Can you add routes to use ipsec0 interface on SRP521W?

I bought a couple of these to trial for location to remote telemedicine sites.  However I am only able to route one network range over the IPSec VPN.  I have to route multiple network ranges, and I am not able to make any modifications to the static routes for the ipsec0 interface, only WAN1 and LAN1.  Ideally, I would change the default route to use ipsec0.  But if that isn't an option, then just add specific ranges. 
Can anyone help with this?
Thanks,
Jim

That sucks.  I have never used a GRE tunnel before, I tried yesterday building one to my Nexus 7010 with no success.  It seems like it would be so easy if I could just get the option to select the ipsec0 interface when adding static routes.
Can you recommend the next step router or firewall I could use to be able to send all traffic over the VPN, or at least add additional routes or network lists to send over the VPN?  I am assuming the ASA 5505 would work perfectly, but I was hoping for a more budget concious option as we'll have these all over town.
Otherwise, if anyone can give me tips or suggestions on how to build the GRE tunnel from the SRP521W to a Nexus 7010 that would be great.
Thanks,
Jim

Similar Messages

  • How large of an Ethernet Switch can you add to an Airport Extreme gigabit router?

    I have a gigabit Airport Extreme router. I like using the Airport Utility to control my network. I want to convert a large number of wireless connections to wired ethernet devices, about 24. The reason is that I just get too many wireless dropouts, and I need a more reliable network. I am looking for the best way to design this. It seems like adding a gigabit Ethernet switch is the easiset and best way to accomplish this. My questions are:
    1. How large of a gigabit switch can you add to the LAN port of an Airport Extreme: 24-port, 48-port?
    2. How far down can you cascade switches? In other words, can I connect three 5-port switches (level 1 switches) to the three LAN ports on the Airport Extreme, and then connect more 5-port switches to the level 1 switches?
    3. What are the performance implications for either design. Can you achieve gigabit performance with these designs?
    Thanks for the help.

    I have a network with an Extreme base station, 3 Extreme wired extenders and 1 express wired extender - in the mix are four 24 port gigabit switches and two 8 port gigabit switches - so you can add as much as you want within the limits of the internal IP address range which is controling the number of devices on the network.

  • How can you add a where clause using "OR" with applied ViewCriteria?

    [JDeveloper 10.1.3 SU4]
    [JHeadstart 10.1.3 build 78]
    I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
    "I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
    So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
    I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
    Toine"
    Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
    To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
    Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
    Thanks,
    Sandra Muller
    JHeadstart Team
    Oracle Consulting"
    Anyone knowing the answer or am I asking for an enhancement?
    Toine

    Hi,
    Can you SET your whereclause as follows ?
    ('Y' = <isAnd>
    and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
    OR ('N' = <isAnd>
    AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
    )

  • Can you add an external DVR if your using a Verizon box without the DVR built in.

    Can you add an external DVR if your using a Verizon box without the DVR built in?
    Or you can only add an external DVR ir you Verizon box has the DVR build in?
    Thanks

    You can connect an external DVR to the verizon equipment, but it will be limited as far as what it can do. You will not have the full functionality as you would by using a Verizon DVR. To get more information as far as what will and will not work, please contact the tech support group of the external DVR company.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • When using the "submit by email" feature can you add 2 emails?

    When using the "submit by email" feature can you add 2 emails?

    Yes. Seperate them with semicolon (;) just like you would in a normal email client.
    Kyle

  • Confgiure router to use particular interface IP add.for TACACS+ authenticat

    How to confgiure router to use particular interface's IP address for all comunications with ACS server for TACACS+ authentication.
    Thanks a lot...

    Use the command:
    ip tacacs source-interface

  • Can you add apps to iPad open in list

    Can you add apps to the open in list of an iPad

    As far as I know, you cannot add apps to the Open In list using any setting or built in feature in iOS. This is controlled by the iOS itself. IIRC, you can delete apps from the iPad that appear in the Open In list in order to make room for apps that you would like to appear in there, and if you continue to use the apps that you want to add to that list, eventually they will appear in the list. I believe that the more that you use one particular app, the more likely it will be for it to appear in the Open In list.

  • Can you add vids from a camra to Ipad

    Can you add vids from camra to ipad 2 (to make vids on imovie)

    surely. You need to sync the files to your camera-roll in iOS, use itunes/iphoto. IMovie in iOS can access all videos that are in the camera-roll ( photos.app ) .
    The Apple iPad camera connection kit will also be a big help  : With it you can insert a digital cameras SD-Card into the iPad and mass-import the footage . Using this you avoid the iTunes/PC/OSX procedure to load material into the ipad.

  • Can you add cut copy and paste icons to mail toolbar?

    Can you add a cut, copy and paste icons to the mail toolbar in macmail?

