Can you change export setting?

Any way of changing the export setting on LiveType? I'm working with dvcpro codec 720 60 and the default export is Animation. Anyway of changing this on LiveType? Thanks!
*Taking it to FCP7 and trying to match Sequence settings
Message was edited by: Chulo01

LiveType always exports as Animation because of the Alpha channel.
There is a setting for 720 HD in Edit > Project Properties. You will have to customize the frame rate if your FCP Timeline is 60P. Easy enough to do, just type in the numbers.
Instead of rendering a movie, you should save the LiveType project file and import that into FCP (it has a .ipr ending). You will have to re-render both the .ipr and the .mov output from LiveType. Save yourself a step and just import the .ipr. It can be treated exactly as if it were a video clip.

Similar Messages

  • Can you change and set your own defult midi sync project settings

    Hi All,
    Can you change the default Midi Sync Project Setting so they have your own settings everytime you start up logic Pro X?
    Preferences > Midi > Sync >MIDI sync project settings
    General Default:
    Frame Rate 25 fps
    Check auto detect format of MTC
    Default required:
    Set frame rate to 29.97fps
    check 'auto detect format of MTC'
    check Enable Separate SMPTE View Offset
    MDI Default is:
    MTC and MMC  all unchecked
    Default required:
    Check 'Transmit MTC'
    Check 'Transmit MMC'
    Check 'Listen to MMC Input'
    Any assistance would be appreciated.
    Regards,
               Gavin.

    No, that's not what I typed above.
    The rule is... Preferences are Global, changes made in Preferences affect all Projects.
    "Settings" are on a per song basis.
    In Logic 9 (and I imagine in X as well) there are two main areas to configure Logic.
    1. Is Preferences    Preferences settings are global and affect all projects.
    2. Is Settings          Settings are set for each project, they are not global
    You typed:  Preferences > Midi > Sync >MIDI sync project settings
    See what is says, MIDI Sync Project Settings.
    Preferences has forwarded you into the Settings area so no, the MIDI Sync options are not global, they have to be adjusted for each song, that's why I suggested setting up templates of your most used project setups.

  • How can you change your line access selection?  I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

    How can you change your line access selection?  I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?

        DIVAB71,
    Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • I just set up a wireless network using an airport express. How can you change the network name

    How can you change the name of a wireless network set up with an airport express

    Yes, you can. If you use the current AirPort Express, Apple says that you can connect up to 50 devices. Realistically, make that 25-30 or so before the speed really begins to drop.
    Remember that you will have to reset the modem though, before you connect it to the AirPort Express as the modem "remembers" the settings for your computer.

  • When you first get your phone and set it up, can you change it a few days later?

    Some of the first questions it asks you can you change them a few days later.

    Change in what way?
    If still within the 14 day return window, it can be returned or exchanges for a different model, color, or capacity.

  • How can you change your security question for I tunes?

    How can you change your security question for I tunes?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

  • How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

    How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.

    Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.

  • When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts.  How can I change this setting?

    When I tap on the to line to add an address sometimes people's names come up that I don't have as contacts.  How can I change this setting?

    The only way that I know currently know of to remove old or incorrect email addresses from the Mail app is to reset the iPad back to factory defaults, which I assume that you don't want to to. You could try leaving feedback for Apple and maybe one day we'll day be able to edit them : http://www.apple.com/feedback/ipad.html#ipad

  • I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"?

    I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
    So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.

    wjosten is spot on.  If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
    Ciao.

  • Can you change the extensions in Adobe Muse from .html to .htm?

    Can you change the extensions in Adobe Muse from .html to .htm?
    I'm updating an old site where the extensions for the pages were all.htm. This means that when I upload the site index.htm is not being over written by index.html.

    Hi,
    It is not possible to change the extension in Muse at the moment. You can export the site as HTML and change the extensions outside the Muse.
    Regards,
    Aish

  • Can you change the search engine in iPad Safari?

    iPad Safari is set to use Google in the upper right search field.
    Can you change to another search engine other than Google like you can in regular Safari on or Macs?

    Yes, and those might be available through some of the alternative browsers available in the App Store. In addition, iOS provides a range of ways you can filter web content there in Settings. I've not played with it but it looks as though you could exert some control that way.

  • Can you change the theme color in iMovie for example from its current color of blue to red?

    Can you change the color of a theme in iMovie ?- example: the sports theme is set to be blue and I would like it red.

    No. And that would be nice in your type of example.
    I would recommend that you could TRY to use the "Map, Background & Animatics" earth icon> (next to transitions tool tab), scroll down> add RED background, and ADD Transitions inside some. That might help your example out.
    Hope this helps. Cheers

  • Can't change export settings

    Hi again,
    just fixed crash problem in Blue-Ray loading timeline (thanks Ann), I've another problem.
    I cannot change export setting.
    The window let me choose my best solution (example: PAL, 1440x1080, 25fps, high quality.........), click OK, but, if I come back to check, everything is as I've found at the beginning (1280x720, 50fps, ........) as default setting.
    Same "behaviour" if I try to change H264 or mpeg2DVD default setting.
    I'm only allowed to modify the format (mpeg2 Blue-ray, mpeg2 DVD or H264 Blue-Ray), nothing more.
    Encore, as well as P.P. and A.E., is set to run in admin mode.
    Minnetonka suggested me to do so, when I had problems in registering my SurCode plug-in.
    Win7 64bit, 8 Gb Corsair Ram, Intel Quad CPU Q9650 3,0 GHz
    Thanks for the help.
    Giorgio

    Please,
    just to know if I'm the one who has this problem, so I can try another sw or O.S.installation.
    I'll try to explain better than I did:
    - I have a main video file edited with Premiere 1440x1080 PAL 25fps dolby audio  (high quality setting) plus two short video files edited with After Effects,   same resolution (of course .wav audio file) as video for menus.
    -Open a new project in Encore giving the right settings (same resolution 1440x1080).
    -Opening in file window, "default quality preset" a standard 1280x720 50fps preset appears.
    -I change it in 1440x1080, PAL, 25fps, high quality and click OK and exit.
    -If I came back to this window for checking: ahi ahi ahi nothing is changed and I find the previous preset 1280x720 etc, etc,.
    Thanks indeed

  • How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

    If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
    I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
    How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

    Hi,
    Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
    http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
    http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

  • Can you send/export a still frame from an FCP sequence?

    Can you send/export a still frame from FCP as a picture to the desktop? Doesn't matter if it is a .jpeg, .tiff, . bitmap
    G5 Mac OS X (10.4.8) Dual 1.8

    serach the forum for any of the hundreds of posts detailing this process -
    my personal favorite is shift-N, apple-9, type name, drag to bin, batch export.
    The best thing about the batch export queue is you can set up a batch with the file format and destination folder and then keep adding new clips/stills to export.
    Hope this helps -
    Max Average

Maybe you are looking for