Can you customize Password Reset Results?

We're migrating our password management stuff into Identity Manager, and one of the nicer features we've got with our current (home-rolled) setup is that after a Help Desk worker resets someone's password, it gives them a nice page that can be printed out and handed to the person to take with them.
The default password reset page in Identity Manager does print out the password, but I don't see what form I would use to customize that results page. (admin/resetUserPasswordResults.jsp). Does anyone know where to look?
Thanks!
Jonathan

I am having problems in displaying the new password. I want to use a custom password policy to generate the new password. I call a custom reset password workflow, and pass that policy to it. It generates two diff password. one for IdM and one for LDAP. I want it to generate one password for both

Similar Messages

  • Can you customize what folder MAIL goes to when adding attachments?

    Can you customize what folder MAIL goes to when adding attachments?
    My friend has 2 email addresses for businesses.
    He has invoices in folders for both, and wants to set up the Mac like this:
    When he writes from one email address and attaches documents - he want the Mac always to go to the corresponding folder for that company of his. Same for the other email address...
    Make sense?
    Can this be done?
    Thanks in advance....

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Equium A200 - Can't make password reset disk on CD

    W/Vista, Pioneer DVD-RW
    Can't make password reset disk on CD, all I get is - This feature requires removable media, such as floppy drive or USB flash drive.
    Are CD's or DVD's not classed as removable media now?
    In help and support it states - you'll need _removable media_ such as a USB flash drive or _CD_..
    Any help on this would be appreciated.

    Are CD's or DVD's not classed as removable media now?
    In my opinion it is the question for Microsoft because you try to use Vista feature and, as far as I know, notebook manufacturers have nothing to do with it.
    To be honest for me it is pretty logic. If you want to use such disc it should be small and compact. The best disc for these purposes is USB memory stick. You can put it in every pocket and have with you.
    In my opinion CD media is not so adequate for this. What you think about it?

  • Can you filter iTunes search results by video or audio podcasts?

    I have been searching for hours and haven't found a definite answer. Anyone know if this is possible?
    Can you filter iTunes search results by video or audio podcasts?

    I'm having the same problem. I go to Podcasts/Video Podcasts/News and they only give the featured, favorites (whose?), etc. I want to see all video news podcasts but if I then click on see all, it drops the video classification and shows all news podcasts. The iTunes search in general leaves a lot to be desired; its not very intuitive or pleasant to use, not the usual Apple experience.

  • How much can you customize Professional level storefronts?

    I know that you need to be an Enterprise user to have completely customized storefronts, but how much can you customize Professional user storefronts? What do they look like? Most magazines I've seen are Enterprise level

    With a Professional account, you cannot customize the storefront. If you create a subscription app, you can specify subscription tiles and indicate with subscription durations are available, but that's about it.

  • Can you print password protected pdfs from an ipad?

    can you print password protected pdfs from an ipad?

    This may help, but I do note that the printer you state is NOT on the airprint list. You may need to go to the app store and see if Canon has an app that will facilitate printing on a non AirPrint device.
    http://support.apple.com/kb/HT4356

  • HT5787 I can't receive password reset email!

    I can’t receive password reset email. Probably because this email address has been used before as second email to another Apple ID. I removed it from the other Apple ID a week ago but still can’t receive reset email.

    Go to https://expresslane.apple.com ; select 'More Products and Services', then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.

  • With Reports 10G can you customize you message and stop formatting?

