Can you change it back if you don't wanna use boot camp
Can you change it back if you don't wanna use boot camp
Yes. Use Boot Camp Assistant to remove the partition it created. it will return your drive to its original state.
Similar Messages
-
Can you install windows 8 using boot camp?
I open up boot camp and it say it can install windows 7 or later versions, and i have a widows 8 disk.
Welcome to Apple Support Communities
You have a compatible computer, so you can install Windows 8 with Boot Camp. Make sure you mark the option to download the Windows support software, that you will burn into a USB drive and you will install after installing Windows with Boot Camp.
If you need help installing Windows 8 with Boot Camp, see > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf -
Wanna use boot camp and have 19gb free. Assistant tells me I can't since I need to have at least 10gb free. Anyone knows what's happening? tks a lot!
You need to free up disk space before creating a Windows partition. To see how much free space there is on the startup disk, right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac Guides
http://manuals.info.apple.com/en/boot_camp_install-setup.pdf
Boot Camp 3.0, Mac OS X 10.6: Frequently asked questions -
How do you Install Win XP using Boot Camp without use of an optical drive?
So I'm about at my wits end. I'm try to get Windows XP on my OS 10.5.5 MacBook Pro. I've run into what seems to be a bit of a dead in. Unfortunately my optical drive has gone stupid on me and won't allow me to get through the entire set-up. The Mac has know trouble seeing the Installation Disc. After my partition has been created and I click start Windows Installer, the computer reboots in a normal fashion up to when you get the apple with spinning progress wheel. At this point the screen goes black and I get a "-" blinking in the top right corner of the screen. I figure it's just trying to boot from Win Install disk but it just kinda sits there. So here's my question. Is there some way to boot this Windows Installation from anything else but the CD? I luckily have an image of the WinXP CD in about 5 formats. I'm going absolutely crazy because I had just Installed WinXP not more than an hour before I ran into this initial problem but wanted to change the WinXP partition to FAT 32 as opposed to the NTSC format I accidently used. I would really appriciate any help in my dark hour.
System Info
MacBook Pro 4.1
Mac OS 10.5.5
Bootcamp 2.1
Windows XP with Service Pack 2
HL-DT-ST DVDRW GSA-S10N
System was just recently re-installed with fresh copy of a software and updates.Kirkdan:
I really would like to help you and get your issue resolved in your dark hour as you said. I am afraid that I do not have good news for you. This is because the limitation put on by this entire process of installing Windows via boot camp.
The answer to you question to install windows from any other medium other than your built-in optical drive is a NO. This won't work since once Windows begins to install then it will not have all the drivers installed to recognize the external CD drive (USB/Firewire) and installation will halt.
Axel F. -
I need to use windows in order to use Visual C++ for college but I don't have enough space in my internal Hard Drive so I want to install windows 7using boot camp or any other method on a portable hard drive and boot from it.
Please help I need it as soon as possible for school. ThanksYou can't boot Windows natively except on internal drives.
You can use a VM and put the VM image (VHD) anywhere any drive you want.
You are way too low on disk space, seriously so. And no room - even Windows and Mac OS should be warning and balking already.
"emulator" is an old-school term, even true, running a Guest OS under Mac's as a virtual machine, shared resources (RAM, processor) is easier but not the same performance level as running natively.
Comparison of VMware Fusion Parallels VirtualBox
This just posted, an FAQ for Lion and Boot Camp 4.0
Boot Camp 4.0, OS X Lion: Frequently asked questions -
You changed the order of the menu for "Open in a new window" or "Open in new Tab", How can I change it back? Or how can I omit any reference to tabs? I do not use them at all.
You can use the Menu Editor add-on to rearrange or remove menu items - https://addons.mozilla.org/firefox/addon/menu-editor
-
Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks
Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?
-
back in the days of leopard, the dashboard widgets would come to the foreground but you could still see what you were working on. Now I've updated to mountain lion and the work is no longer visible when I activate dashboard. Can I change that back?
