Can XML files be used for data?

We have an XML file that contains all of the data we want to use for a model. Is there any way that this can be used instead of a database query?

If you find a JDBC driver for XML, then yes.
Check out the Visual Composer WIKI under JDBC:
https://wiki.sdn.sap.com/wiki/display/VC/Connectivity
and also
Where can I find JDBC drivers?
https://wiki.sdn.sap.com/wiki/display/VC/JDBC+Drivers

Similar Messages

Can a IDOC be used for data exchange from R/3 to CRM

Hi All,
First, can a IDOC be used for data exchange from R/3 to CRM
I need to update few fields of SAP CRM Sales order with fields from SAP R/3 Work Order.
To achive this can I use IDOC?
Or do I update the R/3 sales order from R/3 Work order(using some interface or workflow), so that the sales order data flows from R/3 SO to CRM SO.
Please respond immediately.
Regards,
Gopinath

IDocs can be processed by the CRM system via XML/XIF adaptor. As this will be most probably a new interface that is not yet set up, it would be easier to change the orders in R/3 via an appropiate FM which should automatically generate a delta download BDoc.
Even if they are not downloaded automatically a request download (defined via R3AR2 / 3 / 4) should take care of this.
Hope this helps,
Kai

Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin

Hi ,
We have a catalog that defines 2 types of products (they have too many different properties), so wanted to keep them on two different MDEX engines and serve the applications requests. Here DB catalog and front end ATG application is same for both the MDEX instances.
Is it possible to have 2 different output config XML files and index the data into 2 endeca apps using the same indexing component ProductCatalogSimpleIndexingAdmin?
Thanks
Dev

Hi, also have had some problem some monthes ago - I created separete component ProductCatalogSimpleIndexingAdminSecond. After that one of my colleage gave me some advice:
The creating separate component like ProductCatalogSimpleIndexingAdmin for the second IOC is possible way for resolving your situation. But I afraid that this way will be required creating mane duplicates for already existed components.
In my opinion the better way is the following:
starting from AssemblerApplicationConfiguration and ApplicationConfiguration component. It contains details for connecting between ATG and Endeca. Of course you should configure different components for different Endeca Apps.
After that:
Find all components that uses AssemblerApplicationConfiguration and ApplicationConfiguration. Customize these components for using one or another *Configuration component depending on what index works. (many variants released it: the most simple global custom component with flag.)
Then customize the existed ProductCatalogSimpleIndexingAdmin. Using one or another IOC and setting the flag in global custom component when index started. You can add some methods into your custom ProductCatalogSimpleIndexingAdmin like:
Execute baseline index for both IOC (one by one)
Execute baseline for IOC 1
Execute baseline for IOC 2.
Note: you should be afraid about incremental (partial) index in this configuration. But resolving conflicts in incremental index should be done after full implementation these changes.
Regards

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console

What web service & xml will be used for deleting the packged epub/pdf file from Admin Console?
I am able to delete the files from Admin console directy but not able to get which web service is calling on deleting the file from admin console:
Mangal

Hi Jim,
I tired following web service and xml to delete the packaged ebook but it is giving me error instead of response:
Web Service & XML
http://myserver_url/admin/ManageResourceKey
<request action="delete" auth="builtin" xmlns="http://ns.adobe.com/adept">
<nonce>" . $nonce . "</nonce>
<expiration>'. $expiration .'</expiration>
<resourceKey>
<resource>resource_id</resource>
<resourceItem>1</resourceItem>
</resourceKey>
</request>
Error Message
<error xmlns="http://ns.adobe.com/adept"
data="E_ADEPT_DATABASE http://myserver_url/admin/ManageResourceKey
Cannot%20delete%20or%20update%20a%20parent%20row:%20a%20foreign%20key%20constraint%20fails %20(`adept`.`distributionrights`,%20CONSTRAINT%20`distributionrights_ibfk_2`%20FOREIGN%20K EY%20(`resourceid`)%20REFERENCES%20`resourcekey`%20(`resourceid`))"/>
Magal Varshney

Can Adobe Distiller be used for converting all pro/e (3D -2D) files to pdf format?

Can Adobe Distiller be used for converting all pro/e (3D -2D) files to pdf format?

Acrobat Distiller Server converts Postscript to PDF.

Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?

Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
I've followed instructions with success until "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. " How do I do that?
I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed. (I'm on latest Maverick 10.9.2 on iMac) Then I dragged the VIDEO_TS file from my home DVD into the streamclip app. It asked which of 4 files to use, and I selected the first one. Streamclip played the video with the sound. so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

I apologize for not being able to find this answer on my own but can anybody please answer this: Can Adobe Premiere and Audition "Royalty Free" music files be used for "commercial" projects?

