Can you change the field names in the address book?

Can you change the Pager field name to read 2nd cell?

No.
This add-on https://freeshell.de//~kaosmos/morecols-en.html allows you to modify the labels of the 4 custom fields of the contact card

Similar Messages

  • Can you change battery, SSD Harddrive of the macbook pro retina

    can you change battery, SSD Harddrive of the macbook pro retina

    Officially? No and No.
    Unofficially, OWC has come out with some suitably expensive replacement storage cards that can substitute the "drive" on the Retina, but that's about it.  You're stuck with what you bought for life.
    Battery and RAM are soldered and glued on, can't be replaced without replacing the whole logic board.

  • I wish to modify the name of one of the field name in the sales order.

    HELLO GURRRUS,
                 i wish to modify teh name of one of the field name in the sales ordder.
    what is the procdure,path and steps involved in that.it would be of great help of me if u take some  time and suggest me.
    bye take care hav a happy and peaceful life

    Hi Sameer,
    If you want to change the name or description of the field in the Sales order,
    you have to use the userexit MV45AFZZ and use the Form USEREXIT_FIELD_MODIFICATION.
    Get the help of the ABAPer and decide where do you want to make the change in the Header or the Line items.  Accordingly give the requirements to the ABAPer.
    He will do it.
    Thanks
    Augustine Ponraj

  • Is there any way to read the field name,through the property binded to it.

    Hi
    I want to know that,is there any method exits with which i can find the field names of the screen,if i have the property attribute with me.
    as my req is to make the validation for the property attr,& check  how many fields are binded with the single property attr,i have read the property attr dynamically,now need to find the fields linked,& need to check how many fields have not field value,& through the error msg.

    just read the attribute binded to properties using code wizard ( Control + F7).
    Code generalted will be like :
    DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
        DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
        DATA ls_cn_check TYPE wd_this->element_cn_check.
        DATA lv_ca_check LIKE ls_cn_check-ca_check.
      navigate from <CONTEXT> to <CN_CHECK> via lead selection
        lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
      get element via lead selection
        lo_el_cn_check = lo_nd_cn_check->get_element(  ).
      get single attribute
        lo_el_cn_check->get_attribute(
          EXPORTING
            name =  `CA_CHECK`
          IMPORTING
            value = lv_ca_check ).
    Here i have read attribute CA_CHECK.

  • I have an iPhone 4s. Suddnely for past two days, the contact names from my address book are disappeared.  Has anyone came across this issue earlier and know the solution please?

    I have an iPhone 4s. Suddnely for past two days, The contact names from my address book are disappeared.  Has anyone came across this issue earlier and know the solution please?

    You had to have some kudos for the effort put in to your thread as week as the point you make.

  • How can i read the field name in the internal table

    Hi friends
    i want to read the internal table filed name.
    my requirement is like this:
    data: begin of t_header occurs 0,
           extno(12),
           priotiy(5),
           ecnumber(10).
          end of t_header.
    loop at t_header.
    if the field name is priority i want to write some other
    logic here.....
    endloop.
    Please tell me how can i do this.

    data: wf_fld_cat type slis_t_fieldcat_alv .
    data: wf_repid like sy-repid .
    data: int_tab_name type slis_tabname .
    move: sy-repid to wf_repid  ,
            'INT_OUTPUT' to int_tab_name .
      call function 'REUSE_ALV_FIELDCATALOG_MERGE'
       exporting
         i_program_name              = wf_repid
         i_internal_tabname          = int_tab_name
      I_STRUCTURE_NAME             =
      I_CLIENT_NEVER_DISPLAY       = 'X'
        i_inclname                   = wf_repid
        i_bypassing_buffer           = 'X'
      I_BUFFER_ACTIVE              =
        changing
          ct_fieldcat                  = wf_fld_cat[]
       exceptions
         inconsistent_interface       = 1
         program_error                = 2
         others                       = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    wf_fld_cat[] will hold the itab definition.
    Regards
    Raja

  • How to change a field name in the client web interface

    Hello,
    I need to change name of the field in the Shopping cart Basic data (field Location). Where could I do this?
    Thank you in advance,
    Olga

    Hi
    <u>Which SRM Version are you using ?</u>
    Incase you do not want the storage location fiels displayed in the item details then you can modify the template saplbbp_sc_ui_its_300.html to hide the field.
    By creating screen variant in transcation SHD0 and implementing that screen variant in BBP_screenvariant BADI you can hide the fields.
    Let me know the transaction and fields what you want to hide I can look at it.
    <b>Related links -></b>
    Hide field in SRM"Shopping Cart Status-> Finding shopping cart" html screen
    Re: shide some search criteria in Shopping Cart Status
    Note 974236 - Shopping Cart - Field control
    Regards
    - Atul

  • Can you change iMessage to not use the enter key to send a message on a macbook pro?