    I guess that these were considered such fundamental operations, each with an already existing variety of operations (mouse, keyboard, right-click, ctrl+c etc) that the Thunderbird devs didn't choose to replicate them again. Similarly, keyboard selection is relied upon a great deal in Thunderbird, rather than adding all the ugly (IMHO) checkboxes that now counterintuitively litter all Windows Explorer displays.
    So, if the devs expected you to use ctrl+right+shift to select the current text word by word, then ctrl+c to copy it, ctrl+x to cut it and ctrl+v to paste it would be quite natural, since your hands are already at the keyboard. Similarly, if you prefer to select by mouse, a right-click also offers options to copy, cut and paste, and there is also the possibility to drag selected text, serving cut and paste in one action. So it could be argued that there is no need for buttons.
    There used to be additional button add-ons for Thunderbird, but those that I know about don't appear to be under active maintenance and don't currently work with TB 31.0.
    You could build your own using a Custom Buttons add-on, but it isn't easy to find the appropriate function call to attach to your home-made buttons. :-(
    https://addons.mozilla.org/en-US/thunderbird/addon/custom-buttons/
    Here's the code you need if you try this add-on:
    cut: goDoCommand("cmd_cut")
    copy: goDoCommand("cmd_copy")
    paste: goDoCommand("cmd_paste")
    (taken from: http://kb.mozillazine.org/Keyconfig_extension:_Thunderbird )
    The tedious bit is finding suitable icons; the defaults are pretty but unhelpful coloured stars.

  • Can you add multiple soundtracks to a Keynote show?

    I know you can add one but can you add several? How?

    Yes it is but I hit a glitch, they tell me to use the QuickTime inspector to create a sound for one slide only. Once you click the QuickTime icon the second command is " Click the movie or sound object to select it" I am assuming they are telling me to select the sound file, and drag it into the audio box in the inspector,,...when I go back to the QuickTime icon the controls are still grey,..what am I doing wrong,..the wording of these things leaves a lot to be desired,....if you try to select it while in the QuickTime filed the field dissappears,...confusing....

  • Can you add the entire content of your desktop to the allowable locations in flash player?

    can you add the entire content of desktop to the allowable locations in flash player?  when i click 'add' to allowable locations and type in file:///C:/Documents and Settings under website (i know it's not the website but where else would it be added) it doesn't show up in the overall list of allowable 'sites'.

    Hi radwh,
    Are you talking about trying to add your desktop to Flash Player's trusted locations? If so, you use the "Advanced" tab on the Local Settings Manager to designate folders and files as trusted. (Full path is Advanced->Developer Tools->Trusted Location Settings.) Here's a link to the documentation for that: http://help.adobe.com/en_US/FlashPlayer/LSM/WS6aa5ec234ff3f285139dc56112e3786b68c-7ff0.htm l .
    Hope this helps, and get back to me with further details if this is not what you were asking.
    Thanks,
    KALTechWriter

  • HT5649 how can you add a previous playlist from a different apple Id  both belong to the same person

    how can you add a previous playlist form a different apple ID, both belong to the same person

    It's ok to share the same AppleID for iTunes.  Use Separate ID's for iCloud, iMessage, and Facetime. 

  • Can you add hyperlinks to the images created in the slideshow on the command menu?

    can you add hyperlinks to the images in the slideshow created
    from the command menu? thanks

    On 30 Aug 2008 in macromedia.fireworks, mediastream13 wrote:
    > can you add hyperlinks to the images in the slideshow
    created from
    > the command menu?
    Unfortunately, those slideshows aren't all that flexible. I
    don't think
    that Adobe supplies the source for the Flash slideshows. But
    if you use
    the spry slideshow, you should be able to edit the HTML in
    Dreamweaver to
    add links.
    Have a look at one of Project Seven's graphics presentation
    products -
    Lightshow Magic, Slide Show Magic or Image Gallery Magic.
    They're $95
    each, and extremely flexible in what you can do with them.
    http://projectseven.com/
    Joe Makowiec
    http://makowiec.net/
    Email:
    http://makowiec.net/contact.php

  • Can you add things to the Firefox button menu?

    Regarding the orange Firefox menu button--can you add things to it? I want to add the zoom option to that menu. I an add the + and - zoom buttons to the toolbar, but I want the zoom option in the orange Firefox button menu itself instead. Is that possible?

    Have you considered using the keyboard commands for Zoom? <br />
    https://support.mozilla.org/en-US/kb/font-size-and-zoom-increase-size-of-web-pages
    Or use '''{Alt}''' to show the Menu bar - then hit '''{V}'''for the View menu - then '''{Z}'''for Zoom - then use '''{I}''' to zoom in or '''{O}''' to zoom out from the keyboard.
    Adding menu items isn't easy, plus the internal commands for the new menu item would need to be coded. You would either have to locate an extension which adds those menu items or learn how to create an extension that has that feature.

  • Can you add batch video transition in adobe premiere cs5.5?

    can you add batch video transition in adobe premiere cs5.5?
    i want to make a slide show with my pictures and i dont want to add fade in/out 400 times so is there any batch transition or one click fade in/out or at least something like that?

    Use:
    1. Automate to sequence and select the transition you want, or
    2. Apply the transition in the timeline, copy, select the rest of the clips and paste attributes.

Maybe you are looking for