Can you boot off of your Macbook Pro hard drive from an iMac?
I have a Macbook Pro (Mid 2010) and a new iMac. Can I somehow use the iMac to boot off of my Macbooks hard drive?
I'm trying to run OSX off of my Macbook hard drive on my iMac. I want to target my Macbooks hard drive.
Similar Messages
-
I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks
And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all. -
Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it up fully before you can use it. I do not want to damage the laptop by misusing the battery.
Attach the charger and start charging the battery to 100%. The good news is that after you have connected the charger, you may start using the MBP as well.
Ciao. -
What RAID Setup do you use for your Macbook Pro Scratch Drive?
Is there any benefit to using an Express-ESata Raid Enclosure vs a single esata drive as the scratch drive?
If so, is there any benefit to using a 4 drive Raid 0 vs a 2 drive raid 0?
What Raid setups are any of you all using with your MacBook Pro's? Is there a significant performance difference between using a E-Sata drive and a FW800 drive. Is RAID the right way to go?
Sorry I'm not making a lot of sense right now, but I've searched through 20 or so pages of the forum and didn't see that anyone had addressed this question yet.OK, just to give you a frame of reference, I just performed the following tests -
I hooked up my Sony AVCHD camera to my Mac Book Pro 2.4 ghz with 4 GB ram - (pretty close configuration to yours) - and imported a 26 second clip into FCP 7 with the following drive configurations:
Capture to internal Mac Drive, no externals: 26 Second clip takes 44 seconds
Capture to external WD USB2 drive: 26 Second clip takes 44 Seconds
Capture to external CalDigit 2 Sata Drive Array, Raid 0, via Firewire 800: 26 Second clip takes 42 seconds
OK, so now I move the camera over to my Mac Pro 8-Core, 2 x 3.2 Ghz Quad Core Xeon with 14 gigs of ram, and capture *to the same external CalDigit 2 Sata Drive Array,* Raid 0, via Firewire 800: 26 Second clip takes 11 seconds
My conclusion would be the drives and drive throughput is not as consequential as the CPU horsepower in doing the conversion from AVCHD to Pro Res. However, there are many very knowledgeable people who look at these threads, and I would be interested to hear what they have to say.
Hope this helps.
Message was edited by: Meg The Dog to correct typo -
How can you redo initial system setup macbook pro
How can you redo initial system setup macbook pro?
Like when Setup Assistant fires up and lets you migrate? In general, that would imply having to do a complete reinstall. And I've always been under the impression that when you do that, the reinstall software does not contain all the extra goodies that come with a new from-factory install (such as iLife).
But as Prof. Kappy wants to know, the specifics are very version dependent. -
Can you get emoji on the macbook pro?
can you get emoji on the macbook pro? somebody please help me.
All you need to do is google:
http://forums.macrumors.com/showthread.php?t=608694
http://download.cnet.com/Emoji/3000-2094_4-10909915.html
and more... -
I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.
How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507
-
Can I Replace my Early 2009 Mac Mini Hard Drive with my Early 2011 Macbook Pro Hard Drive?
I am replacing my 2011 Macbook Pro Hard Drive with a Solid State Drive. Instead of keeping the hard drive on an external enclosure I was wondering if I can use it to upgrade my Mac Mini's 160GB hard Drive with the one Im taking out of the MBP. And if so, is there any special formatting I would need to do?
It should work fine. No special formatting required. It actuality, I suspect that if you connect the HD, the Mini will boot into the OSX that was on the MacBook.
When you replace the HD in the Mini just be careful with the antennas and their wires and connections I accidentally disconnected the wifi antenna on mine when I replaced the HD. -
My Macbook Pro hard drive got locked. How can I unlock it?
My Macbook Pro hard drive got locked. I have replaced the drive with a new drive. I put the old drive in an external case. How can I unlock the old drive to get my pictures off and put on the new drive. I can see the drive but I cannot get to the iPhoto files because it is locked. Is there an easy fix?
How did the drive get locked? That doesn't JUST happen for no reason. The only way to unlock it is to put it back in to the Mac it came out of and UN-LOCK it.
-
2011 Macbook Pro Hard Drive Upgrade?
Hi. I am looking at upgrading my 2011 Macbook Pro hard drive. I want to get a 7200 RPM hard drive. I have been looking on Newegg and doing some research, and from what I can tell, the 2011 Macbook Pro uses a 3.0GB/s interface. If I were to buy a hard drive that has a different interface, like a 6.0GB/s interface, would it be compatible? Does anyone know the sizing for an MBP hard drive?
Also, it doesn't matter who the manufactorer is right?
And finally, does anyone have any recommendations?But in my Honest opinion I don't think you'll really notice the difference between the 5400 and 7200 rpm unless your rendering large video files or transfering large amounts of data to an external or USB drive. But again you'll be limited on the speed of the external connections that your transferring too... If you really want to notice a difference, get the SSD with a Sata 3 or 6.0GBs connection speed. But the difference between a 5400 and 7200 rpm drive for normal tasks is almost negligable, you probably won't even notice the difference, but if you get the SSD you'll definately notice a difference in boot time, transfer speed, video rendering speed, copying speed of large files, etc...
-
My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!
[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465] -
My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?
You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac. -
New 15" Macbook Pro hard drive failure
It is common for a 15" Macbook Pro hard drive to crash after 3 months? How does Apple Support generally fix? Genuis bar seemed overwhelmed by holiday crowds and recommended an $8k 3rd party vendor.
"Any disk can fail at any time."
Over a large sample, the drives used are extremely reliable. You did not have a large sample, you had ONE drive.
Now you are much smarter than you were before this disaster. Apple will not pay for your data recovery. You (and everyone) need a backup solution.
Apple provides an excelent backup solution called Time Machine, that can do hourly backups to an external drive without disturbing your current work. Buy yourself an external drive at least twice as large as the built-in. Turn on Time machine, make sure it is working, plug it in at least daily, and then don't worry about it any more. -
My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.
After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao. -
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as
My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation.
Maybe you are looking for
-
LR display issue with Windows 8.1
I installed LR 5 on Windows 8.1. The install went fine. When it launched, it prompted me for my product key and I entered it. After it was complete, I exited out of LR. When I went back to launch LR, it launches but will not display. I can hover
-
Problem with fetchedRowcount in master-detail.
Hi all, Good morning. I have a custom master detail page (Sales Module, called from Opportunities page). The master region is query-only and the detail is an updateable advanced table. I'm trying to delete in the detail exactly the same way the tutor
-
i have an old dell computer that my itunes is currently on, can i some how switch my itunes to a different computer? im planning on getting rid of this computer and getting a macbook, i still want to keeo all my songs in my library, what could i do?
-
Family share will not allow to accept the invitation
how to get this to work
-
Hi, I am using a dataGrid to display XML material. I have a lot of information in it, so some of the fields are being displayed at the bottom for the selected item only. Similar to this example http://blog.paranoidferret.com/index.php/2007/08/29/flex