    I'm using a mac with OS X Yosemite version 10.10.1 and I'm wondering if you can somehow change the settings of iMessage so that when you press the enter key it doesn't send the message. Thanks if you can help.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Can you change B1 away from using the sa ID?

    Our install of SAP B1 was setup to use the 'sa' id in our SQL Server database, due to security concerns on our system is it possible to create another user id and change SAP to use that ID?  if so what rights are needed within  SQL server for the new id?
    Thank you
    Scott Pflanzer

    Thank you, this does answer part of the above question, that I can change the user ID,  but part of why we need to change is the SQL server that is used to for SAP is also used for other application, and giving the new user ID the same settings as SA would not change the security issues, just move them to the new ID.
    What I need is what sever level access does the new ID need, i.e. Database Create rights etc,  the rights for the SAP Databases are not an issue. 
    Thank you again

  • How to display the field name in the tabulated view for a content query web part

    I have added a content query web part changed the web part file to include custom columns imported and reffered itemstyle.xsl
    to include the tabulated view for the content query.
    However the way it is displayed is such that only the content is displayed.
    As i am using a tabular view wto display the data, i want to display their field names as well.

    Hi  ,
    According to your description, my understanding is that you need to display the field in the tabulated view for a content query web part.
    For your issue, please refer to the code as below:
    <xsl:template name="VendorCustomStyle" match="Row[@Style='VendorCustomStyle']" mode="itemstyle">
    <html>
    <table width="100%">
    <xsl:if test="count(preceding-sibling::*)=0">
    <tr>
    <td width="8%" valign="top"><div class="item"><b>Vendor ID</b></div></td>
    <td width="12%" valign="top"><div class="item"><b>Vendor Name</b></div></td>
    <td width="50%" valign="top"><div class="item"><b>Vendor Description</b></div></td>
    <td width="10%" valign="top"><div class="item"><b>Vendor Country</b></div></td>
    <td width="10%" valign="top"><div class="item"><b>Vendor Date</b></div></td>
    <td width="10%" valign="top"><div class="item"><b>Created By</b></div></td>
    </tr>
    </xsl:if>
    <tr>
    <td width="8%" valign="top"><div class="item"><xsl:value-of select="@VendorID" /></div></td>
    <td width="12%" valign="top"><div class="item"><xsl:value-of select="@Title" /></div></td>
    <td width="50%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Description" disable-output-escaping="yes" /></div></td>
    <td width="10%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Country" /></div></td>
    <td width="10%" valign="top"><div class="item"><xsl:value-of select="@Vendor_x005F_x0020_Date" /></div></td>
    <td width="10%" valign="top"><div class="item"><xsl:value-of select="@Author" /></div></td>
    </tr>
    </table>
    </html>
    </xsl:template>
    For more information, please have a look at the blog:
    http://www.codeproject.com/Articles/756834/Customizing-the-Content-Query-Web-Part-and-Item-St
    http://msdn.microsoft.com/en-us/library/ms497457.aspx
    http://clarksteveb.hubpages.com/hub/Customized-Content-Query-Web-Part-CQWP-in-SharePoint-2007-with-results-Tabbed-Grouped-and-in-an-HTML-Table
    http://blog.sharepointexperience.com/customitemstyle/
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Dynamically stating the field name in the WHERE clause

    Hello All,
    Consider the following select statement.
    SELECT kunnr INTO TABLE gt_kunnr
          FROM kna1
          FOR ALL ENTRIES IN gt_table
          WHERE kunnr = gt_table-<b>cust_id</b>.
    Suppose there is a case where I do not know the name of the internal table field
    (say, "cust_id" in the above case) with which comparison is to be done in the WHERE clause. Only at runtime that fieldname is available. So in the WHERE clause can I mention it dynamically?
    I tried using the following.
    lv_fieldname =  'cust_id'.
    SELECT kunnr INTO TABLE gt_kunnr
          FROM kna1
          FOR ALL ENTRIES IN gt_table
          WHERE kunnr = gt_table-<b>(lv_fieldname).</b>
    But this is  giving a syntax error.
    Could anyone suggest an alternate approach?
    Regards
    Indrajit.