Go to system preferences, mission control, and unselect "Show Dashboard as a Space". While you're there, you may want to make dashboard set to a hot corner "Hot Corners" button at the bottom.
-
The radial filter in Lightroom 5 is no longer coming us as a circle but as a black shadow how can I change this back to a circle ?
zescanner wrote:
I have NO DOUBT whatsoever though that this is controlled within the operating code and is not 'hard-wired'. There has to be a way to adjust it. I just don't know what it is.
Certainly one could rewrite or modify the Desktop application to have additional options available or even a provision that would allow for an infinite amount of settings. If you wish, you may register your thoughts with Apple here:
http://www.apple.com/feedback/macbookpro.html
Ciao. -
Hey, I just updated to the IOS 7.1 It has made various boxes that used to be clear/blurred photo to now grey for example the box at the bottom of the screen, Can i change it back? thanks!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
My fiance logged into my iphone with his apple ID and now I can't switch it back to my username. When I go to buy an app his username is in an editable format to beable to change it back to mine. How can I change it back to mine? (when I go to setting,icloud my un/pw are there) Can someone please help? Thanks!
Had you looked in the User Guide, you would have found this: Settings>Store. Tap on AppleID to change.
-
The app icons and font on my iPhone 4 just went to massive making it difficult to even scroll how can I change it back, where do I go which menu? Thanks in advance
Next time you accidentally use 3 fingers it will zoom again. Unless you need the feature you're better to turn it off
-
I have two iTunes accounts. One was set up for my iPhone; the second was created for my iPad. I just updated my iPhone and it linked my to my second iTunes account instead of my primary account. How can I change it back to my primary account?
Hey bjboles,
Welcome to Apple Support Communities.
The article linked below describes what to do after changing your Apple ID, but you can use it as a guide to resolve the incorrect Apple ID account information entered issue that you described.
Apple ID: What to do after you change your Apple ID - Apple Support
Ciao,
-Jason -
When I open a new tab, the new tab used to show shots of 6 or so of the last sites I'd viewed, so I could easily click on one and go to it. Now it shows a blank tab and I have to type the URL of the page I want. How can I change it back?
Did you have the Google Toolbar installed?
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites
Other extension that have a similar feature:
*Speed Dial: https://addons.mozilla.org/firefox/addon/4810
*Fast Dial: https://addons.mozilla.org/firefox/addon/5721 -
i just did something on my mac and now the date, time and battery percentage are in arabic and it says lebanon (arabic) in the language and text preference, how can i change it back to english?
ps: i'm hopeless.So what you want is for it to say Lebanon (English)? If so, see if this helps:
http://m10lmac.blogspot.com/2012/05/fixing-custom-english-region-settings.html
Maybe you are looking for
-
Problem with reciver file adapter in the content conversion.
I have starnge situation where the fileds in the file created after the content conversion are center aligned. Can someone let me know how to make it right aligned? For eg, i have a field with Char(6) in the file it looks as follows: 1.23 -> | 1.2
-
MIRO: Tolerance Limit At header Level
Hi all, I would like to set the 10% tolerance limit at invoice Header level, instead of invoice item level. When i try to set the tolerance limit (in PP) through OMR6 Transaction, it set the Tolerance at Item Level. Pls suggest the way, so that i can
-
Abrupt increase in alert SID .log file size
alert<SID>.log file is abrubtly increasing in size which is in process filles up a disk space, hence further no DB login. I shutdown the database, took a bakup of the alert log file, nullified the alert log ( using cat /dev/null > alert.log) and star
-
Battery life suddenly cut in half
just yesterday, during my first class, i noticed that i only had about 2 hours left on my battery-- this was just about 15 minutes after unplugging my fully charged macbook. the same thing happened today...i don't know what's going on, i used to get
-
Application server sould not able to send mails once my DR Connetivity down....
Hi all I am using my applications server to send mail through my exchange 2010 server. I also have my DR Site server for Exchange 2010 with DAG concept. please find below my server setups Main site 1. Exchange MBX 2.Exchange HUB/CAS 3.Exchange Edge