SusieBird
Are you using any version of Premiere Elements? Or, is it that you are really asking about some version of Premiere Pro and Audition?
If the latter, please refer to
Premiere Pro
Audition CS5.5, CS6 & CC
In the Adobe Premiere Elements Forum in which your thread has been posted, it has always been written by others (Bill Hunt, Steve Grisetti) that
Premiere Elements users can use Premiere Elements assets for commercial projects. I do not use Audition, so I cannot speak to the Audition situation.
We are a user to user forum here and not Adobe. The ultimate answers on this would be from Adobe itself to avoid what is written and what is written between
the lines.
ATR

"XML File not found for the Container DataBindings.cpx" error after deploy

Hello,
I have a problem with my JSP-Javaproject. Local works all fine but when i deploy my project to a Oracle Aplication Server i allway get this XML-File-Not-found exception:
oracle.jbo.NoXMLFileException: JBO-26001: XML File not found for the Container DataBindings.cpx
In my EAR-File the DataBindings.cpx is at:
\WEB-INF\classes\
My JSP-File:
<jbo:ApplicationModule id="AippackageModule" definition="DataBindings.DataModule" releasemode="Stateful" />
My web.xml:
<context-param>
<param-name>CpxFileName</param-name>
<param-value>DataBindings</param-value>
</context-param>
My DataBindings.cpx:
<?xml version='1.0' encoding='windows-1252' ?>
<Application xmlns="http://xmlns.oracle.com/adfm/application" id="DataBindings"
Package="" ClientType="Generic">
<pageMap>
</pageMap>
<pageDefinitionUsages>
<page id="eonerrorPageDef"
path="de.avacon.ahb.system.tools.pageDefs.eonerrorPageDef"/>
</pageDefinitionUsages>
<dataControlUsages>
<BC4JDataControl Configuration="AppModuleLocal"
Package="model.data"
xmlns="http://xmlns.oracle.com/adfm/datacontrol"
id="DataModule">
<Parameters/>
</BC4JDataControl>
</dataControlUsages>
</Application>
What can i do?
Thanks, steve

Adding the dependency in the ViewController fixed this for me.
I'm using two AppModules in the controller and the second one wasn't being picked up.
I was able to fix this by:
Go to the Project Properties, select Dependencies, edit the Dependent Projects and Archives, find the model that's failing and add a tick in the Build Output box.
The model should now be picked up in the ViewController's DataBindings.cpx source file, though I did have to restart JDev for this to be picked up.
HTH
Phil

