Can you create a boot Camp partition on a Fusion Disk?

Can I install a BootCamp partition on a fusion disc?
Can I install a BootCamp partition (Wndows 7) on a 1 TB on which OSX mac Yosemite or Mavericks has been installed first? I have a 2012 MacBook Pro, that already has a 400 GB Boot Camp partition, but I am considering replacing it with a fusion disc or an SSD since I shall have to install a windows compatible medical dictation application that could use a speedier disc. Will Mac OS and Windows interfere with each other on the SSDpart of a large fusion disc ( 1 TB) if I switch back and forth from rebooting on Mac OS , then on Windows and vice-versa? Does the SSD part of the fusion disc get confused, and will the fusion disc tolerate the installation pf a Boot Camp partition in the first place, or just give a stretch of plain 5400 RPM disc without the SSD part ?Can I

1. On single-disk Macs, you can use an SSHD (as a single physical disk), but not an SSD/HDD. There is a no single physical unit which is a Fusion drive. A Fusion drive consists of a physical SSD and a physical HDD. MBPs on which the Optibay has an SSD/HDD and main bay with SSD/HDD will support a Fusion (aka CoreStorage volume). Yosemite supports a Fusion drive, which has an internal SSD and and external HDD (the reverse makes no sense, but is possible).
2. On newer Macs, with 1TB PCIe flash, you have an SSD as your whole drive.
3. The two environments, OS X and Windows are self-contained, on separate partitions. The underlying hardware is common.
4. On a Mini, which supports two drives, I have a 256g SSD/1TB HDD, in a DIY Fusion drive, with Windows on the SSD part. Bootcamp Assistant does not support this, but third-party tools can be used. The other option is to install OS X and Windows on a SSD, and later add an HDD and include into a CS volume. This is what I would recommend for you.
5. The 13-in 2012 MBP will allow you use a USB installer, without the need for an Optical drive, so it is possible to replace the Optibay with an HDD, create a Fusion drive. If BCA is used, it will put Windows on the HDD on this specific machine if the Fusion drive is created first.

Similar Messages

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

Can i adjust the boot camp partition after xp install

can i adjust the boot camp partition after xp install

Hi,
Paragons CampTune http://www.paragon-software.com/home/camptune/ can do this.
Mac OSX and its BootCamp Assistant or Windows cannot.
Regards
Stefan

Boot Camp partition missing, VMware Fusion not working

I'm using OS 10.10.2
Windows 7
Fusion 7.1.0
Winclone 3.7
I've been sharing a boot camp partition with Fusion for a while. I don't know when it happened but when I recently tried to log in using Boot Camp, the partition didn't show up in Apple's start up screen or in the Finder even though I could see it in Fusion.
I needed to expand the partition so I backed it up with Winclone changed the partition from 40 to 75 gig and reinstalled the Winclone file.
Now I'm unable to boot into Windows using Fusion and I still can't see the Boot Camp partition when I start up.
Fusion said
so I did.
The new virtual machine said
and
Now it wants me to upgrade Windows.
Please help.

I saw R.NTFS so I started on the Windows DVD and ran Repair.
Unfortunately I still can't get Boot Camp to do anything beside give me a flashing cursor on a black screen.
What else can I do?
This is from the terminal screen after I did everything above. It still says R.NTFS
Last login: Sat Mar 14 01:30:47 on console
Bruces-MPB:~ bruce$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
Password:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 58 c8 6f |........?....X.o|
00000020 00 00 00 00 80 00 80 00 ff 0f a8 04 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 c9 3e 83 34 55 83 34 4e |.........>.4U.4N|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
Bruces-MPB:~ bruce$

Can I delete the mac partition used to create the boot camp partition?

I am using Mac OS 10.9.5 on a late 2011 17" Macbook Pro.
I currently have an SSD in the primary drive slot with my primary Mac partition and an HDD in the Superdrive slot that has one unused Mac partition that I would like to delete and a Windows 8 partition that I would like to keep.
Can I delete the extra Mac partition on the HDD so I can use that as spare space? It was the Mac partition that was used to run Boot Camp and create the Windows 8 partition that is on the same drive so I am nervous that the Windows 8 partition needs to rely on that Mac partition to work for whatever reasons.
I recently went through a huge ordeal to create a Windows 8 Boot Camp partition as I wanted it on my computer. I had previously taken out the Superdrive and replaced it with a data doubler and the original hdd, and I had an aftermarket SSD in the primary drive bay. I had been using the SSD as my Mac partition and the HDD as spare storage space. For my Boot Camp config, I wanted to split the HDD into 2 partitions and make one Windows 8 and the other spare storage space while keeping the SSD dedicated to my Mac partition. Achieving that required removing the SSD, removing the data doubler, reinstalling the Superdrive, putting the original HDD back in the primary drive slot, installing and updating Mac OS on the HDD, using that Mac install to run Boot Camp and create a second partition for Windows 8, installing Windows from the Superdrive, and then putting everything back by taking out the Superdrive, putting the HDD back in the data doubler, and putting the SSD back in. Everything works now. Understandably I don't want to break anything and have to redo this process.
That said I do want to delete that extra Mac partition and use it as extra storage, if I can do so without breaking the Boot Camp Windows 8 partition.

