Can you bypass any activity of session in replication??????????

Can i ignore/bypass any batch process going on in any session so that it does not get replicated?????????
Regards
Gagan

Confirm that it meets the specs Apple specifies, easiest way is usually to check
http://www.crucial.com/mac/
Then run Memtest to insure it passes (no matter what you buy or have installed).
RAM can vary from the same vendor and it is possible that "A" works, "B" works, but put both in the same system and they won't.
Another reliable vendor is
www.ramjet.com
Even OWC carries Micron/Crucial as well as Samsung (they may have stopped, I don't see it as often now due to its high price?).
As long as the timing, voltage, SPD and CAS Latency all "match up" - it might! Does that sounds like it is worth a roll of the dice... ?

Similar Messages

  • The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations, and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

    The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations (PC and laptop, both running Win7), and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"

  • (268625273) Q WSI-29 Can you give any performance benchmarks for WLS web services?

    Q<WSI-29> Can you give any performance benchmarks for WLS web services?
    A<WSI-29>: It is very difficult to quantify performance aspects of web services
    since they depend on so many variables including but not limited to: backend system
    processing by stateless session beans and message driven beans, size of XML SOAP
    message sent, system hardware (CPU speed, parallel processing, RAM speed) and
    system software (JVM type and version of WebLogic server). However, let me point
    out that the EJB backend processing of requests both have the best possible scalability
    within the EJB2.0 specification (both stateless session and message driven beans
    can be pooled) and servlets have a proven scalable track record. Thus it should
    be possible to scale your web service deployment to meet demand. The overhead
    in processing XML within the servlet can be significant depending on the size
    of XML data (either as a parameter or a return type). While WLS6.1 does not have
    any features to address this performance concern, WLS7.0 will feature Serializer
    and Deserializer classes which can be dedicated to the XML to Java and Java to
    XML translation (they can also be automatically be generated from a DTD, XML Schema
    or regular JavaBean).
    It is true that web services are not the fastest way to process client requests
    but BEA is committed to making WebLogic server the fastest possible service provider.
    Adam

    see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

  • [SOLVED]What is the meaning of any/active/inactive session in polkit?

    Wiki said  ｢inactive sessions are generally remote sessions (SSH, VNC, etc.) 」.
    So I changed the *.policy file like below to execute the action without password  only when I am logging in remotely.
    (Just for clarifying the difference between any/active/inactive session.)
    <allow_any>no</allow_any>
    <allow_inactive>yes</allow_inactive>
    <allow_active>no</allow_active>
    Contrary to expectations, I couldn't execute the action remotely without password.
    So I changed again like below.
    <allow_any>yes</allow_any>
    <allow_inactive>no</allow_inactive>
    <allow_active>no</allow_active>
    This time, I was able to execute the action remotely without password.
    From the above, I think the remote session is neither active nor inactive.
    Is it true? If so, what is the inactive session?
    What is the definition of active/inactive?
    Last edited by remingtontonpon (2014-08-04 06:16:52)

    'man polkit' explains that 'allow_inactive' and 'allow_active' are for sessions on local consoles.
    Only 'allow_any' applies to any client local or remote.
    This seems confirmed by what you observe on your machine.

  • How can i bypass the activation screen to use my phone as an ipod?

    i have a sprint iphone but no longer have sprint service i would like to use my iphone without service as a ipod can i bypass the activation screen?

    Asadnow2k wrote:
    will this thing work if ipad asking for id and password? i have already a sim card witch one was working before. i bouhgt ipad dont have contact with old user.
    Is the iPad running iOS 7? If it is and you are getting the activation lock you must get the former users Apple ID and password in order to activate it. This is iOS 7 anti theft feature.
    If you cannot, you have a brick in your hands.

  • HT201472 can apple disable any activity on my stolen IPAD based on the serial number

    can apple disable any activity on my stolen IPAD based on the serial number

    No.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • How can you bypass a password-

    How can you bypass a password.  This is my son's phone and he is in trouble.  I need to access his phone.  The account is in my name.  ATT won't help.

    There is no way to bypass the lock screen password. If there were it would not provide any security. It's not AT&T refusing to help; they can't, because the only place the lock code is stored is on the phone. If the phone is backed up regularly to a computer or to iCloud you can restore it as described in http://support.apple.com/kb/HT1212 and then restore the backup. You will still need the Apple ID and passcode that was used to set up Find my iPhone.