    Oracle, states to come here for answer. they said, OTN should be able to help.
    If any one knows how this can be done can you please help me out?
    thanks,
    We were told this was fixed with 10G so we upgraded to 10G. We have a
    report and we want it to execute if it's less than 10 records if not we want a
    message to come up that the report needs to be scheduled.
    Well we run the report and it displays exceeded record count but the format
    still runs so no time saved on the web.
    If the record count was exceeded we want to HALT the system and not go any
    farther.
    Now if we could modify the system message 1825 we would be o.k. But we don't
    know if that is going to work. If we could change the message we would be
    o.k. with that. that would mean changing the system codes though.
    ### How is the Report being called (Command line, URL or via Oracle Forms): ###
    If false comes back in the beginning then we don't want any report formatting
    to be done. Right now the format is done it seems but no data is displayed
    because criteria isn't met.
    So we dont wnat the formatting to be run when criteria isn't met. But for
    some
    reason it still runs and takes time.
    See we have some reports on the web that can only be ran by date range right
    now the clients can only run the reports for a 6 months range.. Well some
    clients have a lot smaller record count. So we want to change the way the
    reports are ran to a records count. If the count is large than said amount
    then a message comes up that states the report has to be scheduled. If the
    amount is under said amount then the report runs.
    So at this time in the report we do a count then we move onto will the report
    run or not if over the amount we want to abort the process but we don't want
    the client to see the abort. We definately don't want the client to sit and
    wait for the format to run when NO Data is to be returned.
    ### Error messages and error scenario: ###
    So what we want is too see a message "Schedule the report count exceeded" and
    NO formatting done. If under amount we want the report to run.
    ### Provide a detailed step-by-step description of your problem or question: ###
    Or is there a way to customize the messages the client / users will see. And
    no formatting time for no records returned.
    Contact me via : E-mail -> [email protected]
    Text continued in next action...
    20-SEP-04 18:39:53 GMT
    Text continued from previous action...
    20-SEP-04 19:18:51 GMT
    New info : Is there a way if the error messages have to come up that we can
    hide the message or have another screen cover that error message something to
    cover the message so that the user doesn't see the error message.
    20-SEP-04 19:30:23 GMT
    Hi Darlene,
    Thank you for using MetaLink. Iam currently working on a very critical issue.I shall review/research your issue at the earliest opportunity and w
    ill update the SR / call you as soon as we have relevant information. Thank you
    for your patience.
    Best Regards,
    Seema,
    Oracle Support Services
    STATUS
    =======
    @WIP -- Work In Progress
    20-SEP-04 19:30:30 GMT
    Email Update button has been pressed: Sending email to [email protected]
    21-SEP-04 00:32:18 GMT
    Hi Darlene!
    If you are calling the report from a form, try using the EXIT_FORM line in your code.
    Thanks and Regards,
    Seema
    21-SEP-04 00:33:01 GMT
    Email Update button has been pressed: Sending email to [email protected]
    21-SEP-04 14:09:20 GMT
    New info : We will try it and let you know.
    21-SEP-04 14:19:04 GMT
    New info : We are not calling the report from a form so this won't work. Any
    other way. We are needing to do this badly.
    21-SEP-04 14:39:06 GMT
    New info : Can I get detailed steps about how to customize the system message
    or hide the message when we abort the report?
    21-SEP-04 15:38:39 GMT
    Hi Darlene!!
    As talked to you on phone, here are the steps for you to try.
    The below has been run as a test case using emp table in scott schema of a database
    1) create a summary coloumn say cs_1 in the data model.
    2) point the function to count.
    3) Point the source to what ever's count you want it to be pointed to(say empno of emp table of
    scott schema)
    4) create a user parameter say NO_ROWS
    5) in its property palette make its data type number and initial value as 1
    6) I had teh following query for my report:
    select empno, ename from emp
    where rownum <= :no_rows
    This means that the report that will be generated will consist of a total no of NO_ROWS(that we
    shall be specifying at run time). The before report trigger(mentioned in 7 below) shall assure
    that whenever we specify NO_ROWS greater than 5 then the report will display a customized pop up
    message.
    7) create a before report trigger as:
    function BeforeReport return boolean is
    user_excp EXCEPTION;
    begin
    if :cs_1 >5 then
    raise user_excp;
    return (false);
    else
    return true;
    end if;
    EXCEPTION
    WHEN user_excp then
    SRW.MESSAGE(30, 'Data is more please schedule this report:');
    raise SRW.PROGRAM_ABORT;
    return (false);
    end;
    This way when u run a report, an argument is asked whether how many rows do you want to be
    displayed as in the parameter NO_ROWS. then you specify the number. If that number is greater
    than 5(in this case, due to if :cs_1 > 5 then....) then it will pop up a message saying "Data is
    more please schedule this report:"
    In case you do not want to specify NO_ROWS..then you need not put that and modify the report
    query as "select empno, empname from emp;" i.e. without where clause.
    21-SEP-04 16:49:30 GMT
    New info : we will try this then update the TAR.
    21-SEP-04 16:58:09 GMT
    ok you update the tar when you try the above steps.
    STATUS:
    @CUS
    23-SEP-04 02:16:00 GMT
    New info : Information from the person that did this suggestion step by step.
    I tried this step by step, but unfortunately, it doesn't work the way we want.
    First with this suggestion, the user needs to choose how many records they
    want
    to get, or we default a number of records, in order to run the report. The most
    important thing is, whenever you specify the statement return false or raise
    SRW.PROGRAM_ABORT in the before report trigger, the system message will pop up.
    I really hope that people from Oracle would let us know how to customize the
    system message or hide it.
    23-SEP-04 14:23:04 GMT
    New info : I just thought that we have some sort of message, which I guess is
    from the database, when we do claim search on client inquiry. I am just
    wondering if we could try the same thing to the report.
    The some sort of message looks like this on dev box:
    Your search exceeded 5000 records and will surpass the capabilities of this
    connection. Please narrow the search criteria and resubmit.
    It's just a thought, not sure if it's going to work.
    When could we have the DBA Make this change. The servlet.properties???
    23-SEP-04 17:30:55 GMT
    REQUESTED INFORMATION PROVIDED
    ===============================
    Hi Darlene,
    Thank you for providing the requested information. I am currently reviewing/resea
    rching the situation and will update the TAR / call you as soon as I have additi
    onal information. Thank you for your patience.
    Best regards,
    Ajit
    STATUS
    =======
    @WIP -- Work In Progress
    23-SEP-04 18:04:31 GMT
    UPDATE
    =======
    Hi Darlene,
    We cannot modify the system messages nor do I think there is a method to hide the system message. The message that was coming is
    due to the raise srw.program_abort command, which is the element through which
    we can abort the program.
    Thanks
    Best Regards
    Ajit
    @CUS
    23-SEP-04 18:29:26 GMT
    New info : Can you please look into a way that we can get something to work?
    23-SEP-04 18:49:28 GMT
    Hi Darlene,
    I am sorry to say that but I don't think there is any any workaround to this because the system message is what is generated by the oracle reports i
    nternally. Still if you wish you may refer to the otn discussion forum which is
    maintained by teh product management group and post a new thread on it. the link
    to the forum is Reports
    Also since nothing can be done on our side I don't see any reason to keep this TAR open an
    d if you wish we can soft close this.
    Thanks
    Regards
    Ajit.
    New info : Shouldn't there always be a way to do something? I don't understand
    why we were told in 10G that this could be done and now we are told it can't.