ilovemac wrote:
Use Disk Utility and remove the "BOOTCAMP" partition. Then make "Macintosh HD" all the way to the bottom to regain space.
Wrong advice. Do not use Disk Utility. Use Bootcamp Assistant to remove the Bootcamp partition and return the drive to a single OSx partition. Using Disk Utility will result in lost space, lost data, and possibly an unusable OSx partition. Read the Bootcamp help and user guides.

How do I create a Boot Camp partition with Windows & blank NTFS partitions?

I'm trying to create this kind of setup:
OS X partition
Windows 7 partition
blank NTFS partition (no OS)
blank NTFS partition (no OS)
This would be much easier if I created just the OS X partition and the Windows 7 partition with the Boot Camp Assistant tool (done this many times before successfully on other computers). The problem begins when I try to split the Boot Camp partition through the Windows 7 DVD partition manager during setup by deleting the Boot Camp partition, and recreating three partitions from the unallocated space. After installing Windows 7 on one of those new three partitions, I'm getting all kinds of startup errors when I try to install the Boot Camp drivers.
What would the best way to achieve this setup?

Yes, I researched many options for three partition dual boot set ups. After many trials and tribulations, there is a simple method that I have used on multiple MBPs.
1. Run Boot Camp Assistant, as per the Boot Camp Installation and Setup Guide. Once you have Mac OS X and Windows 7 set up, check the partitions and back them up (with Time Machine, and Winclone).
2. Get iPartition, and resize the Mac and Windows partitions to what you want, say 100GB each, and set up your other partitions to the size you want. I put mine "after" the Windows partition, at the end of the disk, and have had no problems. It takes a few minutes to create the bootable CD for iPartition, but you get everything you need to do so from Coriolis Systems. You will need your Mac OS X installl disc.
3. Install Paragon's HFS+ for Windows and NTFS for Mac, and everybody can read and write everything.
4. I have both Time Machine and Norton 360 back up the Data partitions, just in case -- to an external drive, of course.
You can boot to either OS and access any partition.

Can no longer see Boot Camp Partition

Hello all,
I was having problems with booting into Boot Camp/Windows 7 (I was just getting a black screen), so I attempted to delete the boot camp partition and reinstall it. When I did that, the program hung for a while, and finally said there was an error deleting the partition. However, it appears it like halfway deleted it, as it no longer shows up! When I go into disk utility, Macintosh HD shows blue, and then there is a 50 GB partition (the size of my bootcamp) that is white, but it is unlabeled. I cannot adjust the partition to make it the whole HD, and if I go to boot camp assistant, and try to make a new bootcamp partition, it bounces back with an error message as well. I am wondering how I can restore the partition back to the original all mac hd partition..ANy help would be greatly appreciated!!
Kevin

WinClone 3 $20
When you move to a new OS: clone your system, make sure you have backups you can use - for each - the partition table "rules" change with each new OS. And you want to reformat a drive from time to time especially then.
Carbon Copy Cloner 3.4 is a good way to clone your OS X partitions.
Basically, "start over" and restore to one HFS volume with OS X then run Boot Camp Assistant, then restore with Winclone image you made easier.
www.apple.com/support/bootcamp
Find CCC and WinClone www.macupdate.com

How can I get my Boot Camp partition off my old drive?

I swapped out the stock 160gb drive that came in my MacBook Pro since it was acting up. I installed a new drive and restored it with Time Machine, but now my Boot Camp partition is still on my old drive. I slipped my old drive into a usb sata enclosure and tried booting from it in hope I could back it up with Winclone. When I went into the startup disk selector the drive would not show up (but it sounded like it was trying to spin up). Earlier when I pulled the drive out of my MacBook Pro it was still functioning fine, so I do not think the drive has failed.
Any ideas on how I can get the Boot Camp partition off the old drive? Thanks for your help.
-Ryan

Some drives require more current to spin-up from a "cold start" than most USB ports put out, even if the port supplies. Additionally, if the drive is failing, it may require even more power for the startup.
I have a couple USB enclosures with external AC power that I keep around in case I run into drives like this. Failing that, I also have a couple of USB cables which use 2 ports to provide additional current. Also the cable length, and gauge makes a difference.

Can VirtualBox use a Boot Camp partition for a virtual machine?

Can Sun VirtualBox be pointed at a Boot Camp partition to use it as a virtual machine, much like VMWare Fusion can?
-John

http://en.wikipedia.org/wiki/Virtualbox
http://blogs.sun.com/fatbloke/entry/windows7_onvirtualbox
Check the FAQ
http://www.virtualbox.org/

Parallels can now run your boot camp partition!

