Can you customize individual slides in a slideshow?

I'm just now trying to create a slideshow in LR4 for a client, and am trying to figure out (banging my head against a wall) how to customize each individual slide. I'd like each slide to have the image positioned in a different location - not all centered, not all placed to the left, and not all placed to the right (i.e. the first one on the left side, the second one in the middle, the third one on the right, the fourth one centered, etc.). Can this be done hopefully? I have spent hours today looking at adobe, youtube, etc. trying to find the answer. I don't think it's possible, and if not, I think it needs to be changed in future versions of LR.

Nope ... unfortunately the Slideshow module is a pure vanilla presentation ... all images centered, no panning or zoom, one audio file, one transition ... just the basics ...
I also wouldn't hold out any hope for improvements in the near future ... the Slideshow module has went relatively untouched since it was first introduced in 2006 ... it is what it is ... which is not much of an asset at all ...

Similar Messages

How can you save keynote slides as high resolution (300 dpi) images?

Apparently there is a way to save powerpoint slides as 300 dpi images, with some finagling, but not the mac version. Does anyone know how to do this in keynote? Or is there a relativley easy way to do it with free/cheap software? I can increase the dpi in photoshop, but it doesn't produce crisp images for obvious reasons.

how can you save keynote slides as high resolution (300 dpi)
to save individual images from each slide in Keynote;     file > export > images > TIFF (for optimum quality)
You are using the wrong terminology to describe creating an image file
- dpi ( meaning dots per inch ) is the measurement used in printing to create the number of print dots per inch that will be deposited on to physical media like paper or film   This is done in the printer settings box of the print driver and is dependant on how the individual printer can print..
ppi ( meaning pixels per inch ) is the measurement you need to use when creating the number of pixels in a digital image file. You establish image resolution in Keynote using the inspector;
Keynote > inspector > document > slide size
I can increase the dpi in photoshop, but it doesn't produce crisp images for obvious reasons.
You can resample images in editing applications such as Photoshop or Painter but what you are doing is adding non image information to the image to increase pixel count, this is called noise. As you state this is not the procedure to use in your situation.

Can you customize what folder MAIL goes to when adding attachments?

Can you customize what folder MAIL goes to when adding attachments?
My friend has 2 email addresses for businesses.
He has invoices in folders for both, and wants to set up the Mac like this:
When he writes from one email address and attaches documents - he want the Mac always to go to the corresponding folder for that company of his. Same for the other email address...
Make sense?
Can this be done?
Thanks in advance....

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Can you have two slides shows on the one interactive page?

I'm just new at learning interactive pdfs in indesign so sorry if this is common knowledge. I know how to create a slide show on a page, but can you have two slide shows on the one page or more for that matter? (Ideally I need 3.) Each slide show has its own set of images and buttons.

Just :http://www.youtube.com/watch?v=Dm0aeMUPZ4U
But I'm happy to create them a different way if needed be.

Can you buy a slide out keyboard case for the six plus? Like you can for the 6.

can you buy a slide out keyboard case for the 6 plus?

There are 2 separate issues here:
- The Apple 30 pin to USB cable was redesigned to remove the 2 button squeeze feature pricesley because of your issue with the buttons falling off and consumers being unable to disconnect the cords. The newly redesigned cable removes these 2 side buttons for a shorter 30 pin connector that will work just fine in Apple devices. If there is an ergonomic reason for wanting the larger 2 button design you can buy a host of 3rd party Apple 30 pin to USB cables on the market. http://store.apple.com/us/product/MA591G/C/apple-30-pin-to-usb-cable?fnode=3a
http://www.amazon.com/AmazonBasics-Meter-Charging-Cable-iPhone/dp/B004SBBD8U/ref =sr_1_5?s=pc&ie=UTF8&qid=1370983635&sr=1-5&keywords=30+pin+apple+usb - 3rd party Apple 30 pin USB cable that should replace the functionality you are looking for.
- The issue of your iPad reporting that it isn't charging is a DIFFERENT issue. Your USB cable is FINE. The reason you are getting this message is beacuse the Power Adaptor that the USB cable plugs into isn't providing enough electrical juice. If you are plugging your USB cable into your PC it might not be getting enough power. If you are plugging it into your iPhone Power Adaptor (5W) it isn't strong enough to charge your iPad with it on (it will trickle charge if you have your iPad off). What you need is the Apple 12W charger for iPad. Your original power adapter that came with you iPad 2 was a 10W charger that Apple no longer sells. Make sure the USB cable you are using it plugged into either a 10W or 12W power adapter! http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/power
Tech speak if interested: the 12W charger uses the USB cable to detect which iPad is connected and gives it 1 AMP for iPhone, 2.1 AMP for iPad 1,2 & Mini and 2.4 AMP for iPad 3&4.

