Can you attach an external HD to the new iMac with a fusion drive?

I'm trying to decide how to configure the new iMac I am going to buy. Can you attach an external HD to an iMac with a fusion drive?  I'm assuming it would be fine, but since the fusion drive is new, I don't want a nasty surprise.   Some of the new Mac Minis now have fusion drives, so has anyone added an external drive to it?

This was a concern expressed in this thread: Worrying reply to Apples FAQ on new Fusion Drive
However, Apple has since amended the FAQ, clarifying their earlier Fusion confusion.
Therefore I believe the answer is yes, you can add an external USB HD. If Apple would only state that explicitly in this document, it would eliminate all doubt.

Similar Messages

  • I just bought the new IMAC with the Fusion Drive 3t. Can I use the Bootcamp systemwith it? If not what do you suggest? I relly need the bootcamp for quicken

    Good morning,
    I just bought the new IMAC with the Fusion drive 3T. Can I use it with bootcamp beacuse I need for Quicken?If not any suugestion?

    You can't use Boot Camp in 3 TB drives. You can download VirtualBox, Parallels or VMware Fusion and install Windows on a virtual machine. See > https://discussions.apple.com/docs/DOC-3321

  • Can i change my old ipod to the new one with priceless

    I have an ipod, they said ipod touch 3 8gb, they said... Now i can't do anything with this because too many apps require IOS >4.2.1
    So i have a question: Can i change my old ipod to the new one with priceless.
    Thanks for reading
    p/s: im living in San Francisco now

    CookPu wrote:
    If you know, please answer my question
    TFR
    Wow! Give us a chance!
    I live in the UK (about five minutes drive from the Olympic cycle race route. Didn't you notice me waving to the cameras? ). Not far from you , but far enough away that I might be doing something else, even if the cycle race has finished. The same applies to everyone else too. I'm eight hours ahead of you, so if it's 9pm now, where you are, it's five in the morning where I am and most of us here will still be inspecting the inside of our eyelids!
    Now, about your problem.
    If your iPod is 8GB, then it is not a 3rd generation Touch - no matter who they are and no matter who said it was! If it has model number A1288 etched into the casing on the back, then that identifies the 2nd gen Touch. (Yes, there is a 4th gen Touch in 8Gb capacity, but still no 8GB 3rd gen - ever). The third generation is model No. A1318.
    Can i change my old ipod to the new one with priceless. I don't understand what that means, unless you mean "with the price difference". In which case, the answer is "no".
    Even more confusing is; Now i can't do anything with this because too many apps require IOS >4.2.1 because -
    a 2nd generation Touch (including the 8GB) can install iOS 4.2.1 But that's as high as it can go. So that's incorrect! 
    you can still use any App that doesn't require a higher iOS than you have. So still incorrect!
    you can still use it as a music player, so guess what, wrong again!
    ... to store your photos - you know what I'm going to say now, don't you?
    ... and play those videos!
    So wrong, wrong and wrong!
    Message was edited by: the fiend

  • The new iMac has no cd drive so how do I download software that I have?

    The new iMac has no cd drive so how do I download software that I have? I have adobe photoshop elements 11 and baboo drawing pad and they both have CDs to install.

    Welcome to the Apple Support Communities
    The new iMac hasn't got a SuperDrive to insert CDs and DVDs, so you can't install software from CDs and DVDs.
    Instead, you have different ways to install the applications you have on DVDs:
    1. Buy any external optical drive for your Mac and use it to install your applications.
    2. If you have another PC or Mac, you can save the external optical drive cost and use Remote Disc > http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US Note that this may be a bit slow

  • Is there a way to instal Final cut studio 2 in the new iMac with Lion?

    My new iMac arrived with pre installed Os x Lion. When tried to instal FCS2 it gives me error that it can't open it because PowerPC apps are no longer supported. Geniuses . I'm wandering, since I can't downgrade to snow leopard, is there a way around this. Can I buy the snow leopard, instal only the Roseta , instal FCS2 and then uninstall the Roseta?
    Has any of you encounter this problem?
    Are the new iMacs exclusively done to run with Lion?

