Can you create this type of circle?

i am trying to make a logo and have the logo the logo surrounded by a circle.
the logo has two letters in the center and then a circle going around it.
is it possible to make the circle thickness the same as the thickness of the strokes in the letters?
how do you set the parameters for this?

Easy.
Measure the stroke width of a letter.
Maybe copy/paste part of it and use Info to find the value.
Then enter the same value as the stoke weight of the circle.
Don't forget to enter the units (cm, mm, in, pt) before you click on Return, otherwise you will get points by default which is probably not the measuring unit that you're using.

Similar Messages

  • How Can I Create This Type of Workflow?

    1. I need to create an editable workflow, for example a workflow that starts once you add  a "Ms Word" document in a folder, then the initiater gets to choose who will be the firts reviewer and the who will be the second reviewer of the
    docuemnt.
    2.  can I have my workflows in a library and applied to multiple folders, where you have different pre maid workflows to choose from and then have your work collegues choose whcih one to pick.

    The first one can be done by creating approval steps that plug into a Person/group look-up from your form.  Have SPD return this as an email address and you can fairly easily configure something that will allow your users to input thier approvers.
    I'll have a think on the second item, I think this will be harder to set-up.
    Steven Andrews
    SharePoint Business Analyst: LiveNation Entertainment
    Blog: baron72.wordpress.com
    Twitter: Follow @backpackerd00d
    My Wiki Articles:
    CodePlex Corner Series
    Please remember to mark your question as "answered" if this solves (or helps) your problem.

  • How can i create this type of texture?

    Hey
    I'm trying to replicate/create the texture in this poster. It looks to me like a fresh paint brush strokes or some plywood.
    Any help would be great thanks (:

    Mylenium is an After Effects kind of a guy, which apparently is the go to app for fractal noise, although Render Clouds and fibers are also considered to be fractal noise.  I actually tried to duplicate the texture, and while I got close, it was not close enough to put up as a suggestion.  This has a base layer of a mid green, with an overlaying layer in which I used Render Clouds with blend mode set to Vivid Light.  The trick is in selecting the right foreground and background colours, and then repeatedly using Ctrl Alt f to reapply render clouds with new random settings.
    This is the same layer with some 90° Motion blur applied, and high settings of Smart Sharpen.  Also set to Vivid Light. 
    Something else to try is adding some noise to your render clouds if you are going to use Motion blur, because it gives motion blur something to work on.  After adding the noise, you need to soften it just a tiny bit (Blur > Blur more).  Then Smart Sharpen again, but you'll need much lower settings this time.
    I know that several requests for better Photoshop fractal noise have been put on the Photoshop feedback site, but the master of this stuff is Bert Monroy, and I can't actually remember him using Render Fibers (the other noise generator along with clouds and difference clouds).  Bert tends to use noise and motion blur, because you get more predictable, and definitely more even results than from render fibers.

  • Can you do this with AE?

    I have an old highschool video where I look terrible, I was wondering since I know you can use photoshop to edit the photos (eg: remove bags from undereyes, change eye color ect..) can you do this type of stuff with after effects, and if so how? I'm thinking about purchasing it as long as it can do that type of thing.If it cant, is there any software out there that will?
    Thank you so much,
    Rachel

    Yes, you can change eye color and remove blemishes from skin with After Effects.
    There are many ways to do this sort of thing in After Effects. Here are a couple of suggestions:
    To change eye color, use the
    Change Color effect. You can use masks on an adjustment layer to isolate the areas that the effect affects. You'll probably end up playing with blending modes to blend the result in with the original.
    To remove blemishes, you can use the
    Clone Stamp tool to sample a patch of clear skin and use it over the blemish, or you might just end up changing the colors of the blemishes.
    I recommend starting by going to the
    After Effects Community Help and Support page. Work your way through the material in the "Getting started" section. Then, after you've gone through those basic materials, come back here with detailed questions.

  • How do you create THIS "grid" in Oracle Forms

    Hi,
    I am new to Forms. I have to develop a grid very similar to the one shown here.
    How can you create the grid in the bottom??
    I can't see using any of the standard Oracle toolbox items (like multi-record blocks) for this?
    Any help would be greatly appreciated.
    Thanks
    User 122...