How much can you customize Professional level storefronts?

I know that you need to be an Enterprise user to have completely customized storefronts, but how much can you customize Professional user storefronts? What do they look like? Most magazines I've seen are Enterprise level

With a Professional account, you cannot customize the storefront. If you create a subscription app, you can specify subscription tiles and indicate with subscription durations are available, but that's about it.

How do you add new slides to a slideshow?

As the title says...
The slideshow templates in Muse only let you edit 3 slides, and I need at least 6. But I can't find how to add more even in the "blue arrow pop-up menu".

You can click the 'add images' button to select additional images for your slideshow.

How can I remove type slides from a slideshow?

I have been working on this project for several days. When I insert a type slide into the slideshow it appears in the string of thumbnails above the show. Once I play the slideshow, however, the type slide starts to repeat somewhat randomly sometimes up to five times in a row in places where it was not inserted by me. I can't use "remove from slideshow" because the additional type frames do not appear in the thumbnails at the top, and I can't use the command while the show is running. Is my software corrupted? Anybody else ever have this problem? I have tried removing the type slide I can see from the string, but the "ghost" type frames continue to appear.

First make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that doesn't help apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

With Reports 10G can you customize you message and stop formatting?

Oracle, states to come here for answer. they said, OTN should be able to help.
If any one knows how this can be done can you please help me out?
thanks,
We were told this was fixed with 10G so we upgraded to 10G. We have a
report and we want it to execute if it's less than 10 records if not we want a
message to come up that the report needs to be scheduled.
Well we run the report and it displays exceeded record count but the format
still runs so no time saved on the web.
If the record count was exceeded we want to HALT the system and not go any
farther.
Now if we could modify the system message 1825 we would be o.k. But we don't
know if that is going to work. If we could change the message we would be
o.k. with that. that would mean changing the system codes though.
### How is the Report being called (Command line, URL or via Oracle Forms): ###
If false comes back in the beginning then we don't want any report formatting
to be done. Right now the format is done it seems but no data is displayed
because criteria isn't met.
So we dont wnat the formatting to be run when criteria isn't met. But for
some
reason it still runs and takes time.
See we have some reports on the web that can only be ran by date range right
now the clients can only run the reports for a 6 months range.. Well some
clients have a lot smaller record count. So we want to change the way the
reports are ran to a records count. If the count is large than said amount
then a message comes up that states the report has to be scheduled. If the
amount is under said amount then the report runs.
So at this time in the report we do a count then we move onto will the report
run or not if over the amount we want to abort the process but we don't want
the client to see the abort. We definately don't want the client to sit and
wait for the format to run when NO Data is to be returned.
### Error messages and error scenario: ###
So what we want is too see a message "Schedule the report count exceeded" and
NO formatting done. If under amount we want the report to run.
### Provide a detailed step-by-step description of your problem or question: ###
Or is there a way to customize the messages the client / users will see. And
no formatting time for no records returned.
Contact me via : E-mail -> [email protected]
Text continued in next action...
20-SEP-04 18:39:53 GMT
Text continued from previous action...
20-SEP-04 19:18:51 GMT
New info : Is there a way if the error messages have to come up that we can
hide the message or have another screen cover that error message something to
cover the message so that the user doesn't see the error message.
20-SEP-04 19:30:23 GMT
Hi Darlene,
Thank you for using MetaLink. Iam currently working on a very critical issue.I shall review/research your issue at the earliest opportunity and w
ill update the SR / call you as soon as we have relevant information. Thank you
for your patience.
Best Regards,
Seema,
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
20-SEP-04 19:30:30 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 00:32:18 GMT
Hi Darlene!
If you are calling the report from a form, try using the EXIT_FORM line in your code.
Thanks and Regards,
Seema
21-SEP-04 00:33:01 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 14:09:20 GMT
New info : We will try it and let you know.
21-SEP-04 14:19:04 GMT
