Can you compare the performance of the old and new Time Capsules

HI,
I have had the older Time Capsule for some time, using it for back up but not as my primary router. Router was provided by ISP but it is aging and I have to purchase a new router to maximize performance. Would like to go Time Capsule only and am wondering if the new Time Capsule will be superior in performance as a route to the old. Any advice?

The "new" Time Capsule has wireless "ac" capability, 3-5 times faster than normal wireless, but your Mac will also have to have "ac" capability to really take advantage of the faster speeds.
Even if you don't use the "ac" capability immediately, the new TC runs much cooler than the previous version of the TC, and the antenna arrangement has been improved, which provides a bit better wireless coverage.

Similar Messages

How to transfer backup file from old to new time capsule?

I'm having trouble copying the backup from my old to new time capsule. I tried using this http://support.apple.com/kb/HT5097?viewlocale=en_US

You need to point out at which point you are failing.
You do need the two TC plugged into each other by ethernet.. do not even dream of doing this over wireless. So a computer is plugged into the primary TC as well.. the secondary TC is in bridge mode.. you then simply copy and paste the sparsebundle from one TC to the next.
IMHO this is not a good idea.. you are much better starting a new set of TM backups on the new TC.. keep the old TC for a few weeks to make sure there is nothing you need to recover then wipe it.
There are also instructions in pondini if you insist on doing it.
Transfer TM backups..
Apple doco. http://support.apple.com/kb/ht5097
Pondini doco http://pondini.org/TM/18.html
The apple doco you have already tried.

(261705413) Q RPCC-21 Can you compare a performance of "usual" RPC from EJB and RPC from Web Services?

Q<RPCC-21> Can you compare a performance of "usual" RPC from EJB and RPC from Web
Services?
A<RPCC-21> There are additional performance overheads for invoking a web service
when compared to straight EJB invocation. However, you should not think of web
services as a way to replace your EJBs instead you should be willing to accept
some performance decline for the massive gains in platform interoperability and
the ability to exposure your services outside of you firewall.
Additionally, performance decreases will be dependent on several factors. The
most significant of which is the XML-Java and Java-XML translation of the SOAP
message. This can be very fast if the XML structure is simple but if you web services
requires a parameter that has a complex XML format you may see a more significant
slow down.
Adam

Sorry if this sounds like I am new to this but I am.
So, the extended version is the format that would be used if you were not utilizing the files that the wsdl2java function creates?
And this is done to when you want more flexibiility for the user to call your service?
So, you would push to have the stub files used when you want to control how the web service is used?
thanks for the feedback.

How can i connect my existing airport express to my new time capsule network?

I have an older airport express for wirelessly extending my network in my apartment. I bought a new Time Capsule and my airport express flashes amber and cannot find the time capsule to connect. How do I get them connected?

You can use the USB3 connections for USB2. That's downward compatible. Just runs at USB2 speed.
Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire. But the FW adapter is not at the apple store as yet (at least at the time I am posting this).

Can you move files between two different user accounts in Time Capsule?

I copied a bunch of stuff from my old NAS (which used FAT) to Time Capsule under one user account... I then reformatted the NAS to HFS+ so I could just use it as a USB drive connected to the TC. Now I realized that I want to have one of those folders in another user directory. I cannot open two different sessions of the TC on the computer...at least I have not figured out how to do this. Is there a way to accomplish this without copying the folder to my computer, then copying it back to the other user directory? It is several gigs.

you can crop files from one account to another using the Public Dropbox which every user account has. Log into the user that has the files you want to move, then drag the folder you want to the new users' dropbox:
I suggest a small scale test on a few files first before moving gigabytes of files.

Can you use disk utility to make a backup of Time Capsule?

I have a client who would like to keep a lot of important files on his time capsule for network usage, however I would like him to back up the time capsule. Can you use disk utility to make a copy of the data on the Time Capsule?
Lastly is there a way you can remotely access the files on the time capsule? (he would like to remotely access files on the time capsule).
thank you.
you should be able to use Back to my Mac to access the time capsule correct?
Message was edited by: RonPaul08

no one willing to attempt this for me?

Transferring Time Machine backup from old to new Time Capsule

After transferring my old Time Machine backup from a 5 year old Time Capsule to a new Airport Time Capsule, my MacBook Air wants to start a new full Time Machine backup to the new TC. I was under the impression that the Time Machine backups would pick up where they left off. Was I mistaken? Is the backup supposed to begin anew even if you've transferred an old backup?
Also, if it must begin from scratch, how would I access the old TM backups if I needed to restore a file from the old backup?
Thanks for any help you can provide.

pmpknetr21 wrote:
After transferring my old Time Machine backup from a 5 year old Time Capsule to a new Airport Time Capsule, my MacBook Air wants to start a new full Time Machine backup to the new TC.
How far did you go? By that I mean did you allow the MBA to actually start the backup.
It can be very simple thing.. I have done it lots of times in my repairs to Time Capsules.. if I move a sparsebundle to another location, TM will not even check for the old sparsebundle until it start running.
So the operation is as follows..
Move the sparsebundle.
There is an Apple document as well as what Pondini produced.
Transfer TM backups..
Apple doco. http://support.apple.com/kb/ht5097
Pondini doco http://pondini.org/TM/18.html
As long as you are talking network backups it doesn't much matter. The same rules apply to moving the sparsebundle.
When you reset TM to the new location of the backup.. it will always tell you it will begin a new backup..
As long as you did not change the computer name.. or install a new OS or upgrade.. only when the backup actually starts will it look for existing sparsebundles.. find it.. and begin from where it left off.
So you simply have to start. Wait for TM to figure out there is an existing sparsebundle with the correct name.. and start what will often be a deep scan of the existing sparsebundle. So it can take a long time.. and we do still recommend doing this first one by ethernet.. albeit on an Air that does mean buying the thunderbolt to ethernet dongle.
As a general principle I generally recommend people do start a new backup. Archive the old one.. it is easy to access old backups.. Again see pondini FAQ.. 14-17 on all the neato things you can do.