    Hi Soofi,
    Appreciate your quick response.
    In the image, can you see a huge grid?
    Grid column headings are days of the week, Mon, Tue, Wed etc.
    Grid Rows also have names, like Room, Status and Rm. Type.
    Cells have various values in various colors (red, blue, green etc) and signs like ">>".
    Can you see that??
    My question is, how to create a grid like this in Oracle Forms??? We cannot do it using a multi record block.
    So, how have they done it??? The form in the image is an actual Oracle Form from a hotel reservation system.

  • Can you create GS1 DataBar Expanded in LiveCycle

    I have this same question in LiveCycle Design, but found it would be best here.
    I have Adobe Acrobat 9 pro and was trying to create GS1 DataBar Expanded barcodes.
    Since I was limited to just 3 barcode types I hit the forum and found out about LiveCycle.
    Even in LiveCycle through Adobe Acrobat 9, I don't see the GS1 barcode I need.
    I've tried to manipulate what is available, but that will not work.
    I found a plug-in for Adobe Illustrator that has the GS1 DataBar Barcode, but Illustrator + the plug-in software is a little expensive.
    My question as stated in the beginning is can you create GS1 DataBar Expanded barcode through Acrobat?
    In this situation through LiveCycle? Is there a plug-in through Acrobat or LiveCycle that will include the GS1 DataBar barcode?

    You can set a button to be hidden in the PDF.
    And you can set a button behaviour to reveal/hide a button (rather unhelpfully described as show/hide fields).
    So. Make your button with your navigation hyperlinks and set its visibility in the PDF as hidden.
    Then make another button which is visible and set the action for mouse down (or mouse enter if you want it to fire on mouseover) to show fields, and select the number of your menu button from the list that is presented to you.
    k

  • How to create this type of cursive font?

    Is this done with brushes?
    What would be the best way to create this type of handwritten look?
    thanks

    You could use an art brush to assign ink stroke like these to a line.
    Create a brush type shape that's in a straight horizontal line with the desired beginning, end and edges.
    Then Brushes > New Brush > Art Brush will create an art brush. (whilst the shape is selected)
    With just one brush you will be quite limited, but with a selection of brushes generated in this way you can create a selection of brushes to deal with the various requirements of building a brush font that has some integrity.
    You will find that despite automating the brush process to an extent, that to create lettering like you examples, you will have to make a lot of tweaks.

  • Can we create PUBLIC types in version 4.7

    Hello All,
    Can we create PUBLIC TYPES in in class builder in version 4.7? I know its possible in ecc 6.0. But how to do it in version 4.7??
    Thanx
    Maya.

    >
    Uwe Schieferstein wrote:
    > As a workaround you may collect your public types into a TYPE-POOL (SE11) which you then refer to in the properties section of your class.
    Hi Uwe,
    Now i understand why some of the "old" custom classes in our box used this technique instead of using "Public Types" in the Class Builder
    BR,
    Suhas

  • Can you do THIS with Captivate ? ...

    Hi,
    I'm new to Adobe Captivate and am using the 30 day trial to see if it does what I need it to do.
    I need to create a test as follows:
    60 questions, split into sections.
    I need a small button for each question, numbered 1 - 60 aligned vertically in one line down the left of the page, so there would need to be some scrolling as 60 buttons would go off the screen.
    Pushing each button would select a multiple choice question from a random pool. eg. Push button No. 5 and a random question would be there. Push 6 and there's be a different question, but if you pushed 5 again, the same question would be there as before. This enables the person being tested to skip back and fore between questions by clicking the buttons.
    There may be numerous sections to each test.
    eg.
    Car Engines
    Car Bodywork
    Steering
    Suspension etc. etc.
    So, questions 1 - 8 say may be picked randomly from the 'Car Engines' question pool.
    Questions 9 - 19 say may be picked randomly from the 'Car Bodywork' question pool. etc. etc.
    At the end of the test, I need the results to be displayed such as:
    Car Engines - 76%
    Car Bodywork - 52%  etc.
    I'd also like a simple bar chart representation if possible.
    Hope this is clear.
    I'd be very grateful if somebody could advise if this type of test scenarion can be created with Captivate.
    I'm prepared to learn to use Captivate if it can be done, but do not want to waste my time if Captivate doesn't have the capability to create this type of test.
    Grateful for any advice.