Problem converting data in XML file to internal table data

Hi all,
I have a requirement. I need to convert an XML file to internal table data and based on that data do Goods Receipt in SAP.
With the help of this blog /people/r.eijpe/blog/2005/11/10/xml-dom-processing-in-abap-part-i--convert-an-abap-table-into-xml-file-using-sap-dom-approach
I am able to convert the XML file to data in SAP. But this blog will display the output on screen as ELELEMNT = nodename VALUE= value of that node.
But I donu2019t want in that way, I want to store all the data in XML file in an internal table so that I can make use of those values and do Goods Recipt in SAP.
Can some one suggest how should I read the data in an internal table.
Here is my code..what changes should I make?
*& Report z_xit_xml_check
REPORT z_xit_xml_check.
TYPE-POOLS: ixml.
TYPES: BEGIN OF t_xml_line,
 data(256) TYPE x,
 END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
 l_streamfactory TYPE REF TO if_ixml_stream_factory,
 l_parser TYPE REF TO if_ixml_parser,
 l_istream TYPE REF TO if_ixml_istream,
 l_document TYPE REF TO if_ixml_document,
 l_node TYPE REF TO if_ixml_node,
 l_xmldata TYPE string.
DATA: l_elem TYPE REF TO if_ixml_element,
 l_root_node TYPE REF TO if_ixml_node,
 l_next_node TYPE REF TO if_ixml_node,
 l_name TYPE string,
 l_iterator TYPE REF TO if_ixml_node_iterator.
DATA: l_xml_table TYPE TABLE OF t_xml_line,
 l_xml_line TYPE t_xml_line,
 l_xml_table_size TYPE i.
DATA: l_filename TYPE string.
PARAMETERS: pa_file TYPE char1024 DEFAULT 'c:\temp\orders_dtd.xml'.
Validation of XML file: Only DTD included in xml document is supported
PARAMETERS: pa_val TYPE char1 AS CHECKBOX.
START-OF-SELECTION.
Creating the main iXML factory
 l_ixml = cl_ixml=>create( ).
Creating a stream factory
 l_streamfactory = l_ixml->create_stream_factory( ).
 PERFORM get_xml_table CHANGING l_xml_table_size l_xml_table.
wrap the table containing the file into a stream
 l_istream = l_streamfactory->create_istream_itable( table = l_xml_table
 size = l_xml_table_size ).
Creating a document
 l_document = l_ixml->create_document( ).
Create a Parser
 l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
 istream = l_istream
 document = l_document ).
Validate a document
 IF pa_val EQ 'X'.
 l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
 ENDIF.
Parse the stream
 IF l_parser->parse( ) NE 0.
 IF l_parser->num_errors( ) NE 0.
 DATA: parseerror TYPE REF TO if_ixml_parse_error,
 str TYPE string,
 i TYPE i,
 count TYPE i,
 index TYPE i.
 count = l_parser->num_errors( ).
 WRITE: count, ' parse errors have occured:'.
 index = 0.
 WHILE index < count.
 parseerror = l_parser->get_error( index = index ).
 i = parseerror->get_line( ).
 WRITE: 'line: ', i.
 i = parseerror->get_column( ).
 WRITE: 'column: ', i.
 str = parseerror->get_reason( ).
 WRITE: str.
 index = index + 1.
 ENDWHILE.
 ENDIF.
 ENDIF.
Process the document
 IF l_parser->is_dom_generating( ) EQ 'X'.
 PERFORM process_dom USING l_document.
 ENDIF.
*& Form get_xml_table
FORM get_xml_table CHANGING l_xml_table_size TYPE i
 l_xml_table TYPE STANDARD TABLE.
Local variable declaration
 DATA: l_len TYPE i,
 l_len2 TYPE i,
 l_tab TYPE tsfixml,
 l_content TYPE string,
 l_str1 TYPE string,
 c_conv TYPE REF TO cl_abap_conv_in_ce,
 l_itab TYPE TABLE OF string.
 l_filename = pa_file.
upload a file from the client's workstation
 CALL METHOD cl_gui_frontend_services=>gui_upload
 EXPORTING
 filename = l_filename
 filetype = 'BIN'
 IMPORTING
 filelength = l_xml_table_size
 CHANGING
 data_tab = l_xml_table
 EXCEPTIONS
 OTHERS = 19.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
Writing the XML document to the screen
 CLEAR l_str1.
 LOOP AT l_xml_table INTO l_xml_line.
 c_conv = cl_abap_conv_in_ce=>create( input = l_xml_line-data replacement = space ).
 c_conv->read( IMPORTING data = l_content len = l_len ).
 CONCATENATE l_str1 l_content INTO l_str1.
 ENDLOOP.
 l_str1 = l_str1+0(l_xml_table_size).
 SPLIT l_str1 AT cl_abap_char_utilities=>cr_lf INTO TABLE l_itab.
 WRITE: /.
 WRITE: /' XML File'.
 WRITE: /.
 LOOP AT l_itab INTO l_str1.
 REPLACE ALL OCCURRENCES OF cl_abap_char_utilities=>horizontal_tab IN
 l_str1 WITH space.
 WRITE: / l_str1.
 ENDLOOP.
 WRITE: /.
ENDFORM. "get_xml_table
*& Form process_dom
FORM process_dom USING document TYPE REF TO if_ixml_document.
 DATA: node TYPE REF TO if_ixml_node,
 iterator TYPE REF TO if_ixml_node_iterator,
 nodemap TYPE REF TO if_ixml_named_node_map,
 attr TYPE REF TO if_ixml_node,
 name TYPE string,
 prefix TYPE string,
 value TYPE string,
 indent TYPE i,
 count TYPE i,
 index TYPE i.
 node ?= document.
 CHECK NOT node IS INITIAL.
 ULINE.
 WRITE: /.
 WRITE: /' DOM-TREE'.
 WRITE: /.
 IF node IS INITIAL. EXIT. ENDIF.
create a node iterator
 iterator = node->create_iterator( ).
get current node
 node = iterator->get_next( ).
loop over all nodes
 WHILE NOT node IS INITIAL.
 indent = node->get_height( ) * 2.
 indent = indent + 20.
 CASE node->get_type( ).
 WHEN if_ixml_node=>co_node_element.
 element node
 name = node->get_name( ).
 nodemap = node->get_attributes( ).
 WRITE: / 'ELEMENT :'.
 WRITE: AT indent name COLOR COL_POSITIVE INVERSE.
 IF NOT nodemap IS INITIAL.
 attributes
 count = nodemap->get_length( ).
 DO count TIMES.
 index = sy-index - 1.
 attr = nodemap->get_item( index ).
 name = attr->get_name( ).
 prefix = attr->get_namespace_prefix( ).
 value = attr->get_value( ).
 WRITE: / 'ATTRIBUTE:'.
 WRITE: AT indent name COLOR COL_HEADING INVERSE, '=',
 value COLOR COL_TOTAL INVERSE.
 ENDDO.
 ENDIF.
 WHEN if_ixml_node=>co_node_text OR
 if_ixml_node=>co_node_cdata_section.
 text node
 value = node->get_value( ).
 WRITE: / 'VALUE :'.
 WRITE: AT indent value COLOR COL_GROUP INVERSE.
 ENDCASE.
 advance to next node
 node = iterator->get_next( ).
 ENDWHILE.
ENDFORM. "process_dom
Any help would be highly apperciated.
regards,
Jessica Sam

