app.
IF it is the problem cause Please indicate how to clean the phone or how to install (even manually the correct app). ù
thanks

Do you mean that you cannot open any applicaiton in PC Suite ? (Backup, Sync, Application installer, Connect to Internet and all those ?) None of them won't even open up ? If that is the case, the installation has not succeeded and it does not relate to the SIS package that was installed during previous installations of PC Suite. Please indicate can you get any of the Nokia PC Suite applications to work (excluding the applications that are built in to Windows Explorer) then it is easier to try to figure out what is wrong.

Can not transfer contacts from Nokia 1020 Windows ...

Can not transfer contacts from Nokia 1020 Windows Phone to Mercedes C. Windows Phone states that it is only voice connection when trying to transfer data, and if sharing, Mercedes will not show up as bluetooth device at all. However Merceds show Noika as a device. I tried other phones and they work, smart phones and not smart phones. What to do?

Hi! Can't upload contacts from my nokia n8 to SkyDrive via nokia suite 3.8.48. i choose Instruments - upload to skydrive. then i log in my live.com account, then click "yes" for accses to my data and... nothing happens. initail "copying to skydrive" blue screen with only "later" button available. reinstalling nokia suite, rebootng my phone doesn't help.
Thanks!

Joikuspot not working on brand new Nokia 808

I've just purchased a Nokia 808 from Singapora and tried using Joikuspot. Unfortunately for some reason it fails to start a connection. I've made sure that BOTH mobile data and wifi are on as well. When I start the program, it asks if I want to start a connection (to which I say yes), I choose AT&T Internet and wait. I can see the 3G internet icon start up, but the wifi icon (or transmitting icon) never appears and the message "Connection failed, Connection unavailable" appears up at the top.
I've tried reinstalling Joikuspot (well, I purchased the premium version actually), reinstalling the phone software (via Nokia Suite) and doing a factory reset with no success. Internet and other apps seem to work fine under 3G and wifi as well so I'm not sure what's going on. Any information regarding the matter would be extremely helpful. Thanks everyone.
Jon
Btw, I've also contacted the people at Joiku and what they've recommended (factory reset, checking certain settings) hasn't worked either. :-(

Hi all,
This post is about using the third party application JoikuSpot in USA (and other FCC governed countries) and is copied to the following threads:
http://discussions.nokia.com/t5/Phone-Applications/Joikuspot-not-working-on-brand-new-Nokia-808/m-p/...
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Pureview-808-Intermittent-wireless-c...
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/Help-Does-non-US-variant-808-purevie...
1) It doesn't matter where you get your Nokia 808 PureView from, ie it doesn't matter if it's a US, Singapore or Finnish variant.. If you are using that device on a network/carrier in the US, the device recognises this and is not going to allow you to make Ad-Hoc wlan connections, as per the regulations set out by the FCC.
2) I understand (this I am not certain on) that the FCC regulations came into force in 2011. Therefore for any device manufacturer since then, the device is not allowed to create Ad-Hoc networks otherwise the device manufacturer wouldn't get FCC approval.
3) The FCC restrictons are in this case technically talking about Ad-Hoc networks, not 'wifi direct' (http://en.wikipedia.org/wiki/Wi-Fi_Direct) networks that are used for example in Lumia 610/710/800/900.
4) I understand the US Variants of Nokia 808 PureView do not have JoikuSpot preinstalled.
5) I understand that US customers are not able to purchase JoikuSpot from Nokia Store.
6) JoikuSoft should be aware of this as they are making the software to create the Ad-Hoc networks. I will find someone to talk to JoikuSoft, failing that I will do it myself. I noticed a post from 'greentoy' claiming "According to Joikusoft Support, It should work fine in US, but they didn't know for sure.". Greentoy, if you're reading this please post me the JoikuSoft contact you had so I can sort this out with them.
It goes without saying, if you have Nokia 808 PureView in the US, and are using JoikuSpot successfully, then I am happy for you and don't want to cause problems for you, but I suspect the FCC would be happy to tell you about their feelings..
Are there any other questions I should be aware of using JoikuSpot in the US before I try to get in touch with JoikuSoft?

Which iPad with retina display (4th generation) with cellular form USA can work in Egypt?

I am confused some people say AT&T are unlocked, other people confrims they are locked. I don't understand. In some countries like Canada, you don't have to choose a carrier. Can anyone confim to me that the AT&T work in Egypt with a local micro sim (I read the AT&T the only which can work outside USA)? Thanks to anyone who can help.

Sorry to thread jack. My question is not about the specifications. I have read them and am familiar with them. Ipads bought in the US are locked to the US carrier you select when you buy them. It has nothing to do with the specs. the Verizon and Sprint ipads have the same specs yet they are carrier locked for use in the US. ATT is the only GSM service in the US but I odnt know if you can just pop in a TMobile sim card for use in the USA. I'm trying to ascertain if ipads bought outside the US have the same limitations. You dont seem to have to choose a carrier when you select them at the uk store for instance so my impression is that they are not.

Can work in Canada my Nokia 6680?

Similar Messages

Maybe you are looking for