    You will need to install Snow Leopard in order to be able to run the FCS 2 Installer since it requires Rosetta. Note however, that the applications do not require Rosetta (they are UB). So after having installed FCS you could now upgrade to Lion if you want .... but upgrading the OS over an installed version of FCS is not recommended practice.
    Personally, I'd just get a copy of Snow Leopard and stick with that .... or get FCS 3 (and stick with Snow Leopard).
    mish

  • IPhoto can't find server volume after migration to new iMac with 2 HDs

    Hi all,
    I recently moved to a new iMac from an older Mac Pro. The new iMac has 2 hard drives (256GB SSD & 2TB HD) with all the programs installed on the SSD and the HD is used as the main file storage drive. iPhoto is installed on the SDD and its library of pictures are on the HD. My latest photo imports are working fine but the older pictures can't be properly opened, I get the following warning everytime I double click on a thumbnail:
    Clicking on "Cancel" gets the following responce:
    When I look at the info of the premigration thumbnails it says the pictures are located on the correct HD. The new pictures also show them as being in the same location but I'm having no problem opening the post migration pictures.
    I'm thinking about trying out Aperature but want to get this linking problem sorted out first.
    Any ideas how I should go about relinking "thousands" of pictures..?

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management. 

  • How can I install Photoshop CS5 on a new iMac with no disc drive

    How can I install Photoshop CS5 on a new iMac with no disc drive?

    Hi,
    Please copy this Link http://trials2.adobe.com/AdobeProducts/PHSP/12/osx10/Photoshop_12_LS1.dmg?PID=2159997
    Now open Adobe.com and go to Products Trials. Click on Acrobat Try now and once the download page appears then paste the above mentioned link in the address bar and then press Enter. Download should start immediately.
    Please let me know if it helps.
    regards,
    Abhijit

  • When support After Effects Ray-traced 3D the GPU of the new iMac with retina display (GPU: AMD Radeon R9 M295X 4GB)?

    I would like to know whether After Effects CC Ray-traced 3D support the GPU of the new iMac with retina display.

    It never will. This is nVidia-exclusive technology and the whole things is deprecated, anyway. You better learn to use Cineware, buy a 3D program like Pro Animator or Element 3D or learn a proper 3D program.
    Mylenium

  • I have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

    i have the new iMac with OS X 10.8.3 i want to conner it with apple remote control i don't know how

    I have a Mac Book Pro 2008
    I have my MBP paired with Apple TV  and use it all the time
    My only complaint is that when I use the Apple TV remote it sometimes turns things off and on in iTunes.
    Besides all the options from Apple TV I can listen to anything on my mac over my TV surround system thru Apple TV

  • I'm using the note taking view of Word 2011 for Mac so I can record a meeting as well as take notes. The audio of the internal microphone is so low - can I attach an external mic and have it work with note taking view?

    Can I attach an external mic to my Macbook Air to enhance sound input for the note taking view of Word 2011 for Mac? I've tried preferences to up the volume of my sound, but I still cannot hear the recording. Any suggestions? I need to record a meeting as well as take notes so I'd like to use this tool, but the audio is not good enough.

    A USB microphone can work with the Air, and I've used them before with my 11" Air.  Griffin also made a product (the iMic) that will add a standard computer microphone port, connecting to your USB port.  It's heyday was the time of the old iBook laptops (which also lacked a microphone in jack) but I think it's still around.
    The single sound port on the 2011 models, as I recall, supports iPhone style headphone/microphone but I don't believe it will support a standard microphone input. 
    The built in microphone sits on the left side of the computer and I suspect wouldn't work well for picking up a lecture unless you were sitting just right in position vs. the speaker (preferably having the speaker positioned to the left and sitting really close).  By design most laptop microphones presume they are going to be mainly used to record a sound coming from the person sitting at the keyboard, while for a lecture you normally would prefer it concentrate on sound coming from behind the screen.

  • Can you use the new iMac with FCS.

    This is one of those a friend of a friend of a friend told me this.  His friend, who shoots video that's shown on a local access channel, just bought the latest iMac.  I don't know what this person's set up is or what kind of equipment is, but he claims that he might have to upgrade his cameras because he can't import the footage.  I'm interested in investing in the new iMac but hesitate because I do a lot of amateur video work (weddings, birthday parties, etc.)  Anyone heard anything about this?  By the way, I use a two year old HD Sony video camera and use FCS 7.  All video is stored on an external hard drive.

