Can you connect a usb SuperDrive if you use a lightning to usb camera adapter and a usb hub?

I was just wondering if ypu could connect a usb SuperDrive if you use the lightning to usb camera adapter, a usb hub, and then plug the SuperDrive into the hub. Will it work to play disks, or movies, or something?

No, drive consume too much power.
Try using a wireless flash drive.

Similar Messages

  • I can not connect to my work e-mail using both regular e-mail set-up and mail 2003 (work has Outlook 2003).  I get the error message "no internet connection- as soon as a connection is made it will switch back".  Does anyone have any suggestions?

    Why can't I connect to my work e-mail (Outlook 2003) using either the regular e-mail account set-up or Mail 2003? Does anyone have any suggestions?

    I have yet to find an email server that does not work with Mail.app. Your solution will be to configure its ports and send/receive protocol according to the email server's requirements.
    Try the Zimbra support forums. I found this excerpt from a relevant post:
    http://www.zimbra.com/forums/users/46221-mac-mail-app-dont-work-outside-company. html
    in which the following ports were suggested
    ports 25, 465, and/or 487 to send mail.
    port 143/993 to retrieve mail over IMAP

  • Can you connect a ps3 to your Mac using apple tv?

    Can you connect a ps3 to your Mac using apple tv?

    24r wrote:
    Can you connect a ps3 to your Mac using apple tv?
    I'm not quite sure what you mean by this - do you mena connect to the Mac to access streaming media or perhaps you were wondering if the AppleTV can behave as a wireless extender to give network access to the PS3 - it can't.
    If you are looking for media server solutions there are several available that run on Mac, some free some commercial.
    Free include:
    http://en.wikipedia.org/wiki/PS3MediaServer

  • Can you connect your Ipad to a projector using Bluetooth

    Can you connect your Ipad to a projector using Bluetooth, if so what projectors, My situation is that I want to connect my Ipad3 wireless to a projector where there is no wifi available so the apple TV and airplay won't work.

    No.
    If you have an Apple TV, get an Apple Airport Express wireless router which is small enough to fit on your pocket. You can set up a wireless network without having to have internet for your iPad and Apple TV to be connected to.
    Or use a wired connection.

  • Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?

    Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.

  • Lync 2010 iPhone - Can't connect to Exchange web server. you can try again later

    Hi there,
    I installed Lync 2010 mobility, and works fine, but iPhone users have a :
    Can't connect to Exchange web server.
    you can try again later
    Now does this have anything to do with it? And how do i fix it? I searched but nothing relevant

    Total server discovery time: 0.3 seconds
    Starting Lync server autodiscovery
    Please wait; this test may take several minutes to complete...
    Starting automatic discovery for secure (HTTPS) internal channel
    Server discovery has completed for https://lyncdiscoverinternal.contoso.com/.
    Automatic discovery results for https://lyncdiscoverinternal.contoso.com/
    Access Location                          : Internal
    SIP Server Internal Access               : server.contoso.com
    SIP Server External Access               : sip.contoso.com
    SIP Client Internal Access               : server.contoso.com
    SIP Client External Access               : sip.contoso.com
    Internal Auth broker service             : https://server.contoso.com/Reach/sip.svc
    External Auth broker service             : https://lync.contoso.com/Reach/sip.svc
    Internal Auto discover service           : https://server.contoso.com/Autodiscover/AutodiscoverService.svc/root
    External Auto discover service           : https://lync.contoso.com/Autodiscover/AutodiscoverService.svc/root
    Internal MCX service                     : https://lync.contoso.com/Mcx/McxService.svc
    External MCX service                     : https://lync.contoso.com/Mcx/McxService.svc
    Internal UCWA service                    : service URL is empty in the discovery response
    External UCWA service                    : service URL is empty in the discovery response
    Internal Webscheduler service            : service URL is empty in the discovery response
    External Webscheduler service            : service URL is empty in the discovery response
    Server discovery succeeded for secure (HTTPS) internal channel against URL https://lyncdiscoverinternal.contoso.com/
    Starting automatic discovery for unsecure (HTTP) internal channel
    Couldn't connect to URL http://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
    Server discovery failed for unsecured internal channel against http://lyncdiscoverinternal.contoso.com/
    Starting automatic discovery for secure (HTTPS) external channel

  • Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

    Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

    The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
    You will need to the Lightning to VGA adapter directly
    http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
    Or the Lightning Digital AV Adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    If the projector supports HDMI input.

  • Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    Can someone connect in FaceTime if they are using a friends Macbook Pro, yet, doens't have an Apple ID??  For example, I have an IPAD and a Macbook Pro.  Can I connect to FaceTime on my Macbook Pro and connect with a friend using my IPAD????

    I have also tried changing the contact emails(you can contact me by) in Facetime(diff email for IPAD and Macbook Pro).  Facetime tried the call, I see the accept buttom appear and it goes away as the call never connects?   Any ideas??

  • Can't connect to a majority of webpages using the RG54gs residential gateway

    I'm stumped with the MSI Residential Gateway.
    We primarily got it as a gift for my father-in-law who had just aquired a centrino laptop.  He started complaining that he was not being able to download his e-mails.  Found out later, it was because the gateway shuts off the connection after some time of inactivity and on occassion after a few minutes.  There was some improvement after I installed the new firmware (feb release) but it was still there.
    I decided to bring it home and test it on my network.  I immediately noticed that I couldn't visit all the sites I used to.  It seemed that all the secondary sites were no longer available.  An example is, opened google (can connect), google searched for RG54gs and come up with the msi website but when I click on the link to the msi website, I get a page not available error.  This is also the same thing that happens to the rest of the links.  I hooked all connections back to my accton router and I'm able to access all site again.
    Can't  figure out what the problem is?
    There was a suggestion that for Ppoe connection you're suppose to leave the "connect on demand" button disabled.  I found a little improvement when it was enabled. All this is using the wired part. Using the wireless is totally useless with almost everything unaccessible even though the signal is excellent.
    Sorry for the long story but it's really got me to a point where I don't know what else to do.  

    Are you sure that this did not happen on the morning of June 15th when the major web sites were actually unavailable due to Akami problems?
    Check the RG54GS configuration and see what DNS server it is using. Check the configuration of the PC and make sure it is using the RG54GS as the DNS server.
    You don't mention if you are ADSL or cable. An incorrect MTU length (guess at 1400 if your service does not tell you) can cause connections to be dropped.
    I use ADSL and could not connect at all until I got the new firmware, since then things have been OK. I am on a very marginal ADSL connection.

  • Can I connect an A1084 model Airport Express using current version of Airport Utility

    Can I connect an A1084 model Airport Express using current version of Airport Utility?

    You will need an older 5.x version of AirPort Utility to be able to administer the older AirPort Express.  That would mean that you need to have....or be able to borrow for 10-15 minutes......a Mac running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

  • Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!

    Got my ipad mini. It works perfectly fine until I updated to ios 6.0.2. Now I can't connect to wifi. I've tried every solutions offered in every forums and internet sites but nothing happened. Still ipad cannot connect to wifi. HELP!!!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Safari has stopped opening certain webpages and says can't connect to server... This started 3 months ago with FB and now randomly with another site... all other sites are fine.. Help?

    Safari has stopped opening certain webpages and says can't connect to server... This started 3 months ago with FB and now randomly with another site... all other sites are fine.. Help?
    I've tried resetting safari, deleting all webpage data and setting time/date to automatic, but no such luck.
    The message that comes up is: "Safari can't establish a secure connection to the server 'Facebook' "
    I'd be genuinely impressed if anyone were to actually work out what was wrong.

