Can Xcelsius .sxf extract Windows userid??

Is there a way that an Xcelsius app can retrieve the userid of the Windows user who is running the Xcelsius .swf? I'd like to create an Xcelsius app that passes the userid to a web service in order to retrieve data that is specific to the user running the Xcelsius application.
Thanks

hi,,
as far as I know if we are using oracle as source or target db in goldengate, we may not use targetdb parameter. but we must use userid username@oraclesid. example: USERID hr@orcl. so it can connect to the right SID. you must also configure the tnsnames to point to the right SID.
Thanks,
Caterin

Similar Messages

Can i extract Windows XP pro from Virtual PC 7

Just purchased a new iMac and have installed Lion. I would like to load Windows and run Quicken 2009 using Bootcamp. I have Virtual PC for Mac Version 7. VPC7 has an embeded copy of Windows XP Pro. Does anyone know how to extract Windows XP Pro and load it on my iMac. Will Bootcamp recognize and utilize Windows XP Pro?
thanks for any advice

Yes, you can.
See the instrcutions here http://hints.macworld.com/article.php?story=20060527175405403
But be aware that the newer Macs (the 2011 released Macs) no longer support XP or Vista with BootCamp.
Only Windows 7 is supported on these Macs by Apple.
Stefan

Error to install Xcelsius 2008 on Windows vista. Error 1935.

I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
Error 1935 Error al instalar el ensamblado.
"Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

How can I install new windows on NB200-10z without a CD drive?

Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?

I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+

Can't boot to windows, stuck at black screen (with cursor)

Hi! I'll get straight to my problem: I can't boot to Windows (Windows 10 Technical Preview) anymore after installing VirtualBox (or rather, an Android emulator that installed VirtualBox) on my system. I get stuck, after the loading animation with the blue HP logo, on a black screen (I can move my cursor around) but the login screen never shows up.
The problem.
I'm currently dual-booting linux and windows for several purposes. My laptop came with a Windows 8.1 OS by default. Some time after the Windows 10 Tech Preview came out to public, I upgraded my system to Windows 10 (so my 8.1 is gone now). Everything's going well until I installed this Android emulator (which installed VirtualBox) on Windows 10. Everything seemed fine at first but after rebooting, Windows isn't working anymore. I can still boot to linux, but Windows just won't boot properly.
What I've tried.
I've tried A LOT of things. The problem actually happened twice already (at first I was able to fix it with System Restore but not this time around). I have a Windows 8 USB Recovery Drive at hand, just so I can access a Windows command line. It's not from my system, though. It came with a new windows 8 laptop of a friend so I just borrowed it.
1: System Restore. This worked the first time. But now the restore won't finish and throws an error, telling me that it can't restore my system.
2: Refresh PC. "There was a problem refreshing your PC. No changes were made." or something like that.
3: chkdsk on C:\. It says it changed some files, but it doesn't really fix the problem.
4: sfc /scannow. Again, something happened, but it didn't get fixed.
5: bootrec.exe to fix BCD and MBR. Doesn't work. (as far as I know my sytem is using GPT)
6: Hard reset (remove all power sources then hold power button). Still not working.
7: System Restore again. All the restore points aren't working. It reaches a "Finished" state, but then an error comes up after. It says can't extract a specific file, and the restore point is damaged or might have been deleted during restore.
8: checking and fixing bad sectors (nope, no bad sectors on my hard drive)
9: built-in component tests. It passed all of them, except the battery test (my battery really isn't surviving for any duration longer than 30 minutes, but that shouldn't affect my OS). I didn't try the really long tests since I thought it wouldn't matter as my problem is most probably completely software (since linux is still working).
10: cry. oh please. Windows isn't working. What should I do? (
Things I haven't tried.
1: RAM and CMOS battery reset.
2: Reset PC.
3: Format hard drive.
4: Test hard drive on another laptop's system.
If possible I'd like to avoid getting my hard drive wiped, since I have a lot of stuff to backup (more than 300 GB of files + dozens of linux apps and ppas), and I only have a 32GB USB drive to backup all the files I need).
Thanks for reading.

Sorry for the delay. Wasn't expecting the "road work" signs when attempting to check back with you in the AM here.
As others have already mentioned, the prompt for file systems occurs during text mode setup. Quick or Full? FAT or NTFS? How do you know what to do?
We'll start with file systems, short and sweet. Most any OS can read and write FAT volumes without fail which makes FAT ultra-portable, and the only choice if you want to let Mac OS write documents on your Windows volume. It's also more efficient on drives of 16 GB or less. However, FAT has no folder-level access control, so any file in the system can be manipulated by any user or by any system process. By contrast, NTFS is far more restrictive. It can only be manipulated under Windows, though other systems may be able to read it. Not only do you get the access control that FAT lacks, but you also get superior efficiency on large volumes, plus the power to compress or encrypt folders and files at will (in "business" flavors of Windows only--and yes, Vista Ultimate counts as "business" even though it will be supported much like a "consumer" version).
On format speeds: A quick format is very handy if you have a large partition or a single drive completely dedicated to Windows. Because it completes in 30 seconds or less, it will go a long way toward completing your Windows install. However, in some cases, volumes formatted with a quick format may have reliability issues. They must have fixed this in Vista, because Vista can only format at the "quick" speed.
A full format tests all blocks of a given volume (as opposed to testing an entire disk unless the volume itself is the entire disk) as the file system structure is laid down. Bad blocks are marked as "used" when they are found. This type of format takes much longer as a result of all the testing, but the result is a more stable volume from the start.
Get past the formatting stage, and you'll be right as rain.
Nate

