Can you change all classic controls to 3d ones at once.

I am upgrading from 5.1.1 to 6.1 and wondered if I can change all my front panel controls and indicators from classics to new 3d look.

No you cannot.
Regards,
Doug

Similar Messages

Can You change a classic folder to OSX folder So that CS2 will open it ?

Can You change a classic folder to OSX folder So that CS2 will open it ? I have KPT6 plugin for photoshop,but will install as classic folder, and CS2 will not open it.
PowerMac G5 Mac OS X (10.4.8)

No.
If KPT was not written for OS X, then you cannot convert it.

How can I change all of (or more than one) speaker note to a voice at once?

Hello...
I have a lot of speaker notes that I need to apply a specific voice to. How do I apply the same voice to all of the speaker notes in the whole project at once? Or at least more than one? Any help would be appreciated. Thank you! I am working with Captivate 6.

Hi Vikram,
Thanks. That tip definitely helps! You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices. If you do that, then the drop down box becomes “unclickable”. Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
Ryan
Von: VikramGaur [email protected]
Gesendet: Donnerstag, 20. September 2012 16:25
An: Scharfer, Ryan
Betreff: How can I change all of (or more than one) speaker note to a voice at once?
Re: How can I change all of (or more than one) speaker note to a voice at once?
created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

How can you delete all the e mail at one time instead of one at a time?

How can you delete all the e mail at one time instead of one at a time?

you'd have to do it from the computer,

Can you transfer all apps info etc from one ipad to a new one

I have a new ipad and want to transfer everything from my old one to the new one. Can this be done and if so, please can you help with how?

If you have all of your content in your iTunes library then you can simply backup the old device, then restore that backup to the new one. Otherwise see Recover your iTunes library from your iPod or iOS device.
tt2

How can you change all of the control codes from one number to another?

I'm trying to use CC11 for Dynamic Expression Control, rather than just runing the volume CC7 all the time. My problem is that I would like to do a large select of say all CC codes that are 7 and move them to be 11 rather than do it one event at a time. Is there a technique for this?

Paul Kirk wrote:
My problem is that I would like to do a large select of say all CC codes that are 7 and move them to be 11 rather than do it one event at a time.
The Samplecontruct's recommendation is right and probably conformable if you want to process one or a few midi region(s) containing CC7.
In addition, if have multiple midi regions on a track and want to process in one step then the Transform window is recommended. I.e you select that track (which will select all regions), open the Transform and create the custom template I show in the pic below). Hit the "Select and Operate" (4) button which will select the matching contend (CC7) internally of the track selected regions and operate in one step. This saves time if you must select 50-60 regions and change their CC# using the Event list technique for instance.
!http://img695.imageshack.us/img695/3350/cc711.gif!
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Can I change all iWeb page dimensions at one time?

I have website will about 50 pages. I am now finding out on some browers that the top menu bar is wrapping. I think I can fix the problem by increasing the width 10 pixels or so. Is there a way to do this universally or do I have to change each page individually?

You have to do each page individually.
FWIW it is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown and our websites and galleries will be lost. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This may be of some interest to you: Life After MobileMe.
OT

MSI 890FXA-GD70 - Can you use all 6 PCI Express expansion slots at once?

Hey all,
I'm trying to figure out if it's possible to use all 6 PCI Express expansion slots on the motherboard (the 5 Full x16 slot and the 1 x1 slot) at the same time? I know I'd lose the capability for x16 bandwidth but does using any of the slots automatically disable any of the other slots? I have 6 single wide x1 PCI express cards I want to use at the same time and they do not all seem to be getting recognized by the OS (W7 x64).
Specs on the machine are:
890FXA-GD70 Motherboard - BIOS 1.9
AMD Sempron 145 CPU
4 GB DDR3 Kingston RAM
WD 160 GB Blue SATA HD
Win7 x64
Thanks!