    Hi,
    It is fine with Enterprise version but when I am trying to run the following code in Rel 4.6C, I am getting a syntax error.
    TYPES: BEGIN OF ty_wherecond,
             data(72) TYPE c,
           END OF ty_wherecond.
    DATA: gt_itab1 TYPE STANDARD TABLE OF kna1,
          gt_itab2 TYPE STANDARD TABLE OF kna1.
    DATA:  BEGIN OF gt_kunnr OCCURS 0,
                kunnr TYPE kunnr,
           END OF gt_kunnr.
    PERFORM fill_itabs TABLES gt_itab1
                              gt_itab2.
    *&      Form  fill_itabs
          text
         -->P_T_TABLE  text
    FORM fill_itabs  TABLES   p_t_table
                              pt_table_dummy.
      DATA: lv_fieldname(30)   TYPE c VALUE 'pt_table_dummy-kunnr'.
      DATA: lt_wherecond   TYPE STANDARD TABLE OF ty_wherecond,
            lt_condtab     TYPE STANDARD TABLE OF hrcond,
            ls_condtab     TYPE hrcond.
      FIELD-SYMBOLS <fs_wherecond> TYPE ty_wherecond.
      pt_table_dummy[] = p_t_table[].
      CLEAR ls_condtab.
      REFRESH: lt_wherecond[],
               lt_condtab[].
      ls_condtab-field = 'KUNNR'.
      ls_condtab-opera = 'EQ'.
      ls_condtab-low   = lv_fieldname.
      APPEND ls_condtab TO lt_condtab.
      CALL FUNCTION 'RH_DYNAMIC_WHERE_BUILD'
        EXPORTING
          dbtable         = space " can be empty
        TABLES
          condtab         = lt_condtab
          where_clause    = lt_wherecond
        EXCEPTIONS
          empty_condtab   = 01
          no_db_field     = 02
          unknown_db      = 03
          wrong_condition = 04.
      LOOP AT lt_wherecond ASSIGNING <fs_wherecond>.
        REPLACE '''' WITH '' INTO <fs_wherecond>-data.
        REPLACE '''' WITH '' INTO <fs_wherecond>-data.
      ENDLOOP.
      SELECT kunnr INTO TABLE gt_kunnr
          FROM kna1
          FOR ALL ENTRIES IN pt_table_dummy
          WHERE (lt_wherecond).
      IF sy-subrc EQ 0.
      ENDIF.
    ENDFORM.                    "fill_itabs
    The syntax error says "The WHERE condition does not refer to the FOR ALL ENTRIES table".
    Even after using the FM 'RH_DYNAMIC_WHERE_BUILD' as suggested by you, the syntax error is coming.
    Could you please suggest how to ignore this?
    Regards
    Indrajit.

  • How to get the field name in the PAI

    Hello All.
    I have to run a FM on one of two fields in the screen.
    I don't want to write two different moudles to these fields like this:
      FIELD scr100-lenum1   MODULE check_lenum1   ON REQUEST.
      FIELD scr100-lenum2   MODULE check_lenum2   ON REQUEST.
    I want write one moudle that i could ask there - > from which field did i came, like this:
      FIELD scr100-lenum1   MODULE check_lenum   ON REQUEST.
      FIELD scr100-lenum2   MODULE check_lenum   ON REQUEST.
    please advice..
    thanks, Barak.

    Use get cursor statement.
    Ex:
    GET CURSOR FIELD wa_field1.
    u will get the filed name in wa_field1.
    Reward points if helpfull.
    Regards,
    Gopi

  • Finding out the field name from the columns shown on the screen

    Hi,
    I am new to CRMOD.
    I see a lot of columns shown on the screen, say in the Account object.
    Is there a way to find out which column in the Detail screen maps to which exact field in the Admin page ?
    Appreciate all the help
    Regards

    If you go to Admin > Application Customization > Account > Account Field Setup, you will see the list of all the fields. If you have custom fields, then click on the Rename button on the top left corner of the page, and then Advanced and it will show you the ITAGs of the fields.
    Since you are new to CRMOD, play around with it and also read the help file and you would understand the app a lot better
    Udaya

  • How do you change your device name on the latest version of Itunes?

    I can't figure it out...

    Connect your device to iTunes. Select it in the device section (left) then click on its name (center of screen) and edit it. Or you do it on your device in Settings -> General -> About -> Name

  • Can you change or copy and paste the duration parameter?

    I have a ton of stills already in the timeline that I'd like to extend the duration. Is there no way to copy and paste the duration parameter or to extend the duration of all of them at once?

    select them all... Inspector>Properties>Timing>duration.. you might then wanna adjust your in points on in your timeline cause there's gonna be lots of overlapping... -_-

Maybe you are looking for