IMacs can boot Linux or Windows from usb stick

iMacs 21' can boot Linux or Windows from usb stick? from Firewire 400 or 800 hdd/ssd? from USB HDD/SSD?
May boot fromCD/DVD/DVDDL in internal DVD DRIVE, too?
Exist Blu-ray drives able connect on Thunderbolt slot on iMac 21'?

Here is the memo of the steps I followed. Hope this helps.
<Create VHD image in temp folder at local drive>
diskpart
create vdisk file=C:\Temp\Win2go.vhd maximum=20480 type=fixed
select vdisk file=C:\Temp\Win2go.vhd
attach vdisk
exit
<Create partition in VHD, format in NTFS and assign drive letter "O">
diskpart
list disk
select disk n （n is a number of VHD）
clean
create partition primary
format fs=ntfs quick override
assign letter=o
active
attribute volume set NODEFAULTDRIVELETTER
exit
<Execute "DISM" utility in Windows DVD and extract installer image to VHD>
G:\sources\dism /apply-image /imagefile:G:\sources\install.wim /index:1 /applydir:O:\
** "G" is drive letter for Windows DVD
** "O" is drive letter for VHD partition
<Write boot program into VHD>
O:\windows\system32\bcdboot O:\windows /f ALL /s O:
** "O" is drive letter for VHD partition
<Detach VHD>
diskpart
select vdisk file=C:\Temp\Win2go.vhd
detach vdisk
exit
<Format USB thumb drive in NTFS>
diskpart
list disk
select disk n （n is a number of USB thumb drive）
clean
create partition primary
format fs=ntfs quick override
active
exit
** "E" is drive letter for USB thumb drive
<Write loader into boot sector>
G:\boot\bootsect /nt60 E:
** "G" is drive letter for Windows DVD
** "E" is drive letter for USB thumb drive
<Copy VHD file to USB thumb drive and mount>
copy C:\Temp\Win2go.vhd E:\
diskpart
select vdisk file=E:\Win2go.vhd
attach vdisk
exit
<Write boot info into USB thumb drive>
F:\Windows\system32\bcdboot F:\Windows /s E: /f ALL /v
** "E" is drive letter for USB thumb drive
** "F" is drive letter for VHD partition on USB thumb drive

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

How can i reopen all windows from last session on safari 6?

how can i reopen all windows from last session on safari 6?
finally found it .... sorry ...
Response:
System Preferences > General
Uncheck "Close windows when quitting an application"
Close
Ensure you have empty the Homepage on Safari
Safari > Preferences
Homepage = empty

Or... from the Safari menu bar click History > Reopen All Windows from Last Session

I lost my only navigation tool bar, so I can only open one window at a time, and can't use google. Help.

I'm not sure what I did, but I right clicked on my google tool bar (which I use since I can't find the Firefox navigation toolbar) and I somehow disabled it. Now I can only use one window at a time, and if I go to a website, I can't go to another without closing my current one so I can go to my homepage, which is google.

If the Menu Bar is hidden then press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also [[Menu bar is missing]] and http://kb.mozillazine.org/Toolbar_customization

Can iCloud on a Windows 7 PC be used with two different Apple accounts at the same time?

Can iCloud on a Windows 7 PC support two different Apple accounts at the same time?

You should be able to do this by using the Multifox add-on - http://br.mozdev.org/multifox/

How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
Or can I? Does anyone have a solution I don't realize exists?
Thanks,
Sowelu

AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs"; take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example. An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

How can I change the window size of iTunes? Used to be easy before installing Mavericks.

How can I change the window size of iTunes on my iMac? Used to be easy before installing Mavericks.

If you want to make the itunes tab so you can see the dock
you press the
esc
button if your in full screen mode
if you want to get into full screen mode you press the arrows facing away from eachother in the top right corner
there is another way to get to the normal tab if your in full screen
make the curser go right up to the top of the screen and it will show the apple tab
it will have two arrows facing together highlited in blue
if u tap that it will take you to the normal tab

How can I sync my windows outlook address to my ipad 2

How can I sync my windows outlook addresses and calendar to my ipad 2?

When you connect your iPad in iTunes, click on your iPad below "DEVICES", then click the tab "Info" and define on that page what you want to do.

Can Xcelsius .sxf extract Windows userid??

Similar Messages

Maybe you are looking for