Can you create markers that pause video on a DVD using DVD studio Pro?

I basically want to put video into DVD Studio Pro and add chapter markers that will pause the video at specific times. Is there an easy way to do this in DVD Studio - I tried some things but it never seems to be consistant. Sometimes it will pause the DVD at the correct point and other times it will not. Whatever help anyone can give me would be greatly appreciated. I am not used to using DVD Studio, but have used the other pro apps for a long time. Thanks.

I tried that and found that it only worked some of the time - does anyone know if that is a common issue or if there is a special way to do this to make it work? Thanks for all the help.
-Jack Moore

Similar Messages

How can you create a jpeg from video in imovie 13?

In imovie11 you could hit share, convert using quicktime, and then select mov to jpeg or gif. that option is not available in imovie13? Anyone know how to create a jpeg or gif in the new imovie?

When you say you would drag the image itself into the Swatch Palette and it would show the image itself? How would then use this swatch? Can you give an example of what you would apply a jpeg to as a swatch? The only palette that I can think of off the top of my head that you can drag a jpeg into and have the icon appear as the jpeg is the Symbols Palette. Is is possible that you were using the Symbols Palette in the past and not the Swatch Palette?

Compressing Video files to be used in Studio Pro projects

I have a 2hr and 7min video I'm trying to burn to a DVD. It is too large for a single layer and I've been having trouble with burning dual layer discs. Has anyone had any success using Apple Compressor to compress video files that were just a little too large for a single layer disc? What format did you use. I've tried several already and have managed to shave off a few 100 MB but not quite enough. The project uncompressed takes up about 5.7GB in Studio Pro and obviously it needs to be down below 4.7GB. Thanks for any help.

Compressor has a few presets, to compress so that 90, 120, or 150 minutes of video will fit into a single layer disc. I think those are making the assumption that you use the Dolby 2.0 AC3 option as well as the MPEG-2 one. So, if you take your video through compressor and choose the 150 minute preset to make MPEG-2 and AC3, and take those two files into DVDSP, you should easily fit 2 hours and 7 minutes onto a single layer disc.
If you want to squeeze as much quality out of the space as you can, and you're troubled by ending up with a little bit of disc space because you chose the 150 minute preset, you can tweak the settings. To do that open the Presets window, expand the Apple folder and the best quality 120 minutes sub folder, and drag the MPEG-2 5.0Mbps 2-pass 4:3 entry down into the Custom folder. Go into the Custom folder in the Presets window and double-click on the copy of that preset you just made.
An inspector palette opens up. Click on the second of the icons and you'll see settings for the video compression. Click the Quality tab and in there you can tweak the figures. Changing the 5.0 average to 4.7 should be enough to make it just fit 127 minutes. Save those changes, and then when you add your video to the batch list, select your modified setting as the one to use when it compresses the video.

Can you create forms that automatically calculate columns of numbers? Example of such form would be

I am trying to recreate a loan application form which includes several columns of numbers which need to totaled, currently we are using a Word document, but are starting to find that it is cumbersome and very limiting. It was suggested that we check out Adobe forms as a possible solution.

In FormsCentral, you can use formulas in the response table to add together values in a response. For an example of this, you can fill out this form:
https://adobeformscentral.com/?f=nAo5QQeg5J2NDfXYlZW4fw
And you can see the response table for that form here:
https://formscentral.acrobat.com?d=nAo5QQeg5J2NDfXYlZW4fw
I've created two columns that use different labels to add together the number fields in the form. You can mouse over a cell in those columns to see the formulas used.
Hope that helps!

Can you create an electronic signature in a PDF file using Adobe Reader 9

Hello all:
I am filling out an application that I opened using Adobe Reader 9.
It is a PDF document, and at the very bottom there is a field which is meant for my signature..
Is there away to sign this electronically?
Do I need to scan my signature and place it that field?
Can I sign with a pen tool with in Adobe Reader 9?
Or do I need to print, sign the document, scan my document, and then import as a completely different PDF file?
Thanks in advance!!

That depends.
Are they asking you to put a copy of your actual signature on there or are they asking for a "digital signature"?
They are different things.

How can you create a playlist with music and music video and play those from same playlist through Apple TV?

How can you create a playlist on Ipod touch with music and music video, and play those from same playlist through Apple TV? I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem. The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one. I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
Message was edited by: jpewald

Can you create a template that has a header and footer to forms?

Can you create a template that has a header and footer to forms?