  • I guess the problem come from me or I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?

    I guess the problem come from me but I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?
    One more thing. I just update my iphone that my boss gave to me but it seems to be like it giving me some trouble. My iphone was updated not too long and was successful. I try to lock into it and it telling me emergency call. I plug it to my itune and it telling me that the sim card is not valid or supported. So I inserted my sim card that I usually use to call and it still saying the same. Please help me get into it.

    And as far as paying for phone support, here are a few tips:
    If you call your carrier first and then they route you to Apple, you usually don't have to pay for phone support.
    If you are talking to Apple and they ask you to pay a support fee, ask if you can get an exception this time.  That usually works once, but they keep track of the times you've been granted such an exception.
    If you still end up paying the support fee, that fee only applies if it's not a hardware related issue.  In other words, if it can be fixed by just talking over the phone and following Apple's instructions, then the fee applies.  But if your device is deemed to have a hardware failure that caused the issue, then the fee should not apply, and you can ask for it to be waived after the fact.
    This forum is free, and almost all of the technical support articles the Apple tech advisors use are available on this website.  Literally 99% of what they can do over the phone is just walking you through the publicly available support articles.  In other words, you're paying the fee to have them do your research for you.  It's like hiring a research consultant to go look stuff up in the public library so you don't have to.  You're capable of doing it; you'd just rather pay someone to do it for you.
    It's like Starbucks.  You know how to make coffee.  Everyone knows how to make coffee.  And Starbucks coffee isn't any better than what you could make at home for far less.  But you want the convenience.  So you're really paying a convenience fee.  Milk is more expensive at 7-Eleven than it is at the grocery store... because it's a convenience store.

  • Hello , I want to ask some question about ipads \  How powerful is the iPad?  How useful is it for reading books, newspaper or magazines or for surfing the web? Can you identify any shortcomings of the device?   please help me :(

    Hello ,
    I want to ask some question about ipads \
    How powerful is the iPad? 
    How useful is it for reading books, newspaper or magazines or for surfing the web?
    Can you identify any shortcomings of the device?  
    please help me

    it's less powerful than your average computer. THink of it like a netbook but with a better processor.
    It'll do fine for surfing (although if you browse a lot of flash based sites you will need to get a third party browser since safari doesn't accommodate it)
    You may do OK on reading books, papers or magazines, especially if they have apps, but the ipad's screen is backlit, so it doesn't work well outdoors and you may need to fiddle with the brightness so that you don't get eye strain (it's just like doing too much reading from a computer screen)
    I would say the biggest short comings are data transfer. Apple's preferred work flow is that everything is done via iTunes or the internet....well people dont' always have 100% reliable always on internet access so you can find yourself in a situation where you can't get things on/off the iPad.
    By and large, it's a good device for day to day stuff, but is not a computer replacement.

  • I just bought a used Macbook Pro. How do I make the changes to make it personal. Example the iTunes comes up as the old user and I have to have his password to make changes on the laptop. Can you make any suggestions?

    I just bought a used Macbook Pro. How do I make the changes to make it personal. Example the iTunes comes up as the old user and I have to have his password to make changes on the laptop. Can you make any suggestions?
    Also I cant make a right click on the pad. Is that normal?

    Your first going to have to remove all your personal data off the machine to a external storage drive, do not use TimeMachine when it asks as this will copy the entire drive and is unnecessary at this time (also takes too long).
    You need to drag and drop copy your personal data folders (Music, Pictures, Movies etc) to a external storage drive, once done, unmount and disconnect this drive.
    Most commonly used backup methods
    Next your going to follow the Zero Erase and install method for your OS X version, either 10.6 or 10.7, here
    How to reinstall just OS X or erase/install OS X
    10.7 requires your AppleID and password to install, so make sure to have that ready.
    Once you reboot your into the real setup of OS X, which will require your name etc, so it's now your machine.
    Install your programs, iLife package is only free for the owner of the machine.
    If you have the 10.6 machine specific disks, then it's on there.
    If your using 10.7, then you'll have to purchase it from the App Store.
    Last, return your files from the storage drive, consider setting up a TimeMachine or clone on the external drive.

  • Can you buy any type of external HDD and it'll work with any mac or do you have to buy specific ones that cost like €999?

    can you buy any type of external HDD and it'll work with any mac or do you have to buy specific ones that cost like €999?