Time machine keeps performing full backup to my new time capsule

After years of perfect time machine function to a local usb drive, I bought a time capsule and reconfigured time machine to backup there for my wife's macbook air and my macbook pro.
The macbook air time machine is running perfectly. However after a week or so the time machine on my macbook pro has repeatedly performed a full backup and lost all the backup history. I clearly cannot keep on like this and find it very worrying that this piece of technology, even if it loses connection for some reason, is not robust enough to recover the incremental backup?
Is this a weakness of time machine design? or is there something obvious I need to check?

try if this user tip helps.

HT5548 I upgraded one of my programs and now the old and new both appear on launch pad, and I can't delete the old one. Is there a way I can do that?

I upgraded one of my programs and now the icons for both old and new appear on the launch pad. I don't need or want the old version to display, as it's been imported into the new one. I can't seem to figure out how to edit it off the launch pad.

Hi there,
More then likely, the old version was installed independently from the App Store. The article below goes over the process for removing these application.
OS X Lion: Install, update, and uninstall apps
http://support.apple.com/kb/ph4524
To uninstall other apps, drag the app to the Trash (the Trash is located at the end of the Dock), and then choose Finder > Empty Trash.If you change your mind, before emptying the Trash, select the app in the Trash, and then choose File > Put Back.Warning: When you empty the Trash, the app is permanently removed from your computer. If you have any files that you created with the app, you may not be able to open them.
Hope that helps,
Griff W.

What is the best way to set up my time capsule with Existing Uverse

Hello,
I have read through some of the threads regarding the co-existence of Uverse and a time capsule. But it all seems very advanced to me. Here is what I'm wanting to do.
I currently have Uverse. I have the box in my living room attached to a wall outlet, via Ethernet. I have 3 TVs, all with Uverse boxes. Wirelessly, I have several devices connected to the Wifi at any given time. An iMac, 2 iPads, a MacBook Air, 3 iPhones, Apple TV, an XBox and 2 smart TVs.
So my Uverse Wifi pretty much stinks. It's not bad right in the livingroom where the box is, but in my bedroom and office it's pretty poor. When I try to watch Apple TV in the bedroom I end up watching a lot of spinning as it waits to connect:(
I was told at the Apple Store that a time capsule could help with that in addition to creating a back up of my computers. Excellent! So I purchased it. But here is my issue. My main iMac, the newest computer with the most up to date software, is in my office. But my Uverse equipment is in the living room with the TV. So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule? Because they are rooms away from each other:( Is ther any way someone can take me through this step by step like setup for dummies?:) I would be so grateful!
Thanks!!

So do I have to hook up an Ethernet cable to both the Uverse AND my computer from the Time Capsule?
I'm not sure that I understand everything that you want to do and where devices will be located.
The Time Capsule must connect to the "main" Uverse router using a permanent, wired Ethernet cable connection. An Ethernet cable can be run up to 300+ feet with virtually no loss, so you should be able to locate the Time Capsule wherever you want.....unless you have a very large estate.
If you want the Time Capsule to strengthen the wireless signal provided by the Uverse router, then the Time Capsule must be located in the area where you need that additional signal strength.
If I understand your post correctly, you plan to install the Time Capsule in the office? When you do this, you can configure the Time Capsule to create a wireless signal that uses the exact same wireless network name and password as the Uverse wireless network.
That will provide a much stronger signal for your Uverse wireless network in the office area. Hopefully, the bedroom that you mention is close to the office, so it will pick up the stronger wireless signal from the Time Capsule.
The iMac in the office can connect to the Time Capsule using another short Ethernet cable connection, or the iMac can connect using wireless. A wired connection is always preferred, if possible.
At this point, I guess the first question would be.......
Do you have a location for the Time Capsule that will be close to the office....and...the bedroom where you want a stronger wireless signal?

My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>

No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

I can not delete my history and adding new bookmarks. Upgrading to later Firefox versions and/or re-installing didn't help. The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.

I can not delete my history and adding new bookmarks.
Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
== This happened ==
Every time Firefox opened
== the Firefox is being used

I think I have a solution.
First, download the add-on SQManager. This should be included with FireFox, it is really good.
Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
I think that if I just delete all the websites in moz_hosts....
Wa-la...History Gone!!!
As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
Please tell me if you see any flaw in this.
''I think it's the solution we've all been looking for!''

Can you make key photos on the iPad?

Can you make key photos on the iPad?

Michael Morgan1 wrote:
That is the only way of doing it.
When the OP updates to iOS 5, future updates can be performed in Settings > General > Software Update.

Can you please make an update to open and show itunes photo files on the computer as well as devices ????????? PLEASE?????????

Can you please make an update to open and show itunes photo files on the computer as well as the devices ??????? PLEASE????????????? It's a real pain to view old photos for time and capacity reasons!!!!

You seem to think you are talking to Omnifocus here. The odds of actually reaching them here are practically 0%, I would guess.
I suggest you go to the omnigroup forums and present your suggestions in the omnifocus forum.
http://forums.omnigroup.com

Can you compare the performance of the old and new Time Capsules

Similar Messages

Maybe you are looking for