Yes but how are they going to create the Landscape versions?
The problem with doing it in Pages '09 as rotated content is that the Headers and Footers are not rotated and there is inherent clumsiness in the rotated content usually being too large for the page when viewed at 90°.
Best to make it in two or more separate documents.
Peter

HT1918 If you are locked out of your account and you dont use that email address anymore, can you create a new account without losing your music library

If you are locked out of your Itunes account and you no longer use the same email address, can you create a new account without losing your music library

Just to let you know that I DIDNT swear in the last post. It was bleeped for using non offensive language. Just letting you know. (And @moderator this subnote isnt "off topic", its just letting colleagues know I'm not in the habit of swearing - something that the search and replace word-bot actaully makes it look worse than it is!!)
Many thanks - please dont delet this footnote (again)
Dom

Can you create apps after 1st May 2015 using Adobe DPS single edition?

Can you create apps after 1st May 2015 using Adobe DPS single edition?
I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???

Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' - even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something?

Can you create a file without presenter's notes?

Can you create/export a file that won't be able see presenter's notes, either in Keynote or PPT format?

Yes, I can export to pdf without the notes. I was wondering if it was possible to send someone the slides in PPT format without including my presenters' notes.
They are lecture slides for a class, so I am giving my students copies in pdf, but I might want to give them to someone else in a format they can edit and use as slides, but without having my notes to myself in there. I suppose it's not designed for such an option, as far as I can tell, hiding the notes doesn't make a difference if exporting to PPT.

How can I create a custom sized video in PP cs6?

How can I create a custom sized video in PP cs6? I have read references to the "desktop" setting but cannot find it. I am trying to find the right settings for a 1080 px x 486 px video (which I need to qualify for hi res on Vimeo). I need to output a 450 x 1000 px video for
my website. Ideally, I'd like the sequence settings as well as the output settings. I am using still shots- no actual video.

What are the exact properties of the still images, particularly the pixel dimensions and pixel aspect ratio (PAR).* The letterboxing (black bars top & bottom) is most likely a result of a mismatch in these settings. If this is the case, then the easiest fix is to make sure not only the dimensions but the PAR match.
Say for instance your source images are 1000x1000 with a PAR of 1.0 (square pixels) and your sequence is set also set to 1000x1000 but with the PAR set to D1/DV NTSC (0.9091), the result would be letterboxing as seen here:
*if you're not sure about the PAR of your source images, right click on one of them in the Project panel and select Properties.

I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

Hi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments

How can you create a spry menu bar with no background colour?

How can you create the first level of a spry menu bar to have no colour? I have a coloured background right now and the colour matches when you load the site in Internet explorer but does not match in Firefox. Any suggestions are welcomed on how to fix this.
Thanks!
HK

Here is the site:
http://partnersnaturally.ca/
I am learning with code, (obviously) so any feedback would be nice. I use dreamweaver CS4, but when I originally designed the site it was in a much older version of dreamweaver. I wonder if that could also be a cause. (besides human error)
Thanks again,
HK

Can you create a new folder and put several documents in it in Adobe?

Can you create a new folder and put several documents in it in Adobe?

Thank you for your help. Now I just want to expand on this a bit. To use the Applescript you have supplied me, how do I tell it to name the folder other than by date, and where to put it?
Let me say, preferably, is it possible to make an action like this right-clickable? Instead of having to pick a script. Anything that slows this process down means I might as well do it all by hand. What I'd really love to do is this:
Select a number of items. Right click to an action saying "create a new folder and put this items in it. Name the folder with the first item's name". Very simple and quick.
Could this be accomplished? Through Automator? or something that can appear in the contextual menu? Folder actions?
I'm just getting started with using these tools.

Can you create GS1 DataBar Expanded in LiveCycle

I have this same question in LiveCycle Design, but found it would be best here.
I have Adobe Acrobat 9 pro and was trying to create GS1 DataBar Expanded barcodes.
Since I was limited to just 3 barcode types I hit the forum and found out about LiveCycle.
Even in LiveCycle through Adobe Acrobat 9, I don't see the GS1 barcode I need.
I've tried to manipulate what is available, but that will not work.
I found a plug-in for Adobe Illustrator that has the GS1 DataBar Barcode, but Illustrator + the plug-in software is a little expensive.
My question as stated in the beginning is can you create GS1 DataBar Expanded barcode through Acrobat?
In this situation through LiveCycle? Is there a plug-in through Acrobat or LiveCycle that will include the GS1 DataBar barcode?

You can set a button to be hidden in the PDF.
And you can set a button behaviour to reveal/hide a button (rather unhelpfully described as show/hide fields).
So. Make your button with your navigation hyperlinks and set its visibility in the PDF as hidden.
Then make another button which is visible and set the action for mouse down (or mouse enter if you want it to fire on mouseover) to show fields, and select the number of your menu button from the list that is presented to you.
k

Can you create markers that pause video on a DVD using DVD studio Pro?

Similar Messages

Maybe you are looking for