    You can buy any disk with FireWire, Thunderbolt or USB. If you've got a 2010 or early MacBook Pro, buy a FireWire disk, or if you've a newer computer, a Thunderbolt disk. They'll be faster than the USB, but you can buy an USB hard disk

  • TS1702 I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried t

    I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried to download on different broadband lines without success. Is this an apple problem due to high demand or something else?
    Everything has worked well until about a month ago, up to date iOS 5 and itunes installed. Tried resetting numerous times, turned off all apps still no joy. Ipad was great but now feeling buying one was mistake. Also recent music purchase was useless and tunes would not play correctly.

    Since this is happening on the iPad and the computer, it might be worth a try to reboot your router - unplug it from power for about 30 seconds and then plug it in again.
    Quit iTunes on the PC, reboot it and the iPad as well
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons

  • Can there be any activity apart from end state activity that doesn?t have a

    Can there be any activity apart from end state activity that doesn?t have an outgoing transition?
    For Example: there is a decision box with 3 possible outcomes based on the decision taken
    ? Condition 1: If the decision is to MODIFY, control needs to go to one of the previous activities
    ? Condition 2: If decision is to APPROVE, control needs to go to the end activity
    ? Condition 3: If decision is to REJECT, control needs to terminate the process

    don't the approve decision can have a transition to the end?
    Normally all activities have outgoing transitions, otherwise there is no flow.
    MAriano Benitez
    Join us at BEAParticipate, May 6-9 2007 | Atlanta, Georgia

  • Hello, I bought Lightroom 5. Now I want to migrate to CC. Can you get any discount? Thanks!

    Hello, I bought Lightroom 5. Now I want to migrate to CC. Can you get any discount? Thanks!

    Hi ormandez,
    Please contact the Adobe Sales team for the pricing/discount query:
    Adobe | Sales Inquiries
    Regards,
    Sheena

  • Can you spot any irregularities with this redo log configuration

    DB version:10gR2
    We were frequently getting 'log file sync' ranked 1 in TOP 5 wait events in AWR reports. So i looked at alert log.Can you spot any irregularities from below mentioned Redo log switching i got from the alert log?
    Thu Nov  6 05:00:07 2008
    Thread 1 advanced to log sequence 65790
      Current log# 2 seq# 65790 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo2a.log
      Current log# 2 seq# 65790 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo2b.log
    Thu Nov  6 05:40:37 2008
    Thread 1 advanced to log sequence 65791
      Current log# 4 seq# 65791 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo4a.log
      Current log# 4 seq# 65791 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo4b.log
    Thu Nov  6 05:52:31 2008
    Thread 1 advanced to log sequence 65792
      Current log# 3 seq# 65792 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo3a.log
      Current log# 3 seq# 65792 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo3b.log
    Thu Nov  6 06:19:05 2008
    Thread 1 advanced to log sequence 65793
      Current log# 1 seq# 65793 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo1a.log
      Current log# 1 seq# 65793 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo1b.log
    Thu Nov  6 06:29:04 2008
    Thread 1 advanced to log sequence 65794
      Current log# 2 seq# 65794 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo2a.log
      Current log# 2 seq# 65794 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo2b.log
    Thu Nov  6 06:34:24 2008
    Thread 1 advanced to log sequence 65795
      Current log# 4 seq# 65795 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo4a.log
      Current log# 4 seq# 65795 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo4b.log
    Thu Nov  6 06:42:02 2008
    Thread 1 advanced to log sequence 65796
      Current log# 3 seq# 65796 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo3a.log
      Current log# 3 seq# 65796 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo3b.log
    Thu Nov  6 06:56:19 2008
    Thread 1 advanced to log sequence 65797
      Current log# 1 seq# 65797 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo1a.log
      Current log# 1 seq# 65797 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo1b.log
    Thu Nov  6 07:16:12 2008
    Thread 1 advanced to log sequence 65798
      Current log# 2 seq# 65798 mem# 0: /DLPRD/ora1/APP_MK/APP_MK_redo2a.log
      Current log# 2 seq# 65798 mem# 1: /DLPRD/ora2/APP_MK/APP_MK_redo2b.log

    Log file sync is usually a symptom of "over commiting", perhaps some batch job who commits after every row processed, see Note 34592.1 WAITEVENT: "log file sync" Reference Note for a complete reference.
    HTH
    Enrique

Maybe you are looking for