New info : We are not calling the report from a form so this won't work. Any
other way. We are needing to do this badly.
21-SEP-04 14:39:06 GMT
New info : Can I get detailed steps about how to customize the system message
or hide the message when we abort the report?
21-SEP-04 15:38:39 GMT
Hi Darlene!!
As talked to you on phone, here are the steps for you to try.
The below has been run as a test case using emp table in scott schema of a database
1) create a summary coloumn say cs_1 in the data model.
2) point the function to count.
3) Point the source to what ever's count you want it to be pointed to(say empno of emp table of
scott schema)
4) create a user parameter say NO_ROWS
5) in its property palette make its data type number and initial value as 1
6) I had teh following query for my report:
select empno, ename from emp
where rownum <= :no_rows
This means that the report that will be generated will consist of a total no of NO_ROWS(that we
shall be specifying at run time). The before report trigger(mentioned in 7 below) shall assure
that whenever we specify NO_ROWS greater than 5 then the report will display a customized pop up
message.
7) create a before report trigger as:
function BeforeReport return boolean is
user_excp EXCEPTION;
begin
if :cs_1 >5 then
raise user_excp;
return (false);
else
return true;
end if;
EXCEPTION
WHEN user_excp then
SRW.MESSAGE(30, 'Data is more please schedule this report:');
raise SRW.PROGRAM_ABORT;
return (false);
end;
This way when u run a report, an argument is asked whether how many rows do you want to be
displayed as in the parameter NO_ROWS. then you specify the number. If that number is greater
than 5(in this case, due to if :cs_1 > 5 then....) then it will pop up a message saying "Data is
more please schedule this report:"
In case you do not want to specify NO_ROWS..then you need not put that and modify the report
query as "select empno, empname from emp;" i.e. without where clause.
21-SEP-04 16:49:30 GMT
New info : we will try this then update the TAR.
21-SEP-04 16:58:09 GMT
ok you update the tar when you try the above steps.
STATUS:
@CUS
23-SEP-04 02:16:00 GMT
New info : Information from the person that did this suggestion step by step.
I tried this step by step, but unfortunately, it doesn't work the way we want.
First with this suggestion, the user needs to choose how many records they
want
to get, or we default a number of records, in order to run the report. The most
important thing is, whenever you specify the statement return false or raise
SRW.PROGRAM_ABORT in the before report trigger, the system message will pop up.
I really hope that people from Oracle would let us know how to customize the
system message or hide it.
23-SEP-04 14:23:04 GMT
New info : I just thought that we have some sort of message, which I guess is
from the database, when we do claim search on client inquiry. I am just
wondering if we could try the same thing to the report.
The some sort of message looks like this on dev box:
Your search exceeded 5000 records and will surpass the capabilities of this
connection. Please narrow the search criteria and resubmit.
It's just a thought, not sure if it's going to work.
When could we have the DBA Make this change. The servlet.properties???
23-SEP-04 17:30:55 GMT
REQUESTED INFORMATION PROVIDED
===============================
Hi Darlene,
Thank you for providing the requested information. I am currently reviewing/resea
rching the situation and will update the TAR / call you as soon as I have additi
onal information. Thank you for your patience.
Best regards,
Ajit
STATUS
=======
@WIP -- Work In Progress
23-SEP-04 18:04:31 GMT
UPDATE
=======
Hi Darlene,
We cannot modify the system messages nor do I think there is a method to hide the system message. The message that was coming is
due to the raise srw.program_abort command, which is the element through which
we can abort the program.
Thanks
Best Regards
Ajit
@CUS
23-SEP-04 18:29:26 GMT
New info : Can you please look into a way that we can get something to work?
23-SEP-04 18:49:28 GMT
Hi Darlene,
I am sorry to say that but I don't think there is any any workaround to this because the system message is what is generated by the oracle reports i
nternally. Still if you wish you may refer to the otn discussion forum which is
maintained by teh product management group and post a new thread on it. the link
to the forum is Reports
Also since nothing can be done on our side I don't see any reason to keep this TAR open an
d if you wish we can soft close this.
Thanks
Regards
Ajit.
New info : Shouldn't there always be a way to do something? I don't understand
why we were told in 10G that this could be done and now we are told it can't.

K T wrote:
Yep - not nice...unless you do a TE 'Get Info' in the Finder and √ the 'Open in 32-bit mode' box and try again...then, all seems well in snow leopard land.
Really? I figure since I have a Core Duo chip, everything always opens in 32-bit mode. In any case, I did file a bug report and will give your suggestion a try later today.

Can you put a link in a Slideshow for muse?

