Can you apply two video effects to the same video clip?

I have been trying to add 'sepia tone' to a clip that I have already applied 'aged film' to.
It won't work.
Anyone get any tips?

.. Anyone get any tips? ..
does work here..
is your project located on some ext. harddrive?
is your clip part of a loooong import?

Similar Messages

  • Can you have two itunes accounts on the same computer?

    Can you have two itunes accounts on the same computer and if so how do you access them without syncing each others music?

    Yes. Use separate iTunes libraries(launch iTunes with the Shift(Windows) or Option(Mac OS X) key held down as needed), or different user accounts on the computer.
    (100648)

  • Can you synch two itunes accounts on the same computer?

    can you synch two itunes accounts on the same computer?

    pflip wrote:
    can you synch two itunes accounts on the same computer?
    What do you mean by, "synch two itunes accounts"? You don't sync iTunes accounts.
    WHat are yoru trying to accomplish?
    iTunes account= Used to make iTunes purchases.
    iTunes library = All your media and what you see when you open iTunes.

  • HT204380 Can you FaceTime two different people at the same time?

    Can you FaceTime two different people at the same time?

    No, not at this time. Feedback to Apple goes HERE, and click on the appropriate section.

  • Can you have two Enterprise CA on the same AD Domain at the same time

    Hello
    Can someone please help me with the following question
    If I have a Windows 2003 R2 Enterprise Root CA on the AD Domain can I also Add a separate Windows 2012 R2 Enterprise Root CA to the same domain.
    We do not use Autoenrollment on the existing 2003 R2 CA.
    Network guys want to introduce a Cisco BYOD (Bring Your Own Devise) solution using Cisco ISE (Identity Services Engine) which uses SCEP/NDES and therefore need certificates from CA. The thing is the ISE recommend 2008 AD CS as a minimum
    Therefore I wonder if Installing a 2012 R2 Root CA that only provides certificates via the NDES/ISE solution would be a possibility. 
    I understand the Root CA Cert is held in a container under the 'Configuration' partition in Active Directory. Therefore can you have Two Root CA certs in the AD container at the same time for the same AD Domain/Forest?
    The idea would then be to migrate other services to the new CA and phase out the old 2003 R2 CA over time.
    Thanks All
    AAnotherUser__
    AAnotherUser__

    On Thu, 18 Sep 2014 09:18:43 +0000, AAnotherUser wrote:
    Therefore can you have Two Root CA certs in the AD container at the same time for the same AD Domain/Forest?
    Yes.
    Paul Adare - FIM CM MVP
    You are trapped in a maze of screens and ssh sessions all alike.
    It is dark, and you are likely to log off the wrong account. -- Nep

  • Can you put two iTunes libraries on the same computer? what is the best way?

    Is it possible to put two iTunes libraries on the same computer?  What is the best way to do it so the two libraries are not connected?

    MSGTN wrote:
    Is it possible to put two iTunes libraries on the same computer?
    yes.
    What is the best way to do it so the two libraries are not connected?
    give them distinct names. launch iTunes while holding the option (⌥) key, click on choose library when prompted, and select the iTunes folder of the desired library.
    FWIW, there are 3rd party apps that help with managing multiple libraries, notably:
    PowerTunes
    iTunes Library Manager

  • Can you use two iPod's on the same computer?

    I currently have an iPod Video, and my mother wants to get a shuffle or nano. The problem is, we only have one computer that will let iTunes run. Is it possible to use two iPods on the same computer, or even with the same iTunes?

    See these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
    Multiple iPod installations.
    How to use multiple iPods with one computer.
    If you have the latest iTunes, an easy way to create a new library is to hold down the 'alt' key whilst opening iTunes (for Macs), or hold down the 'shift' key (for Windows).
    This will give you the option of either using the current iTunes library or creating a new one.
    There are various methods of transferring different songs to different iPods with a single iTunes library.
    One is to manage the songs manually.
    With this setting, you can drag and drop songs/playlists etc onto the iPod from iTunes, and also delete and/or edit songs which are currently on the iPod without affecting the iTunes library.
    If you wish to keep the convenience of automatic sync, then you could set the iPods to sync with "selected playlists". This setting can be found in the iPod summary screen under the 'music' tab. With this setting, different playlists can be transferred and later deleted from each iPod without affecting any playlists stored in iTunes or the playlists on the other iPods.
    Also, on the 'summary' main page you will see the option to "only sync checked items". With this setting selected, if you remove the check marks from any songs in iTunes, they will not be transferred to the iPod. You can restore the check mark if you want to put the songs back on the iPod at a later date.
    Be aware that when playing songs in iTunes, any songs that do not have a check mark against them will be skipped over and will not be played.