Pavel Vera,
With your example i tries doing the following .....
I tried to convert the data of XML file to internal table data. I am collecting the data in internal table to do goos recipt with that data.
Please find my XML file, ABAP pgm and XSLT pgm . I donu2019t know what I am missing I am not getting any output. I donu2019t know what is wrong please help me with this
Below is my XML file, My code and XSLT Program. In the below XML file I need to collect Vendor Number, Order Number, and Date tags which occur only once for one XML file.
I also need to collect the following tags from <Shipmentdetail>
<Shipmentdetail> has following child nodes and I need to collect them
TrackingNumber
Freight
Weight
ShipmentDate
ShipmentMethod
Need to collect to collect the following tags from <ProductInformation>
<ProductInformation> has following child nodes and I need to collect them
 LineNumber
 SKUNumber
 OrderedQuantity
 ShippedQuantity
 UOM
The <Shipmentdetail> and <ProductInformation> are child nodes of <OrderShipment>
The <Shipmentdetail> occurs only ones but the <ProductInformation> can occur once or many times and will be dynamic and differs depening on the input file.
My XML file is as follows
<?xml version="1.0" encoding="iso-8859-1" ?>
- <ShipmentHeader>
<AccountID />
- <OrderShipment>
 <VendorNumber>1000</VendorNumber>
 <OrderNumber>P00009238</OrderNumber>
 <OrderType>Stock</OrderType>
 <Company />
 <Division />
 <Department />
 <Date>20061120</Date>
 <CartonCount>2</CartonCount>
 <ShipAllProducts>No</ShipAllProducts>
- <ShipmentDetail>
 <TrackingNumber>1ZR3W891PG47477811</TrackingNumber>
 <Freight>000000010000</Freight>
 <ShipmentDate>20061120</ShipmentDate>
 <ShipmentMethod>UPS1PS</ShipmentMethod>
 </ShipmentDetail>
- <ProductInformation>
 <LineNumber>000000001</LineNumber>
 <SKUNumber>110FR</SKUNumber>
 <AdvSKUNumber>003 4518</AdvSKUNumber>
 <SKUID />
 <OrderedQuantity>00000001000000</OrderedQuantity>
 <ShippedQuantity>00000001000000</ShippedQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </ProductInformation>
- <ProductInformation>
 <LineNumber>000000002</LineNumber>
 <SKUNumber>938EN</SKUNumber>
 <AdvSKUNumber>001 7294</AdvSKUNumber>
 <SKUID />
 <OrderedQuantity>00000000450000</OrderedQuantity>
 <ShippedQuantity>00000000450000</ShippedQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </ProductInformation>
- <CaseInformation>
 <LineNumber>000000001</LineNumber>
 <SKUNumber>110FR</SKUNumber>
 <AdvSKUNumber>003 4518</AdvSKUNumber>
 <SKUID />
 <SSCCNumber>00000001668000002487</SSCCNumber>
 <CaseQuantity>00000001000000</CaseQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </CaseInformation>
 <CaseInformation>
 <LineNumber>000000001</LineNumber>
 <SKUNumber>110FR</SKUNumber>
 <AdvSKUNumber>003 4518</AdvSKUNumber>
 <SKUID />
 <SSCCNumber>00000001668000002487</SSCCNumber>
 <CaseQuantity>00000001000000</CaseQuantity>
 <UOM>EA</UOM>
 <Factor>1</Factor>
 </CaseInformation>
- </OrderShipment>
</ShipmentHeader>
My Program
TYPE-POOLS abap.
CONSTANTS gs_file TYPE string VALUE 'C:\temp\test.xml'.
* This is the structure for the data from the XML file
TYPES: BEGIN OF ts_shipment,
 VendorNumber(10) TYPE n,
 OrderNumber(20) TYPE n,
 OrderType(8) TYPE c,
 Date(8) TYPE c,
 END OF ts_shipment.
TYPES: BEGIN OF ts_shipmentdetail,
 TrackingNumber(30) TYPE n,
 Freight(12) TYPE n,
 Weight(14) TYPE n,
 ShipmentDate(8) TYPE c,
 ShipmentMethod(8) TYPE c,
 END OF ts_shipmentdetail.
TYPES: BEGIN OF ts_productinformation,
 LineNumber(9) TYPE n,
 SKUNumber(20) TYPE c,
 OrderedQuantity(14) TYPE n,
 ShippedQuantity(14) TYPE n,
 UOM(4) TYPE c,
 END OF ts_productinformation.
* Table for the XML content
DATA: gt_itab TYPE STANDARD TABLE OF char2048.
* Table and work ares for the data from the XML file
DATA: gt_shipment TYPE STANDARD TABLE OF ts_shipment,
 gs_shipment TYPE ts_shipment.
DATA: gt_shipmentdetail TYPE STANDARD TABLE OF ts_shipmentdetail,
 gs_shipmentdetail TYPE ts_shipmentdetail.
DATA: gt_productinformation TYPE STANDARD TABLE OF ts_productinformation,
 gs_productinformation TYPE ts_productinformation.