    K T wrote:
    Yep - not nice...unless you do a TE 'Get Info' in the Finder and √ the 'Open in 32-bit mode' box and try again...then, all seems well in snow leopard land.
    Really? I figure since I have a Core Duo chip, everything always opens in 32-bit mode. In any case, I did file a bug report and will give your suggestion a try later today.

  • Metadata - Issue Can You Customize Apertures Metadata to work with Bridge

    I am a photographer and my workflow is to import all my images into Aperture library and add metadata. When exporting image is it possible to integrate the data with Bridge? This is important feature as most people do not import images with Aperture. The issue is that many of the field names are different or non existent between the two programs. For example Location in Bridge is Sub location in Aperture. Can you add contact info such as URL, email that are included within Bridge?
    Is there a way to customize the metadata fields to work with CS3?
    Any advise is greatly appreciated
    Message was edited by: Keith254
    Message was edited by: Keith254

    Hello Dhruser1,
    I think that the DAQmx Perform Bridge Offset Nulling Calibration should work for the SCC-SG24 module.  Take a look at this article:  Removing Large Initial Offset for Load Cell or Strain Measurements with SCXI-1520 or PXI-4220 in particular it mentions that using this VI in addition to the auto zero can introduce an offset.  If you're doing both these is likely the cause.
    Also, when you specify specific channels using the channels input are you also setting the "skip unsupported channels to false?  If not this may be why it affects other channels.
    I hope this helps, and if not please feel free to post back with an update after trying these things.
    Cheers,
    Brooks

  • Can you customize an Indicator/Control shape?

    Hello everyone,
    This is a question that has puzzled me for a long time. Is it possible to make an indicator/control any shape other than a rectangle? I am well aware of creating custom controls and using .pngs as a method of making controls appear irregular shaped by using transparency, but you can still click on the transparent parts and have it register as a click on the control. I want to be able to define the actual edge of the control as something irregular. My end goal is to fit many of these controls together like a puzzle, and I don't want to be clicking on the wrong piece because the transparent corners of one control overlap the other.
    I put together an extreme example to illustrate my point.
    The image below shows the border of a custom indicator:
    If I put a blue indicator of the same type next to it you will see that the transparent border of the red shape blocks the blue shape and it is now impossible to click on the blue shape.
    What I would like to be able to do is make a border (not rectangular) that hugs the exact shape of the indicators. Like I said, this is obviously an extreme example, but hopefully you see what I'm talking about.
    I have searched around the forums and the internet for a solution and I have not found anything, leading me to believe that it might not be possible. But, as no one has actually said it's impossible, I'm still hopeful. 
    My one glimmer of hope is that some of the Boolean controls are truly round and maybe there is a way to apply this to a custom control.
    Thanks in advance,
    -Aaron