    Captivate won't give you exactly what you've described straight out of the box.  But then, neither will any other authoring tool that I'm aware of.
    Scrolling Navigation Buttons
    The Captivate screen does not scroll.  You need to think of it as being like a movie you watch on TV, not as an HTML web page.  There are widgets available to give some scrolling of text in captions, but not something that would provide navigation on each and every quiz slide with buttons to jump to any question in the quiz.
    Question Pools
    Captivate can have any number of question pools associated with a single project file, but you have to set up how many questions will come from a given pool before you publish the project. When the project loads into the user's browser, the randomisation is done to select the particular questions from each pool that will appear in the movie at runtime and is then fixed for the duration of that runtime.  You can't control it and perform more randomisation via clicking of buttons. Basically, your navigation buttons are just intended to take you to particular question slides.  Which quiz question appears on that slide at runtime is totally dependent on the randomisation done from the question pool.
    So if you have 5 question pools, each with 20 questions, but only want ten question from each pool to appear in your published project, you can easily do this with Captivate.
    NOTE: One other thing you need to be aware of is that once your user answers a question and moves off that slide, their answer will be locked and cannot be changed until the Retake the Quiz or relaunch the lesson.  So although Captivate can be configured to allow backward movement, it does not necessarily allow your user to go back and change their answers to questions previously answered.
    Quiz Results
    Captivate considers all questions or scored objects in a project file to be part of its Quiz Scope.  This scope begins on the slide containing the first scored element, and goes until the last scored element.  A project file can have only one Quiz Results slide which will show scoring data from all objects in the Quiz Scope.
    If you want to have scoring displayed separately for certain sections of your quiz (Car engines, Car bodywork, etc) you will need to use one of Captivate's more advanced techniquest using Advanced Actions and Variables.  It can be done out of the box, but it takes time to achieve the required scripting.
    Captivate does not have bar charts as standard screen objects.  Once again, you could use some fancy Advanced Actions and Variable scripting to rig up something that looked similar.  But it would take yet more time.
    I hope this helps with your decision.

  • Can you do this with ODP?

    I've got a question...
    I want to call a function with a mixture of bind parms and non-bind parms and return a refcursor. For instance,
    How would I call the following function with ODP: (BTW, I haven't compiled this so dont worry about the syntax. What I'm trying to accomplish is one round trip from the app server to the database that will return a query that is limited to the keys passed in as bind parms. Notice the join to the results table to restrict my production query to just those bind array values that are passed in after I insert them into my results table (index-organized table)). I get an error "SPECIFIED CAST IS NOT VALID" when I try to call this function with a mixture of bind parms (arrays) and non-bind parms. Can you do this? I do not see anything in the pdf file on the ODP documentation that says you cannot. but I'm thinking because you set the command.ArrayBindCount property to the number of things in your array, that this applies to ALL of the parms? Is that true? Any workarounds?
    Thanx
    Frank
    CREATE OR REPLACE PACKAGE mypkg IS
    TYPE RefCursor IS REF CURSOR;
    FUNCTION myExport(keyid_in IN VARCHAR2
    ,where_clause_in IN VARCHAR2
    ,sessionid_in IN VARCHAR2
    ,key_nbr_in IN NUMBER
    ,key_flag_in IN CHAR
    ,key2_in IN NUMBER
    ,key2_flag_in IN CHAR) RETURN RefCursor;
    END mypkg;
    SHOW ERRORS;
    CREATE OR REPLACE PACKAGE BODY mypkg IS
    FUNCTION myExport(keyid_in IN VARCHAR2
    ,where_clause_in IN VARCHAR2
    ,sessionid_in IN VARCHAR2
    ,key_nbr_in IN NUMBER
    ,key_flag_in IN CHAR
    ,key2_nbr_in IN NUMBER
    ,key2_flag_in IN CHAR) RETURN RefCursor IS
         myCur RefCursor;
    BEGIN
    -- This is not a bind parm, but one string value, not an array!
         DELETE FROM session_results WHERE sessionid = keyid_in;
    -- These are bind parms that will insert N records into my results table
    INSERT INTO results VALUES(sessionid_in
    ,key_nbr_in
    ,key_flag_in
    ,key2_nbr_in
    ,key2_flag_in);
         COMMIT;
         OPEN myCur FOR
    SELECT table1.key_nbr
    ,table1.key_flag
    ,table2.key2_nbr
    ,table2.key2_flag
    FROM table1
    ,results
    ,table2
    WHERE results.sessionid = keyid_in
    AND table1.key_nbr = sresl.key_nbr
    AND table1.key_flag = sresl.key_flag
    AND table1.key_nbr = table2.key_nbr
    AND table1.key_flag = table2.key_flag
    and table2.key_nbr = results.key2_nbr
    and table2.key_flag = results.key2_flag;
         RETURN(myCur);
    END myExport;
    END mypkg;
    SHOW ERRORS;