* Result table that contains references
* of the internal tables to be filled
DATA: gt_result_xml TYPE abap_trans_resbind_tab,
 gs_result_xml TYPE abap_trans_resbind.
* For error handling
DATA: gs_rif_ex TYPE REF TO cx_root,
 gs_var_text TYPE string.
* Get the XML file from your client
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
 filename = gs_file
CHANGING
 data_tab = gt_itab
EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 not_supported_by_gui = 17
 error_no_gui = 18
 OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPMENT".
GET REFERENCE OF gt_shipment INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPMENT'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "ISHIPDET".
GET REFERENCE OF gt_shipmentdetail INTO gs_result_xml-value.
gs_result_xml-name = 'ISHIPDET'.
APPEND gs_result_xml TO gt_result_xml.
* Fill the result table with a reference to the data table.
* Within the XSLT stylesheet, the data table can be accessed with
* "IPRODDET".
GET REFERENCE OF gt_productinformation INTO gs_result_xml-value.
gs_result_xml-name = 'IPRODDET'.
APPEND gs_result_xml TO gt_result_xml.
* Perform the XSLT stylesheet
TRY.
 CALL TRANSFORMATION z_xml_to_abap3
 SOURCE XML gt_itab
 RESULT (gt_result_xml).
CATCH cx_root INTO gs_rif_ex.
 gs_var_text = gs_rif_ex->get_text( ).
 MESSAGE gs_var_text TYPE 'E'.
ENDTRY.
* Writing the data from file for gt_shipment
*Collecting the Shipping Data from the XML file to internal table gt_shipment
*and writing the data to the screen
LOOP AT gt_shipment INTO gs_shipment.
WRITE: / 'VendorNumber:', gs_shipment-VendorNumber.
WRITE: / 'OrderNumber :', gs_shipment-OrderNumber.
WRITE: / 'OrderType :', gs_shipment-OrderType.
WRITE: / 'Date :', gs_shipment-Date.
WRITE : /.
ENDLOOP. "gt_shipment.
LOOP AT gt_shipmentdetail INTO gs_shipmentdetail.
WRITE: / 'TrackingNumber:', gs_shipmentdetail-TrackingNumber.
WRITE: / 'Freight :', gs_shipmentdetail-Freight.
WRITE: / 'Weight :', gs_shipmentdetail-Weight.
WRITE: / 'ShipmentDate :', gs_shipmentdetail-ShipmentDate.
* WRITE: / 'ShipmentMethod :' gs_shipmentdetail-ShipmentMethod
WRITE : /.
ENDLOOP. "gt_shipmentdetail.
LOOP AT gt_productinformation INTO gs_productinformation.
WRITE: / 'LineNumber:', gs_productinformation-LineNumber.
WRITE: / 'SKUNumber :', gs_productinformation-SKUNumber.
WRITE: / 'OrderedQuantity :', gs_productinformation-OrderedQuantity.
WRITE: / 'ShippedQuantity :', gs_productinformation-ShippedQuantity.
WRITE: / 'UOM :', gs_productinformation-UOM.
WRITE : /.
ENDLOOP. "gt_productinformation.
XSLT Program
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output encoding="iso-8859-1" indent="yes" method="xml" version="1.0"/>
<xsl:strip-space elements="*"/>
<xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <ISHIPMENT>
 <xsl:apply-templates select="//OrderShipment"/>
 </ISHIPMENT>
 </asx:values>
 </asx:abap>
</xsl:template>
<xsl:template match="OrderShipment">
 <item>
 <VENDORNUMBER>
 <xsl:value-of select="VendorNumber"/>
 </VENDORNUMBER>
 <ORDERNUMBER>
 <xsl:value-of select="OrderNumber"/>
 </ORDERNUMBER>
 <ORDERTYPE>
 <xsl:value-of select="OrderType"/>
 </ORDERTYPE>
 <DATE>
 <xsl:value-of select="Date"/>
 </DATE>
 </item>
</xsl:template>
<xsl:template match="/">
 <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
 <asx:values>
 <ISHIPDET>
 <xsl:apply-templates select="//OrderShipment/ShipmentDetail"/>
 </ISHIPDET>
 </asx:values>
 </asx:abap>
</xsl:template>
<xsl:template match="ShipmentDetail">
 <item>
 <TRACKINGNUMBER>
 <xsl:value-of select="TrackingNumber"/>
 </TRACKINGNUMBER>
 <FREIGHT>
 <xsl:value-of select="Freight"/>
 </FREIGHT>
 <SHIPMENTDATE>
 <xsl:value-of select="ShipmentDate"/>
 </SHIPMENTDATE>
 <SHIPMENTMETHOD>
 <xsl:value-of select="ShipmentMethod"/>
 </SHIPMENTMETHOD>
 </item>
</xsl:template>
</xsl:transform> .
Any help is highly appreciated. If anyone encountered this situation before please let me know where i am going wrong in my XSLT transformation.
Any Help will be highly apppreciated. Thanks in advance
Regards,
Jessica Sam