    Yes and no (very helpful, I know).
    Yes, it can be done - the graphics are drawn using both vector and bitmapped images. The vector format allows you to create shaped controls. You can see this if you customize the control and replace the image with something from the decorations palette.
    The problem, however, is that the vector format (called PICC) is proprietary. There are no tools available for editing it and, if memory serves, any vector graphic you will import from outside LV (such as EMF and WMF, which are supported) will not give you that specific behavior (although I suggest you do try it with a proper program, as opposed to PowerPoint, which is what I usually use, as it might work).
    What some people do to work around this is use a picture control to draw up the graphics, then analyze where the clicks were using a Mouse Down event and some logic. If you want to simplify your logic, let each block have a distinct color. You can then just look at the color of the pixel which was clicked and use a lookup table to determine which block has that color.
    Try to take over the world!

  • Can you customize Photoshop Elements 7 menu

    I just bought Photoshop Elements 7 and am trying to find out how much I can customize the workspace.
    Can you add buttons to the toolbar or menu bar for frequently used menu commands?

    Thanks Swarnima.
    The link is helpful. Was hoping I could actually add buttons.
    I appreciate your help.

  • Customize Password Reset Portal -linebreaks

    Hi
    I need to display password policy in text to the user when he enters a new password in SSPR. Is it possible to get line breaks in the text that is put inside the value tag? Or can I do it anotherway? 
    <data name="FinishingDescription" xml:space="preserve">
        <value> Some text </value>
    /Mikael

    Hi,
    I had the same requirement in one of My earlier projects and I tried everything to add new line or <br/> tags but everytime i got nothing.
    Then , I tried few things and I was able to show text in new lines.
    First of all never copy paste text in between <value> tags. Write text all by yourself.
    Then, I used a lots of "&nbsp" into "FinishingDescription" and also into "Resetting Password for {0}".
    And I was able to achieve this:
    I hope this will help you.
    Thanks~
    Giriraj Singh Bhamu

  • TS2446 Please help me re-enable my apple ID, every time I go to apple support they just tell me how to change the password.  The ID was disabled how can you put password. Is that ridiculous?

    Anybody please help me to reopen my apple ID, because it was disabled by iTunes Store. The apple support team was not helping. Just help you to reset the I'd password.  Since the ID was disabled I can not do anything, enenthough I reseted the password I can not reopen the ID.

    http://www.apple.com/support/itunes/contact/

  • Can't receive password reset token

    Hello. My grandma can't login anymore and I was trying to reset her password but I keep getting the "no voucher" error. I have logged in using my id because I was unable to reply on the support comunity without logging in and I can't login with her id.
    This is what I get when I try to reset her password:
    Unfortunately, we were unable to send your new token to the email address: [email protected] This may be because the email address was incorrectly entered on your account, or it is currently not working.
    Please ensure that you have a valid email address attached to your Skype account and that you add the @notifications.skype.com email address to your email account's safe senders list.
    If you are still not receiving emails from Skype, please contact your ISP (Internet Service Provider) to ensure that they are not blocking email traffic coming from Skype.
    Please give me a hand with this problem.
    Regards

    Dear All (after Community Manager's Claudius' post),
    Please do file with Skype Customer Service to enlist their assistance in determining why you are not receiving the password re-set token e-mail messages.  I subscribed to this thread so I can follow your progress.
    Here is the link to use to contact Skype Customer Service: https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service   As you know you need to contact Customer Service, skip past Step 2 and proceed directly to Step 3, Continue with Support Request.
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Can't access password reset for old apple ID that is not an email

    I have songs on my new computer that can only be authorized by my old apple ID. That apple ID is not an email, just an ID name. When I try to reset it by sending an email reset I have no idea where it is going. I have looked in all my old emails/junk mails/spam mails and nothing. To reset my password using the security questions I can't even get passed the birthdate. I created this ID when I was 10. How can I reset my password when I don't get an email verification because it wasn't even an email. I think it was created under the @mac.com domain, but when it shows up in the computer authorization window when I try to play music it's just the apple ID without a domain.

    Contact AppleID support.
    -> http://www.apple.com/support/appleid/contact/

Maybe you are looking for