    Please correct me if my understanding is not correct but I believe your questions is whether one parameter can be an array bind while another is a non-array bind in a single stored procedure execution. If that is your question, the answer is no. All parameters must be either bound as an array or not bound as an array. There cannot be a mix.

  • Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it?

    Trying to drag pdf files i have and combine them into one pdf file in the account i just purchased with Adobe. when i drag a pdf file over Adobe doesn't accept it. says it can not convert this type of file. but it is an Adobe file. Do I need to change it in some other form befor dragging it?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • Can you create apps after 1st May 2015 using Adobe DPS single edition?

    Can you create apps after 1st May 2015 using Adobe DPS single edition?
    I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
    Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???

    Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
    So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' -  even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
    Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something?

  • HT4191 iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.

    iPhone Local Storage "My iPhone" - How do you create this folder for use by the Notes app on a iPhone or iPad?  If I want to keep some notes only on my device and not in a cloud environment associated with an e-mail account.  I've seen reference to the  "My iPhone" local storage put no mention on how you create this folder or access this folder within the Notes app.  I realize storing information in a local storage like this provides no syncing between other iDevices but that is exactly what I'm looking for.  I'm running iOS7.0.4 on a iPhone 5S, and a iPad Air.  Any help would be greatly appreciated.

    If you go to Settings > Notes > Default Account you will see "On My iPhone" as the default account and the only choice if you have not enabled syncing Notes in Settings >iCloud or Settings > Mail, Contacts, Calendars. If you have enabled syncing you can still select "On My iPhone" as the default account. When you are in the Notes app you won't see any accounts listed if you have not enabled syncing because they are all in the On My iPhone account and that is the only place possible. It is not a folder that you create.

  • How can you create a spry menu bar with no background colour?

    How can you create the first level of a spry menu bar to have no colour? I have a coloured background right now and the colour matches when you load the site in Internet explorer but does not match in Firefox. Any suggestions are welcomed on how to fix this.
    Thanks!
    HK

    Here is the site:
    http://partnersnaturally.ca/
    I am learning with code, (obviously) so any feedback would be nice. I use dreamweaver CS4, but when I originally designed the site it was in a much older version of dreamweaver. I wonder if that could also be a cause. (besides human error)
    Thanks again,
    HK

  • How can you create a writable PDF document from a PPT presentation ?

    How can you create a writable PDF document from a PPT presentation ? Upper part with the image , lower part with a free space in order to take notes for students during presentation or course.
    Thanks.
    B

    You can make a PDF file out of you notes and handouts but using the Adobe PDF printer.
    Open your PowerPoint Document then go to “File” “Print”
    Select ‘Adobe PDF” Printer
    Under slides, select which way you want to print. Note it will not print to a printer but to a PDF file.
    After then go into printer Properties and Setup PDF properties, do the following: (see second image below)
    Default: PDF/A 1-b
    Adobe Security: none (change as needed)
    Adobe Output folder: Prompt for Adobe file name
    Adobe Page size: Letter (change as needed)
    Check the following check boxes
    View Adobe PDf Results,
    Add Document Information,
    Rely on system fonts only,
    Delete Log files for successful jobs.
    Select OK
    A pop will ask you where you want to save the document. The file extension should be PDF. After giving the file name select okay and the file should popup as a PDF. Down side is if you want to speaker notes included then you will have to do another file, like wise with just screen shots then combine into one PDF document.
    I used Acrobat IX Pro. So to do this you need Acrobat IX or X Pro.
    Hope this will help.
    Tiger26

Maybe you are looking for