  • Can you sync two i phones to the same laptop?

    My partner already has an i phone 4 that i have set up and used my laptop for. Ive just recieved my i phone today and want to synchronize my details. the first sync i did i got his contacts etc. How do i change it to sync all my info instead?? Any help would be greatfully recieved :-)

    My suggestion would be to create two login accounts on your computer, that way you can keep contacts seperate. You will still be able to share the same iTunes login if you want to.

  • Can you have two iTunes accounts on the same desktop PC?

    I have an iPad 3 and my wife has an iPad 2 from her work. We have a desktop PC which we wish to use to sync the iPads to. We have separate user accounts on the PC. Can we have separate iTunes accounts on the PC?  We will we be able to share music, pictures, etc.?

    Yes. Use separate iTunes libraries(launch iTunes with the Shift(Windows) or Option(Mac OS X) key held down as needed), or different user accounts on the computer.
    (100648)

  • HT1451 Can you have two seperate libraries on the same computer? How can you do that?

    My family uses the same computer but I like different music. How can I create a seperate library for me to sync to?

    Launch iTunes with the Shift key(Windows) or Option key(Mac OS X) held down, or use a different user account.
    (66145)

  • Can you use two tax classes in the same payroll run?

    Hi,
    I have a wage type that is currently set to Tax Class 1 (fully taxed) for processing class 71,  I need to change it to tax class 7 (Withholding and SUI only) and have it computed as part of the regular payroll run and also by itself using offcycle.
    When I have it set as Tax Class 1, all is well, when I change it to tax class 7, I get the error...
    BSI Messages and Status 4101 CAN NOT PROCESS DUPLICATE RESIDENT STATE FED
    This is the first time we're using this tax class and I think i have it set up correctly in the tax model but am not for sure.
    Any suggestions?   I'd really appreciate some guidance as I've looked
    Thanks!
    Stephanie Abrahamson

    I think you should not change the PRCL 71 from 1 to 7 wide open. Start it with begin date of pay period you want and keep the history with PRCL 71 1.
    As well check the config of tax model.
    Arti

  • But can you have two libraries open at the same time?

    I have a few libraries stored externally, that I don't acceess much as they have older images, and my main current library. I was wondering whether, with the new management scheme, it would recognize the external libraries as source images, linked to my main library, so that when I'm connected to the external drive, they appear in my main library, fully editable, but when the external is offline, they appear as linked offline previews.
    In other words, will the other libraries be suitable as "other" source folders?
    Mark

    I have a few libraries stored externally, that I
    don't acceess much as they have older images, and my
    main current library. I was wondering whether, with
    the new management scheme, it would recognize the
    external libraries as source images, linked to my
    main library, so that when I'm connected to the
    external drive, they appear in my main library, fully
    editable, but when the external is offline, they
    appear as linked offline previews.
    In other words, will the other libraries be suitable
    as "other" source folders?
    I don't know if it would quite work like that, but you could import all the projects from those other libraries, then use the new tools to move the master files back to those external drives. Then you would essentially have what you were looking for, which is one central library with some master images held offline in case you needed them later.

  • Can you have two slides shows on the one interactive page?

    I'm just new at learning interactive pdfs in indesign so sorry if this is common knowledge. I know how to create a slide show on a page, but can you have two slide shows on the one page or more for that matter? (Ideally I need 3.) Each slide show has its own set of images and buttons.

    Just :http://www.youtube.com/watch?v=Dm0aeMUPZ4U
    But I'm happy to create them a different way if needed be.

  • Can you apply a pathfinder effect to a mesh object

    can you apply a pathfinder effect to a mesh object

    You can apply it, but it might not make too much sense.

  • Can you have two detail lists from the basic list at the same time?