    The current 27" iMac's with Thunderbolt will run the whole suite of Final Cut Studio apps just fine.  The catch will be your external Scratch Drive.  Until Thunderbolt drives ship in a couple of months, you're stuck with FW800, which barely cuts it for serious HD work.  Thunderbolt will change that.
    One option is to get the configuration that has both an SSD and a 1TB 7200rpm HDD drives in it.  The SSD would be your OS drive, the HDD your Scratch Drive.  That would work fine.
    As for professionals, I teach them, guys from huge cable news networks, who've been using FCP since v.1.  I'm amazed how many of them walk away even after the 1st day of class with whole new workflows.  You never stop learning in any profession.  The day you do, you're out dated.
    The model of Mac you use has nothing to do with your ability to import footage.  The version of FCP you use CAN affect that a great deal, though.
    Specifically what make/model camera do you plan to be using for this work?  BTW, weddings and events are a very profitable niche profession.  I have friends who make good livings for years doing only that.

  • Can blue-ray disks be played on the new iMac?

    If I buy disks in blue ray format, can they be played on the new iMac?

    Matt Clifton wrote:
    No - you cannot play Blu-Ray movies on Mac OS X. You can, however, play them from within Windows if you have a Windows installation.
    Matt
    I don't believe the internal DVD drive that comes with the iMac is capable of playing a Blu-Ray disc, period, Windows or otherwise. It would require an external Blu-Ray drive AND Windows. Not exactly cost effective when a stand alone player costs about $100 these days.
    Message was edited by: lkrupp

  • I changed the captions for my family photos to include names, but when I exported the photos to make DVD's for family members, the old captions were there and not the new ones. How can I make a DVD to include the new captions with names?

    I have labeled old family photos with names that I would like to share at a family reunion via DVD. When I export the photos to make the DVD, the old photo labels are back rather than the new labels with names. Can I export the photos with the new titles?

    iPhoto shows you these Titles but the Finder shows you Filenames
    If you export (File -> Export) you'll get the Export dialogue. Note the option at FileName to use the Title as filename for the exported photo

  • How can i get that wallpaper picture in the new imac ad

    The new Imac ad has this AMAZING picture of a multi-colored flower as it's wallpaper (maybe).  Is that picture downloadable from Apple or is it part of an app/

    The best I could suggest is this.  It's close to what you're looking for, but not exactly:
    Go to http://www.apple.com/imac/design/
    Click "View the Gallery" near the top.  Go to the fourth picture in the gallery.  Control click, and select "Use as Desktop Picture" if you like it.

  • Can I plug an iPad Mini into the new iMac monitor?

    Can I plug (or use a switch) my iPad Mini into the new iMac 'monitor' so I can keep my new iMac  pristine and not migrate over all the 'stuff'?

    angcat,
    Mobile devices cannot be backed up directly to the Airport Time Capsule.
    The iTunes program on the computer is required for backup.

Maybe you are looking for

  • User exit at billing and sales document level

    Hi, Like we use a quantity contract through that we create resource related billing order and thn do the billing of that order but in the resource related billing order user enters the data manually which can exceeds the quantity of the contract. Now

  • JSF + Ajax4JSF Error

    Hi, I used Ajax4JSF components in my JSF JSP page. Some times the users are getting the following error when they are accessing the components related to Ajax4JSF. They are getting the error on a pop-up window and the error is: Request Error, Status

  • Can't play xvid video files on my macbook-need help with this

    I have tried everything, from Perian installation, to niceplayer, divx player, vlc player, divx and xvid codecs for QT....nothing seems to work, to allow me to play xvid video files....unless I buy a converting software and spend thousands of hours c

  • C:\Windows\system32\Macromed\Flash\Flash10d.ocx

    Can someone please, please help??? I installed FP10 on Windows Vista & says it's complete (shows the "F" icon flipping around & all).  But, when I try to open C:\Windows\system32\Macromed\Flash\Flash10d.ocx in my "C Drive", I keep getting a pop up wi

  • HT1925 i have delete whatsapp by mistake and now the new version is not compatible with my iphone, how can i take it back again ?

    Hello i need help, i unloaded the new version of whatsapp and now is not working because my phone is not compatible, i delete it, and now i can not unloaded it again ! how can i unload the old version again ? thanks