Can you Connect Cisco switch modules for to N2K?

I have not seen anything about connecting Cisco Switch modules for Blade Chassis to fex. Does anybody now if you can do that?
thank you.

thank you Lucien.
I think you got a right name for N2Ks, a NIC card extender. In my opion N2K should be able to support Blade switches. Not every company has just rack mount servers, most enviroment is mixed. In my case, I run out ports on N5K, but plenty available on N2K. I want add two more blade centers with gig switch modules in them. now I have to buy a N5K!!!. I'm sure Cisco can make N2K to support switches too.

Similar Messages

IP changes on a Cisco Switch Module for IBM BladeCenter

Hi everyone,
I was just wondering if anyone out there is using the MDS modules for IBM BladCenters and if so whether you had had any problems changing the IP details through the BladeCenter management interface. I needed to change a subnet mask but since making the change I've lost all IP connectivity to the module and it shows Status: Disabled under the new IP Details.
I've tried resetting the module to factory defaults and whilst this seems to have had some effect (e.g. the fc ports have all gone down) it has given me any IP connectivity or allowed me to set up a new IP address.
Has anyone else seen this and if so, how did you get round it.
Thanks,
David

Hi Mike,
I saw that it doesn't allow you to change any of the IP config through the CLI, hence why I moved on to trying the MM.
Fabric manager can't connect to the module on it's address (I was just correcting the subnet mask) and it is not pingable from anywhere on the network, so it seems to me that the IP path out through the MM isn't working.
I tried the same process on one of our test chassis and the same thing has happened there.
Configuration for that slot looks like this on the MM:
Bay 3 (Fibre SM)*
Current IP Configuration
Configuration method: Static
IP address: 172.20.221.9
Subnet mask: 255.255.255.0
Gateway address: 172.20.221.3
New Static IP Configuration
Status: Disabled
To change the IP configuration for this switch module, fill in the following
fields and click "Save". This will save and enable the new IP configuration.
IP address 172.20.221.9
Subnet mask 255.255.255.224
Gateway address 172.20.221.3
How does the MM communicate with the module (telnet/snmpv1/snmpv3/ssh?) and with what credentials. I'm thinking that there must be something in how we've configured the switches that is breaking this in some way (we've enabled aaa auth for login, removed some default SNMP details, and disabled the telnet server).
There seems to be rather a lack of docs on these modules, is there anywhere to find out more detail on how they all hang together.
Thanks for your interest and help,
David

Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC

Where can you download NAM 5.1 for windows7?

Where can you download NAM 5.1 for windows7? it seems that i cannot find it, the ones on the web are all for Linux,
thanks,
Han

Hi,
Do you mean NAM for Network Analysis Module? As that is a module/appaliance which requires a specialized designed hardware and cannot be installed on Softwares like for Windows/Linux.
NAM is a Hardware module/appliance that monitors and analyzes the traffic coming/going from network devices. Currently, there are multiple variations of the NAM, software and hardware, such as the NME-NAM for the Branch Integrated Services Routers (ISRs), NAM-1/NAM-2 for the Cisco Catalyst® 6500 Series Switches, and Cisco NAM 2200 appliances. Also, there is Cisco NAM Virtual Blade supported on the Cisco WAVE-574 and WAE-674 appliances.
For more details please check :
Cisco Network Analysis Module (NAM) Deployment Guide
Network Analysis Module (NAM) Products
Let me know if I did not understood the issue properly and you meant somthing else.
-Thanks

Can you connect a ps3 to your Mac using apple tv?

Can you connect a ps3 to your Mac using apple tv?

24r wrote:
Can you connect a ps3 to your Mac using apple tv?
I'm not quite sure what you mean by this - do you mena connect to the Mac to access streaming media or perhaps you were wondering if the AppleTV can behave as a wireless extender to give network access to the PS3 - it can't.
If you are looking for media server solutions there are several available that run on Mac, some free some commercial.
Free include:
http://en.wikipedia.org/wiki/PS3MediaServer

Can you share the source code for Customer ToughDay stress test tool?

Hello,
I would like to try Customer ToughDay tool (http://dev.day.com/docs/en/cq/current/testing/tough-day.html) for load testing of our author instances of CQ5. While I am able to execute the application, the logging with log4j seems to be configured incorrectly.
Can you share the source code for toughday-5.5.jar? I think it can be a very good starting point for those of us who are new to CQ5 and need to load test it.
Thank you!

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

Can you connect older 27" LED Display to current iMacs?

