Can you add memory to iMac 6.1?

Can you add memory to an iMac 6.1 (currently has 1 GB) and an MacBook Air (currently has 2GB) - 11 inch late 2010?

Yes,
Your year and model iMac can take 4 GBs max., but that model will only recognize only about 3.2-3.4 GBs of the total 4 GBs.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).

Similar Messages

Can you add memory to a IMac's graphics card?

I have a 2011 IMac with an AMD Radeon HD 6970M 1GB GDDR5, can I add another 1gb to it?

Greetings,
I have a 2011 IMac with an AMD Radeon HD 6970M 1GB GDDR5, can I add another 1gb to it?
The memory on the AMD Radeon HD 6970M is integrated into the graphics card. It cannot be removed / upgraded.
While not directly related, you can upgrade the RAM of your CPU if you like.
Cheers.

Can you purchase memory for iMac intel 2008

I want to add memory to my iMac (20 inch Early 2008) but apple store online says no memory available for this model. Is that it? Do I have to purchase a new computer to get more memory?

You will find memory modules for your computer at OWC and DataMem for less than Apple charges for memory. You don't have to buy a new computer for more memory. You can install:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-6400 (800MHz) DDR2 SO-DIMMs
The largest module you can install is 4 GBs.

Can you add memory to an iPad after purchase?

Can an IPad purchased with 16GB be bumped up later to 32GB?

You can't add RAM or storage capacity, or add 3/4G to a Wifi only iPad.
 Cheers, Tom

Can you add memory to a mac book

can memory be added to a mac book

It would help to know which one of the 9 different models of MacBook you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier and post it back here.

My iMac is 6 years old. It has recently become very slow. Can I add memory? Other suggestions?

My imac is 6 years old. It has recently become very slow (not internet related). Can I add memory to speed it up? Other suggestions?

rehereford wrote:
It is a 1.83 GHz Intel core 2 duo Memory: 2GB 667 mhz DDR2 5SDRAM. How do I find out how much RAM and toatl and free hard disc space?
Several ways. Open a Finder window & the info will be at the very bottom of the window frame. Also, if you open Disk Utility, click your hard drive, the info will be listed in DU. If your HD is shown on your desktop, click on it. Also, the info can be found inside the System Profiler.

How can i add memory to my mid 2007 IMAC

how can i add memory to my IMAC

You can have up to 6GB of memory for that model.
Many people on these forums speak well of the following memory suppliers.
In North America contact OWC …        Upgrade Apple iMac Memory
In Europe contact Crucial.com …       RAM Memory Upgrade
Both companies have facilities to guide you and will recommend the correct memory package to meet whatever needs you describe to them.
There may be benefits buying from whichever company has a branch in your own geographical location insofar as Shipping charges, Local sales taxes and Exchange rates. Check out the basic memory costs and do your sums.
Guide to required RAM.    Lookup Mac Specs By Serial Number, Order, Model & EMC Number, Model ID @ EveryMac.com

Can you add GHz to your MAC PRO??????

I want to buy an 8Core MAC PRO which consists of Two 3.2GHz Quad-Core Intel Xeon processors
Can you add a third Processor?? because with video editing Two 3.2 Ghz is not as much as one might think.. You can buy PCs with Four 3.0 Ghz for 1,000.00 less

So is two 3.2 Ghz going to be fast enough for editing?? I am doing a lot of chroma keying right now I have an imac 2.66 ghz and I am having to downsize all of my footage from my XH-A1 because it takes so long to render when it is in 108060i. So.. yeah just wondering if maybe someone could give me some pointers as far as what to buy right now like i said i am doing a lot of green screening and I want to be outputing with the full resolution of my xh-a1 without having to convert to 720
Sorry if none of this makes sense. -Nick

How can you add a 2nd i Tunes account on the same computer?

How can you add a 2nd i Tunes account to the same computer?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

Can you add fusion to refurbished

Can you add fusion to a refurbished.

Loo93 wrote:
Can you add fusion to a refurbished.
No.
Refurbished Macs are sold as-is, what is listed are the only configurations available.
If you want a fusion drive you will have to wait until one is listed or buy a new model.
What mende1 suggested is not possible.
The 2012 and 2013 iMacs cannot be opened without risk of serious damage to the screen (that will NOT be covered by warranty) and no SSD module is available for them even if you were willing to risk removing the screen.

I have an iMac5, 1 with dual core of 2 x 512 MB. Can I add memory to the original computer to take advantage of the new OSX Mavericks download?

I have an iMac5, 1, with a dual core of 2 X 512 MB RAM. Can I add memory to my original computer in order to take advantage of the recent OSX Mavericks download?

You can:
Maximum Memory
3.0 GB (4.0 GB can be installed, only 3.0 GB will be addressed)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
You will need to replace the modules you now have with one 2 and one 1 GB module or two 2 GB modules.
You cannot install anything higher than 10.75 Lion as your model is not able to run anything higher.
Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Be sure to check whether any of your applications will have to be upgraded or replaced..
App Compatibility Table - RoaringApps

Text editing - can you add text editing options on the 'in-browser editing'

Text editing - can you add text editing options on the 'in-browser editing' tool?

You can only replace existing content, not edit the page structure. Refer to the respective help sections.
Mylenium

How many devices can you add to icloud?

How many devices can you add to your icloud account?

How many devices can you add to your account?

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

I have an ipod touch and the contacts icon is missing. How can you add it to the home screen?

I can't find the contacts icon... How can you add this to the home screen

Every iPod touch has a contacts icon. It might be hiding. You can try Settings > General > Reset > Reset Home Screen Layout.

Can you add memory to iMac 6.1?

Similar Messages

Maybe you are looking for