Having seen this question many times in this forum, I thought I'd let people know that the new beta of parallels can boot from your existing boot camp partition. It also has a few other features with some major cool factor. Check it out here.
MacBook Pro - 2.0 GHz - 2GB RAM Mac OS X (10.4.7)

unforunately it won't work if your bootcamp partition is fat32, however they said it will be fixed in the next release!

Removing/hiding Boot Camp partition from VMWare Fusion?

I've just created and configured a Windows Vista Boot Camp partition and all is well. However I don't want to use it within VMWare Fusion but VMW displays it. Is there a way I can stop it from appearing in the VMW menu?
Thanks.

I've just created and configured a Windows Vista Boot Camp partition and all is well. However I don't want to use it within VMWare Fusion but VMW displays it. Is there a way I can stop it from appearing in the VMW menu?
Thanks.

HT5639 What format does the bootable usb you create in boot camp have to be?

I have tried several formats and aeve partitioned my usb but there is always the error when formatting this disk.
What is the right format?

Welcome to the Apple Support Communities
When Boot Camp Assistant formats the USB drive, it uses FAT32 (Disk Utility identifies it as "MS-DOS (FAT)") and then, it copies the files. What happens when you try to copy the Windows support software or a Windows ISO onto it? Also, note that if the problem happens when you try to copy the Windows support software, you can download it manually from the Apple website and copy them manually > http://support.apple.com/downloads

How small can I make the boot camp partition on my MacBookPro internal drive?

it seems that in order to get Windows7 on to my old non supported MacPro 1.1 that I need to firist install onto this mid 2009 MacBook Pro I want to do the install onto an external firwire800 hard drive which I have formater and Downloaded and installed the Windows support folder using the boot camp installer but the installer wants to grab 20 gig of my internal drive for the win 7 install what is the minimun that I must have on the internal drive to install and use win 7 on the external drive?
is ther annother way to get Win7 onto my MacPro1.1 where it can live on an internal drive of its own. I do not have have it running on this MBP5.3 other than to get it running (64 mode) on the old tower In addition to the MBP I have at hand the esternal drive a blank 16 gig thumb drive and a firewire800 external DVD drive that I use mostly as a burner on the macpro as it is faster than the internal superdrive that it came with

I assume that is a product so then I can remove the bootcamp partition from my internal drive and boot to the firewire 800 drive or do I need to have a SSD drive inside the macbookpro first?

Can't format former Boot Camp partition [Thread II]

Erased my partition and now Im left with 370Gb of Macintosh HD and 130 of free space, I want to go back to my 500Gb, please help me Loner T

If you are booted in Recovery console, some CS verbs may not be available.
$ diskutil cs
Usage: diskutil [quiet] coreStorage|CS <verb> <options>,
        where <verb> is as follows:
     list                     (Show status of CoreStorage volumes)
     info[rmation]            (Get CoreStorage information by UUID or disk)
     convert                  (Convert a volume into a CoreStorage volume)
     revert                   (Revert a CoreStorage volume to its native type)
     create                   (Create a new CoreStorage logical volume group)
     delete                   (Delete a CoreStorage logical volume group)
     createVolume             (Create a new CoreStorage logical volume)
     deleteVolume             (Delete a volume from a logical volume group)
     encryptVolume            (Encrypt a CoreStorage logical volume)
     decryptVolume            (Decrypt a CoreStorage logical volume)
     unlockVolume             (Attach/mount a locked CoreStorage logical volume)
     changeVolumePassphrase   (Change a CoreStorage logical volume's passphrase)
diskutil coreStorage <verb> with no options will provide help on that verb
$ diskutil cs decryptVolume
Usage: diskutil coreStorage decryptVolume
        lvUUID|MountPoint|DiskIdentifier|DeviceNode
        [-stdinpassphrase | -passphrase passphrase]
Start a background decryption process that will convert the on-disk bytes which
back the given logical volume from encrypted back to plaintext. You must supply
a passphrase interactively or with one of the above parameters. After this
command completes, the conversion process will be ongoing; you can check
progress with `diskutil coreStorage list`. The volume must be unlocked.
Example: diskutil coreStorage decryptVolume
                  11111111-2222-3333-4444-555555555555
One option is to install OSX on an external volume - OS X: Installing OS X on an external volume - Apple Support and booting from it to erase the internal disk without using the Recovery Console.

I can`t see my boot camp partition in windows 7 insataller

I upgrade a 500GB samsung HDD recently,after that I u restore my system via time machine(10.6.5),I try to install a windows 7(anyway I have to use windows cause my work).But in the windows installer,where warning me that "can not find my disk".
Before that,I used to install windows xp.I could finish the first step(copied the files),but after restart,I select windows partition,the screen just show me a flashing mark("?")
so what can I do?please help me ,thx.

Try this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Can you create a boot Camp partition on a Fusion Disk?

Similar Messages

Maybe you are looking for