Generate XML file dynamically using java

Hi,
I searched on this topic on the net and also in this forum but everything leads to parsing an existing file using JAXP technology. But i need to create an xml file dynamically from the data coming from a different source. I can do it manually by writting the content to a file. But i am sure there is a better way for it. I would be obliged if some one could give me and example java class which produces a simple xml file or direct me to any resource online.
Thank you in advance.

Yes you can create the xml file dynamically. Like this,
BufferedWriter bw = new BufferedWriter(new FileWriter("xyz.xml"));
bw.write(buffer.toString()); //where buffer is StringBuffer whcih contains the your xml data
bw.close();
Remember to close the BufferedWriter, otherwise it will create the file but don't write anything.
Hope this will help u.
....yogesh

How do I modify invoice request xml file by adding posting date?

Hi,
We import customer invoice requests via xml files from an external data source. Currently the standard SAP xml file does not include the posting date, and invoices enter SAP with a blank posting date. When the invoice is released, the posting date is taken from the invoice date.
Due to our month end processes, we have hundreds of invoice requests every month where we do not want posting date to equal the invoice date, and for each of those invoices the posting date is manually entered one invoice at a time during the release process. This is very time consuming.
We would like to build functionality in our external system to create the posting date at the xml file generation stage. Could anyone let us know the following:
- what is the name of the posting date field on invoice requests (invoice documents)?
- where would we place the additional script in the xml file?
I'm attaching one of our current xml files (which already contains one section that has been customized)
Your suggestions would be appreciated.
Thanks,
Kerstin

Kerstin,
The closest i could find in the WSDL of the Manage Invoice Request Web Service that handles this integration is "<ProposedInvoiceDate>" or possibly even "<ProposedDeviatingPostingdate>", both of which sit directly under the <CustomerInvoiceRequest> element.
For more information, go to the Service Explorer, find the ManageInvoiceRequestsIn Web Service, download the WSDL, and open it in SOAP-UI or something similar. This way you can see all the fields that you can write to, which is where i found these two elements.

How to keep XML file in memory for specified period ?