Quote
I have 6 single wide x1 PCI express cards I want to use at the same time and they do not all seem to be getting recognized by the OS (W7 x64).
What cards are they?
By not recognised is mean, not detected? driver conflict?
Quote
I know I'd lose the capability for x16 bandwidth but does using any of the slots automatically disable any of the other slots?
• 5 PCI Express 2.0 x16 slots
- PCI_E1 supports up to PCIE x16 speed (when PCI_E3 is empty)
- PCI_E5 supports up to PCIE x16 speed (when PCI_E6 is empty)
- If you want to install two graphics cards, please use PCI_E1 & PCI_E5 slots
- PCI_E3 & PCI_E6 support up to PCIE x8 speed
- If you want to install four expansion cards into PCI_E1, E3, E5 & E6 slots, these four PCIE x 16 lanes will auto arrange from x16/ x0/ x16/ x0 to x8/ x8/ x8/ x8
- PCI_E4 supports up to PCIE x4 speed
All PCI-E slots can be filled at the same time with no problem.
They will run at x8,x8,x4,x8,x8
The question mark is the small PCI-E x1 slot.
It's not clear if will affect others or will be disabled, or will work fine with x1 speeds as adverted.
What hapends if you fill 5x of those cards into the five of the PCI-E slots, except the small PCI-E x1 slot?

Can you remove all flags, colors, and star ratings at once from a group of selected photos?

Please advise...thank you

Yes, there is more than one way, but I recommend being in grid mode in library, with target photos selected, then what you do to one is done to all, for the most part... (another way is to "context-click" selected photos in the filmstrip...).

Can you change the extensions in Adobe Muse from .html to .htm?

Can you change the extensions in Adobe Muse from .html to .htm?
I'm updating an old site where the extensions for the pages were all.htm. This means that when I upload the site index.htm is not being over written by index.html.

Hi,
It is not possible to change the extension in Muse at the moment. You can export the site as HTML and change the extensions outside the Muse.
Regards,
Aish

How can you change the font size in the application and system headers?

How can you change the font size in the application and system headers? I searched the system and finder prefs to no avail. Changing the screen density is not a good option.
Thanks

I downloaded Tinkertool. Found the font section and increased the size of most selections. The only thing that changed that I can see is the window label. The apple line, bookmarks line, the tool bar in safari are all the same---font size of about 4. Found the finder "show view options" but that didn't seem to change anything either. I'll keep working. Restarted all apps after changes as well.

Can you change the search engine in iPad Safari?

iPad Safari is set to use Google in the upper right search field.
Can you change to another search engine other than Google like you can in regular Safari on or Macs?

Yes, and those might be available through some of the alternative browsers available in the App Store. In addition, iOS provides a range of ways you can filter web content there in Settings. I've not played with it but it looks as though you could exert some control that way.

Can you change the ruler color of grey to be an actual color?

So in Illustrator, Photoshop and InDesign, can you change the rulers to be something other then the boring grey. I mean can you change it to actual be a color? If yes, how? If no, Adobe really needs to implement this. I think to have the rulers be in a color would help greatly for visibility.
Thanks for any help. Thought perhaps there may be an easter egg or trick possibly to do this.
Jeff

In my pages the shapes are green with a black line. Yo can change it by clicking on the format bar. See image. You can also change it in the Inspector palette > Graphic tab > Fill
You could create a document with all the shapes int the right colour and save as a document or template. Then you can use it by "copy and paste" the shapes into a new document

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

Several protocols may be used.
Here I describe two of them.
(1) the one which I use : install and use the "Convert to Lowercase" service available in the free WordService
(2) copy your text, paste in TextEdit and enter the Edit menu.
I guess that you will recognize the items in your English menu.
I apologize but I don't know the English items.
Yvan KOENIG (VALLAURIS, France) jeudi 16 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

Can you change the UseNames to a different field? e.g. FirstName+Lastname rather than displayname?

Can you change the UseNames to a difference field? e.g. FirstName+Lastname rather than displayname?
I have the problem that all our display names are lastname, firstname so when you join if your name is Fred Bloggs it will announce "Bloggs, Fred is joining the confernce" I'd rather it say "Fred Bloggs is joining the conference"
I cannot change the display name used in the AD as lastname, firstname is the corporate standard.

Please refer to http://social.technet.microsoft.com/forums/lync/en-US/839ef1ad-522b-4191-8e90-3e277d318516/ms-lync-ms-exchange-display-name-attributes
You can use ABSconfig from Lync Reskit tools
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

Can you change all classic controls to 3d ones at once.

Similar Messages

Maybe you are looking for