    Hi ..
    Might be a cookies, cache, or extensions issue.
    From your Safari menu bar click Safari > Preferences then select the Privacy tab.
    Click:  Remove All Website Data
    Then delete the cache.
    Open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.
    If that doesn't help, troubleshoot Safari extensions.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • Can only connect to enterprise wifi the first time each day, then does not reconnect and got the "Associati​on Failed" error

    To save battery, I leave my wifi off when the TP's screen is locked.  At home, my TP has no problem reconnecting to wifi after the screen is unlocked.  However, at work, which uses enterprise wifi, I can only connect the first time.  If I lock the screen and then unlock it (causing the wifi to turn off and on again) then the TP will not reconnect and I would get the "Association failed" error over and over again.  If I were to turn the TP off and on again, I would still get the same error.  Here's the strange part, if I come in work the next day, it would be able to connect to the wifi.  If I were to leave the wifi on all the time, it would not disconnect even if I lock the screen.  Now if I were to turn off the wifi and then turn it on again, the TP would not reconnect.  So it seems like the TP can only connect the first time each day....very strange...and frustrating.
    Post relates to: HP TouchPad (WiFi)

    Scimmia is right.  But you AcousticBruce are still very wrong.  You claim there were no error messages.  Yet after much proding and denial you finally provide small portions of error messages which fully identify the problem and can be found in many other posts in these forums.  Yet still, you haven't actually provided full output - instead you paraphrased the output after a couple of "//" symbols.
    If you don't give us the actual output we can't help - except in this case the error is so common we could very easily help.  So could the wiki page on wpa_supplicant if you had read it, as your problem is explictly listed there in a "NOTE" box.  But more importantly if you are reluctant to give us actual output we will not want to help you.
    This issue would have been solved instantly if you would have provided the actual output instead of lying about it.
    The relevant wiki pages:
    https://wiki.archlinux.org/index.php/WP … passphrase
    https://wiki.archlinux.org/index.php/He … er_or_root
    And the related forums posts found after just a quick search of that error message that you finally provided:
    https://bbs.archlinux.org/viewtopic.php?id=167244
    https://bbs.archlinux.org/viewtopic.php?id=184824
    https://bbs.archlinux.org/viewtopic.php?id=178909
    https://bbs.archlinux.org/viewtopic.php?id=190097
    https://bbs.archlinux.org/viewtopic.php?id=191351
    https://bbs.archlinux.org/viewtopic.php?id=191964
    Last edited by Trilby (2015-05-18 11:08:44)

  • Can't connect to App store on any device, i have tried to log out and back in again.

    Can't connect to App store on any device, i have tried to log out and back in again.
    Any suggestions.

    Restart your router.

  • Can't connect to skype, get invalid port,  using laptop with iphone as router

    can't connect to skype, get invalid port,  using laptop with iphone as router

    can't connect to skype, get invalid port,  using laptop with iphone as router

Maybe you are looking for

  • Creating a task field list in c# project

    Hi All, I am writing a small application to simply my monthly forecasting and reporting.  I'm extracting data from my msProject file into a c# application with a local database.  I want the user to be able to select which task data fields to extract

  • How do I get my music from a flash drive onto my phone from itunes

    I had a flash drive with all my music on it, I got the music into iTunes with no problems and when I plug my iPod into my computer iTunes syncs my music with no problem but when I try to get the music onto my iPhone it won't transfer. I have tried to

  • Autonumber hassle---------

    m yproblem is that i hav autonumber field user_id in my oracle table; wen i insert sequence seq.nextval from oracle ide it workz fine...bt now i hav user profil nd i hav to make entries thru java code...nd wen i use pt=con.prepareStatement("insert in

  • Why do i have to keep on buying a charger.

    i have a iphone 5 and i have bought 3 chargers already. it doesnt charge and when i put it through the computer, it says " not compatible" or "not supportive" yes, they are all iphone chargers too and they arent cheap!! am i going to have to buy one

  • Flex datagrid itemEditor

    Hi, I have a datagrid in my application with custom itemRenderer & itemEditor. The rendererIsEditor property is false for the column. I also have a menu bar in my application. Now if I edit any cell the itemRenderer will be replaced with itemEditor a