How to keep XML file in memory for specified period or forever, I have 5 applications running on WebSphere I wants to use XML file for all the applications. I mean when one apllication is not using XML file still I wants to keep it in memory ...
Thanx in advance ,

Hello,you can create a DocumentManager class,
here is my solution in the past...
you can use static Hashtable save the xml's Document,if one application want get
a appointed Document.first,you can find it from Hashtable,if can't find it ,you
can create it and put into Hashtable,if the words fail to express the meaning,sorry,my english is limited
package com.foresee.xfiles.util;
import java.util.*;
import org.w3c.dom.*;
import org.apache.log4j.*;
import com.foresee.xfiles.common.*;
import com.foresee.xfiles.server.exception.*;
import com.foresee.xfiles.util.*;
* Title: 
* Description: 
* Copyright: Copyright (c) 2002
* Company: 
* @author unascribed
* @version 1.0
public final class DocumentManager {
private static Category m_log = Category.getInstance(DocumentManager.class.getName());
static {
PropertyConfigurator.configure(Configurator.getLCF());
public DocumentManager() {
//synchronized
public static synchronized Document getTransitionDoc(String path) throws SchemaCheckOutException{
Document m_TransitionDoc;
m_TransitionDoc = (Document)TransitionDoc.get(path);
if (m_TransitionDoc == null){
XmlHelper m_xh = new XmlHelper();
try{
m_TransitionDoc = m_xh.getDocument(path);
}catch (SchemaCheckOutException se){
m_log.error("��"+path+"��:"+se.getUserMsg());
throw se;
TransitionDoc.put(path,m_TransitionDoc);
return m_TransitionDoc ;
public static synchronized Document getLogicCheckDoc(String path) throws SchemaCheckOutException{
Document m_LogicCheckDoc;
m_LogicCheckDoc = (Document)LogicCheckDoc.get(path);
if (m_LogicCheckDoc == null){
XmlHelper m_xh = new XmlHelper();
try{
m_LogicCheckDoc = m_xh.getDocument(path);
}catch (SchemaCheckOutException se){
m_log.error("��"+path+"��:"+se.getUserMsg());
throw se;
LogicCheckDoc.put(path,m_LogicCheckDoc);
return m_LogicCheckDoc ;
public static Hashtable TransitionDoc = new Hashtable();
public static Hashtable LogicCheckDoc = new Hashtable();

How to read XML file and update the data in MS CRM 2011?

Hi Folks,
Can anyone please help me finding some references to read XML files and push the data to MS CRM 2011 preferably by using a console application.
Please let me know if any ways of handling it in simple ways.
Thanks,
Sri

HI,
How to read XML file:
https://social.msdn.microsoft.com/Forums/en-US/5dd7261b-86c4-4ca8-ba87-95196ef3ba50/need-to-display-xml-file-in-textboxes-edit-the-data-and-save-the-new-xml-file?forum=csharpgeneral
How to work with CRM:
ClientCredentials credentials = new ClientCredentials();
credentials.Windows.ClientCredential = new System.Net.NetworkCredential("USER", "Password", "Domain");
Uri uri = new Uri("http://server/Organization/XRMServices/2011/Organization.svc");
OrganizationServiceProxy proxy = new OrganizationServiceProxy(uri, null, credentials, null);
proxy.ServiceConfiguration.CurrentServiceEndpoint.Behaviors.Add(new ProxyTypesBehavior());
IOrganizationService service = (IOrganizationService)proxy;
//using "service" you can create, update and retrieve entities.
More information here about service functions:
https://msdn.microsoft.com/en-us/library/gg328198.aspx