I'm making my images for my muse homepage main slideshow in photoshop.
How can I create a link on a slideshow image, without it appearing on top of all the other pictures through the slideshow?
Thankyou,
KM

By creating a link, I believe you want to hyperlink image where users when click on the image should be directed to linked page ?
You can select the hero image in slideshow and then insert link via hyperlink.
If you are referring to a text showing link with image then you would need to use a composition and insert text in container along with image.
Thanks,
Sanjit

Metadata - Issue Can You Customize Apertures Metadata to work with Bridge

I am a photographer and my workflow is to import all my images into Aperture library and add metadata. When exporting image is it possible to integrate the data with Bridge? This is important feature as most people do not import images with Aperture. The issue is that many of the field names are different or non existent between the two programs. For example Location in Bridge is Sub location in Aperture. Can you add contact info such as URL, email that are included within Bridge?
Is there a way to customize the metadata fields to work with CS3?
Any advise is greatly appreciated
Message was edited by: Keith254
Message was edited by: Keith254

Hello Dhruser1,
I think that the DAQmx Perform Bridge Offset Nulling Calibration should work for the SCC-SG24 module. Take a look at this article: Removing Large Initial Offset for Load Cell or Strain Measurements with SCXI-1520 or PXI-4220 in particular it mentions that using this VI in addition to the auto zero can introduce an offset. If you're doing both these is likely the cause.
Also, when you specify specific channels using the channels input are you also setting the "skip unsupported channels to false? If not this may be why it affects other channels.
I hope this helps, and if not please feel free to post back with an update after trying these things.
Cheers,
Brooks

Can you customize an Indicator/Control shape?

Hello everyone,
This is a question that has puzzled me for a long time. Is it possible to make an indicator/control any shape other than a rectangle? I am well aware of creating custom controls and using .pngs as a method of making controls appear irregular shaped by using transparency, but you can still click on the transparent parts and have it register as a click on the control. I want to be able to define the actual edge of the control as something irregular. My end goal is to fit many of these controls together like a puzzle, and I don't want to be clicking on the wrong piece because the transparent corners of one control overlap the other.
I put together an extreme example to illustrate my point.
The image below shows the border of a custom indicator:
If I put a blue indicator of the same type next to it you will see that the transparent border of the red shape blocks the blue shape and it is now impossible to click on the blue shape.
What I would like to be able to do is make a border (not rectangular) that hugs the exact shape of the indicators. Like I said, this is obviously an extreme example, but hopefully you see what I'm talking about.
I have searched around the forums and the internet for a solution and I have not found anything, leading me to believe that it might not be possible. But, as no one has actually said it's impossible, I'm still hopeful.
My one glimmer of hope is that some of the Boolean controls are truly round and maybe there is a way to apply this to a custom control.
Thanks in advance,
-Aaron

Yes and no (very helpful, I know).
Yes, it can be done - the graphics are drawn using both vector and bitmapped images. The vector format allows you to create shaped controls. You can see this if you customize the control and replace the image with something from the decorations palette.
The problem, however, is that the vector format (called PICC) is proprietary. There are no tools available for editing it and, if memory serves, any vector graphic you will import from outside LV (such as EMF and WMF, which are supported) will not give you that specific behavior (although I suggest you do try it with a proper program, as opposed to PowerPoint, which is what I usually use, as it might work).
What some people do to work around this is use a picture control to draw up the graphics, then analyze where the clicks were using a Mouse Down event and some logic. If you want to simplify your logic, let each block have a distinct color. You can then just look at the color of the pixel which was clicked and use a lookup table to determine which block has that color.
Try to take over the world!

Can you customize Photoshop Elements 7 menu

I just bought Photoshop Elements 7 and am trying to find out how much I can customize the workspace.
Can you add buttons to the toolbar or menu bar for frequently used menu commands?

Thanks Swarnima.
The link is helpful. Was hoping I could actually add buttons.
I appreciate your help.

Can you resize a slide without resizing text?

When I try to lengthen my slide, Keynote resizes all of my text, horribly distorting the layout. Is there a way to prevent Keynote from doing this?

Michael,
I've been trying to replicate your problem without success.
Would you please tell us what you mean by "lengthen" or send an image of your distorted slide?
Normally, to change the size of a slide you use the Document Inspector > Slide Size and Select from available options. Even if you customize the dimensions, the text is usually well behaved.

Random changes when changing setting for individual slide in a slideshow

I've used iPhoto for years and produced many slideshows. However, now when I try to use Ken Burns Effect for an individual slide, I click on the "start" area, adjust my slide, click on "end," and then iPhoto jumps to a totally different slide in the slideshow. When I go back to the slide I wanted to work with, nothing was saved, and the same random change of picture happens.
Actually, the Ken Burns Effect hasn't worked correctly on ANY slide I've tried.
Also, when I try to rearrange the slide order, the slides may stay in the correct order for a few seconds, but then a slide may jump four slides to the right (and again out of order). This behavior is strange and random. It is infuriating and I don't know what to do.
Any help would be greatly appreciated.
ALSO, when I export a slideshow with music, the song plays fine for a few minutes, but then another song starts and the two songs are playing on top of each other (actually, it may be the same song playing over itself too).
What gives?!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
Regards
TD

Can you customize individual slides in a slideshow?

Similar Messages

Maybe you are looking for