    Hi
    Can you have two detail lists from the basic list at the same time?
    If yes how and if no why?
    Thanks
    Venkat

    No   ... it is not   possible   of   2 detail  list at   one time   from the basic  list ...
    you can  increament   the SY-LSIND  .... But you can not   display  both the windows   at single time  ...
    it is  possible  to  display  2 Detail list  in ALV   ......  from one  basic  list   using  the  Blocked  list  concept    .
    Sample Program on BLOCK LISTS
    Report   zblock_list
    * Declarations for BLOCK ALV DISPLAY
    *--type pools
    TYPE-POOLS:slis.
    DATA:x_layout TYPE slis_layout_alv,
    t_field TYPE slis_t_fieldcat_alv,
    *--field catalog
    x_fldcat LIKE LINE OF t_field,
    *--to hold all the events
    t_events TYPE slis_t_event,
    x_events TYPE slis_alv_event,
    t_sort TYPE slis_t_sortinfo_alv,
    x_sort LIKE LINE OF t_sort ,
    *--Print Layout
    x_print_layout TYPE slis_print_alv.
    *----Macro to add field catalog.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    DEFINE add_catalog.
    clear x_fldcat.
    x_fldcat-fieldname = &1.
    x_fldcat-seltext_m = &2.
    x_fldcat-outputlen = &3.
    x_fldcat-tech = &4.
    x_fldcat-col_pos = &5.
    x_fldcat-no_zero = 'X'.
    x_fldcat-ddictxt = 'M'.
    x_fldcat-datatype = &6.
    x_fldcat-ddic_outputlen = &7.
    if &6 = 'N'.
    x_fldcat-lzero = 'X'.
    endif.
    *--build field catalog
    append x_fldcat to t_field.
    END-OF-DEFINITION.
    *----- data declerations.
    data: v_repid like sy-repid.
    data: begin of itab occurs 0,
    matnr like mara-matnr,
    ernam like mara-ernam,
    meins like mara-meins,
    end of itab.
    data: begin of jtab occurs 0,
    matnr like makt-matnr,
    maktx like makt-maktx,
    end of jtab.
    select matnr ernam meins
    up to 20 rows
    from mara
    into table itab.
    select matnr maktx
    up to 20 rows
    from makt
    into table jtab.
    v_repid = sy-repid.
    *DISPLAY alv
    * Initialize Block
    call function 'REUSE_ALV_BLOCK_LIST_INIT'
    exporting
    i_callback_program = v_repid.
    *Block 1:
    *INITIALIZE
    refresh t_field. clear t_field.
    refresh t_events.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    add_catalog:
    'MATNR' 'Material' '18' '' '1' 'C' '18',
    'ERNAM' 'Created By' '12' '' '2' 'C' '12',
    'MEINS' 'Unit' '5' '' '3' 'C' '3'.
    *--build table for events.
    x_events-form = 'TOP_OF_LIST1'.
    x_events-name = slis_ev_top_of_list.
    append x_events to t_events.
    call function 'REUSE_ALV_BLOCK_LIST_APPEND'
    exporting
    is_layout = x_layout
    it_fieldcat = t_field
    i_tabname = 'ITAB'
    it_events = t_events
    it_sort = t_sort
    tables
    t_outtab = itab
    exceptions
    program_error = 1
    maximum_of_appends_reached = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    *--BLOCK 2(SUMMARY REPORT)
    *INITIALIZE
    refresh t_field. clear t_field.
    refresh t_events.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    add_catalog:
    'MATNR' 'Material' '20' '' '1' 'C' '18',
    'MAKTX' 'Description' '40' '' '2' 'C' '40'.
    *--build table for events.
    x_events-form = 'TOP_OF_LIST2'.
    x_events-name = slis_ev_top_of_list.
    append x_events to t_events.
    * Append table block.
    call function 'REUSE_ALV_BLOCK_LIST_APPEND'
    exporting
    is_layout = x_layout
    it_fieldcat = t_field
    i_tabname = 'JTAB'
    it_events = t_events
    tables
    t_outtab = jtab
    exceptions
    program_error = 1
    maximum_of_appends_reached = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    *--CALL FM TO DISPLAY THE BLOCK REPORT.
    call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    * exporting
    * is_print = x_print_layout
    exceptions
    program_error = 1
    others = 2.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    form top_of_list1.
    skip 1.
    write: 10 'List 1',
    /5 '--------------------'.
    skip 1.
    format reset.
    endform.
    form top_of_list2.
    skip 1.
    write: 10 'List 2',
    /5 '--------------------'.
    skip 1.
    format reset.
    endform.
    reward  points if it is  usefull ....
    Girish

Maybe you are looking for