Connection has no password, -jdbc.xml file not generated for connection

Hi,
I'm migrating a jdev 10g web application (with EJB) to 11g, i did the automatic migration tool offred by 11g, i'm using the integrated weblogic server but it seems there is a *-jdbc.xml file missed, and it must be generated, this is the log file of the start of server :
IntegratedWebLogicServer started.
[Running application SAB_ADMIN on Server Instance IntegratedWebLogicServer...]
[09:14:15 AM] ---- Deployment started. ----
[09:14:15 AM] Target platform is (Weblogic 10.3).
[09:14:18 AM] Retrieving existing application information
[09:14:19 AM] Running dependency analysis...
[09:14:19 AM] Deploying 4 profiles...
[09:14:21 AM] Wrote Web Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ViewControllerWebApp.war
[09:14:21 AM] Wrote Web Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelWebApp.war
[09:14:25 AM] Wrote EJB Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelEJB.jar
[09:14:25 AM] WARNING: Connection DBConnectionSAB has no password. DBConnectionSAB-jdbc.xml file not generated for connection DBConnectionSAB.
[09:14:26 AM] Wrote Enterprise Application Module to C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN
[09:14:26 AM] Deploying Application...
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.065--ServerSession(40464643)--property eclipselink.jdbc.user is deprecated, property javax.persistence.jdbc.user should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.driver is deprecated, property javax.persistence.jdbc.driver should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.url is deprecated, property javax.persistence.jdbc.url should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:28.299--ServerSession(40464643)--property eclipselink.jdbc.password is deprecated, property javax.persistence.jdbc.password should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.user.Session_user.mergeEntity(java.lang.Object)' in EJB 'SessionEJB' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'SessionEJB' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.user.Session_user.persistEntity(java.lang.Object)' in EJB 'SessionEJB' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'SessionEJB' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.bouton.Session_bouton.mergeEntity(java.lang.Object)' in EJB 'Session_bouton' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_bouton' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.bouton.Session_bouton.persistEntity(java.lang.Object)' in EJB 'Session_bouton' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_bouton' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.operation.Session_operation.mergeEntity(java.lang.Object)' in EJB 'Session_operation' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_operation' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Warning> <EJB> <BEA-012035> <The Remote interface method: 'public abstract java.lang.Object oracle.operation.Session_operation.persistEntity(java.lang.Object)' in EJB 'Session_operation' contains a parameter of type: 'java.lang.Object' which is not Serializable. Though the EJB 'Session_operation' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.user is deprecated, property javax.persistence.jdbc.user should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.driver is deprecated, property javax.persistence.jdbc.driver should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.url is deprecated, property javax.persistence.jdbc.url should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Notice> <EclipseLink> <BEA-2005000> <2010-10-14 09:14:29.656--ServerSession(42285779)--property eclipselink.jdbc.password is deprecated, property javax.persistence.jdbc.password should be used instead.>
<14 oct. 2010 09 h 14 GMT+01:00> <Error> <HTTP> <BEA-101371> <There was a failure when processing annotations for application C:\Users\Moshe\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\SAB_ADMIN\ModelWebApp.war. Please make sure that the annotations are valid. The error is oracle.adf.view.faces.webapp.ResourceServlet>
<14 oct. 2010 09 h 14 GMT+01:00> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1287044066833' for task '0'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'SAB_CRUD-Model-context-root''
weblogic.application.ModuleException: Failed to load webapp: 'SAB_CRUD-Model-context-root'
 at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:404)
 at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180)
 at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
 at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
 at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
 Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: oracle.adf.view.faces.webapp.ResourceServlet
 at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280)
 at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
 at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
 at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
 Truncated. see log file for complete stacktrace

This is the content of my web.xml file where i found the markup <servlet> and i tried to run without the first one but the error still like it was :
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>oracle.adf.view.faces.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
<description>Web Service MyConnexionServiceSoapHttpPort</description>
<display-name>Web Service MyConnexionServiceSoapHttpPort</display-name>
<servlet-name>MyConnexionServiceSoapHttpPort</servlet-name>
<servlet-class>oracle.controll.ConnexionBaseDeDonnees</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>ResultatRequetePort</servlet-name>
<servlet-class>oracle.controll.ResultatRequete</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>MyConnexionServiceSoapHttpPort</servlet-name>
<url-pattern>MyConnexionServiceSoapHttpPort</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ResultatRequetePort</servlet-name>
<url-pattern>/ResultatRequetePort</url-pattern>
</servlet-mapping>
Thanks...

What does this file be used for?

What does this file be used for: $COHERENCE_HOME/lib/coherence/coherence-client.xml ?
The contents of this file is show as the following:
?xml version='1.0'?>
<license-document>
<license>
 <software>Oracle Coherence: Data Client</software>
 <licensee>n/a</licensee>
 <type>production</type>
 <id>0x00A800CC0000011295888F24BC6C730B</id>
 <signature>302C02147737DBFAC8F3931DC9A50EFB78A9DF824414054B0214277CACA4CA2B3D01292FBEB080A18DDCC79DBF0F</signature>
</license>
</license-document>What is the difference between $COHERENCE_HOME/lib/coherence/ coherence-client.xml and
$COHERENCE_HOME/lib/coherence/ coherence-rtc.xml about the purpose of usage?
Edited by: junez on 30-Nov-2009 08:50

Hello Junez,
The coherence-client.xml is for the Data Client.
The coherence-rtc.xml is for the Real Time Client.
Please take a look at the following page for more information and let me know if you have anymore questions.
I am also curious what version of Coherence are you using?
Best regards
-Dave

Can XML files be used for data?

Similar Messages

Maybe you are looking for