Hi - finding conflicting information via Apple support pages and google and wanted to throw this out to the community for verification.
My endstate is to run dual 27" LEDs...one being on a current iMac and the other being a first-generation Apple 27" LED.
Can you connect a first-generation Apple 27" LED display utilizing the min-display port to the current 27" iMac (non 5K) utilizing the Thunderbolt port? If so - is it a simple Thunderbolt-to-Thunderbolt cable or is there an adapter on the mini-display side required? Thanks!
JC

Niel - thanks for your reply.
With your reply, I went back and reviewed #22 and obviously misunderstood it.
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thanks for clarifying!
JC

HT204388 can you connect a GATEWAY TOWER to a MAC 23in CINEMA MONITOR?

can you connect a GATEWAY TOWER to a MAC 23in CINEMA DISPLAY?

Hi, likely you can, but which 23" is it, one requires an expensive DVI-> ADC connector, not the cheaper ADC->DVI connector, the later one has DVI already.
Then it depends what output your Gateway has for Video.
ADC...
http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/TS2085/58846_1.gif
VGA & DVI...
http://cdn.overclock.net/2/21/215b66d1_all-DVI-types.jpeg
http://www.mytechsecrets.com/wp-content/uploads/2011/01/dual-monitor-video-card. jpg

Can you connect your Ipad to a projector using Bluetooth

Can you connect your Ipad to a projector using Bluetooth, if so what projectors, My situation is that I want to connect my Ipad3 wireless to a projector where there is no wifi available so the apple TV and airplay won't work.

No.
If you have an Apple TV, get an Apple Airport Express wireless router which is small enough to fit on your pocket. You can set up a wireless network without having to have internet for your iPad and Apple TV to be connected to.
Or use a wired connection.

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

Is apple tv the only item that can be connected to a tv for airplay to work? Looking for something smaller for the office

How big do you believe an ATV is? They are tiny compared to most devices.
The ATV is the only AirPlay receiver, short of an actual AV receiver with AirPlay support, but those are MUCH larger.

Can't connect to app store for IAP.

I've been trying to buy an IAP item in Defender Chronicles II but when I try to buy it I get a message "connecting to app store" and it stays on that screen until I leave the app. I've been trying for about a week now and have left it on that screen for up to half an hour. I also tried to connect to IAP stores on different games (Tiny Tower, DC1 and Elf Defence) just to check if it would work but the same thing happenes.

Can you connect to the regulat App store on the iPod?
Have you tried on another network?
Try a reset. It cures many ill and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Can you connect via thunderbolt a mac book air 13" (2013) and a imac 21" (2013) together, using the iMac 21" as a 2nd screen

Can you connect via thunderbolt a mac book air 13" (2013) and a imac 21" (2013) together, using the iMac 21" as a 2nd screen

Welcome to Apple Support Communities
Of course. As both have Thunderbolt, it's as simple as buying a Thunderbolt cable, connect them and press Command and F2 keys on the iMac, so the iMac will be used as an external display for the MacBook Air. If you want more information, see > http://support.apple.com/kb/PH11302

Can you connect an iMac to a Lynksys router without an airport express or base?

can you connect an iMac to a Lynksys router without an airport express or base? I tried running it from cable>modem>router and it doesn't sling to the iMac. The airport card in the Mac does seem to be on, and there is a network connection set up. It's an intel iMac7,1.
At my house I have the same configuration going to an old Mac laptop and it works fine.
Any ideas? Thanks

Csound1--
If you mean does the network appear on the Mac when I look for it, then yes.
I think my friend had her wifi network set up properly, or it wouldn't be showing in the list of networks when I check.
the router is a Lynksys WRT160N V3.
I don't think she has the security code so I can check what's actually hooked up (the network name on screen at least appears to be locked). She's had the computer out to the shop and back recently and has never even run anything off the wireless.
I have a feeling I'm going to have to call her cable provider to sort it out. I'm hoping to avoid that. I don't know Mac at all. I could troubleshoot on my PC.
Ultimately, I want to be able to hook a Roku box to her TV to run Netflix.
Any help would be greatly appreciated.

TS3581 CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?

HELLO TO ALL
ABIGMAC1 HERE! GOOD DAY TO ALL
JUST WONDERING IF ANYONE COULD ANSWER THIS
CAN YOU CONNECT A SHUFFLE (gen4) TO A KENWOOD CAR STEREO USING THE SHUFFLE USB CABLE ?
I CAN USE AN AUX 3.5 TO 3.5 BUT NO WAY TO READ THE LIBRARY. PLEASE HELP ME!
THANK-YOU
ABIGMAC1

Check the documentation for the car audio system for device compatibility. A shuffle may not be compatible.
If the car audio system is able to use a regular USB flash drive connected to the USB port, you should just get an 8GB USB flash drive for $5-10, load it with your "car songs" and leave it connected to the car audio system, instead of constantly connecting and disconnecting an iPod.
If the car audio system has an aux. audio input mini-stereo jack, you can get something like this
http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
and connect your shuffle's headphones jack to the car audio system. You can then use your shuffle to play through the car audio system.

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Can you Connect Cisco switch modules for to N2K?

Similar Messages

Maybe you are looking for