Can you daisy chain 2, 3 or more Core Duo Minis VTech style?

I'm interested in the mini(s) if I can daisy chain them to spread the workload on various minis....much like System X in Virginia Tech. I'm trying to use my $2K budget the best way possible.
If not, can I at least run logic on one and use the other as a node? If so, do I need to consider how much memory EACH has, or just the main mini?
Thanks in advance.
SX

Well, if 2 nodes is all you need you'll probably be fine using just the Giga Ethernet. Just pick the tracks with more processing to do if your nodes aren't working hard enough. More info...well you can find it in the Logic forums....what else do you need to know? You'll want a Router or just use 1 on FW and 1 on Ethernet. You just need to to network them, create a private network (noone else needs access to them). Install the node app as a startup item. Leave it running for weeks at a time.
If that's all you need it for then start with 1 GB and make sure you can follow upgrading procedures. I am pretty sure it is only recommended that you install in pairs, if you buy 2 1 GB sticks put one in each and leave the factory sticks in the other slot you should be OK.

Similar Messages

Can You Daisy Chain Firewire 400 and 800 Mixed?

I would like to purchase an External Drive. I'm looking at a FW800. What I'm wondering is, Can I daisy chain devices mixed in.
I Want to run a FW800 Bilingual cable from my Powerbook to the External Enclosure. From the Ext. Enclosure, I'd like to have take my second FW800 port and take a cable that converts Firewire 800 to Firewire 400 and plug in another item. Is this possible?
Can I mix and match FW devices using separate protocol in a daisy chain configuration?

Russ,
Yes, it is possible. I have a drive that works on FW800, FW400, or USB2. Connected to the second FW800 port on that, I have an adaptor cable, a FW400 cable to a FW400 drive, and another FW400 drive connected to that . All 3 drives are on the desktop of my PowerBook. When I read your post, I had the only first drive connected to the iBook with USB2.
The only problem I've run into was trying to copy a 200G drive on FW800 to a 250G drive on the FW400 port on the PowerBook. Working overnight, it managed to copy ONE Gigabyte! I hooked them up as they are now, and copied the whole shebang in about 45 minutes
I picked up an empty drive case, 800/400/USB2 combo from OWC and a 250G Maxtor drive at CompUSA for about $100 less than I could get a 250 FW800 drive anyplace. http://www.macsales.com

How many FW devices can you daisy chain?

Have a new iMac w/ one FW800 port. Need to daisy chain eight FW800 hard drives, two FW400 hard drives, and one FW400 DigiDesign Digi002 ProTools mixing board. I was planning on daisy chaining all the FW800 drives then coming out of the last of those with a FW800 to FW400 cable into the first FW400 drive, daisy chaining to the 2nd FW400 drive, then daisy chain from it into the FW400 ProTools mixing board. I know that's a lot of chaining but at the moment those are the devices I have to work with. I have A LOT of video and audio information I need to retain. Seems to me that I read somewhere about a maximum length a firewire daisy chain could be but haven't found any more reference to it when I just looked. All of the devices have their own power supplies so I don't believe they will be drawing much, if any power from the chain. Anybody know of any problems with this setup?

Thanks for the info.
I've tried several scenarios and combinations what I've found is that I can put all the FW800 drives in a daisy chain then put the 1st FW400 drive in and lastly the Digi002 mixing board (which is FW400). When I try to add to this any more drives I get unpredictable results. I have therefore bough another 2TB external drive and hooked it up through USB 2.0 and copied many files to it from the older FW400 drives as well as the only FW800 drive that ever game me headaches. It should be noted that it is a Western Digital My Book drive. It seems like it would be a great drive having FW800, FW400, and USB 2.0 connections. In practice, however, I have had LOTS of problems both on my Macs and PCs I tried using it on. I recommend strongly that you avoid using any MY Book drives. I'm having better luck with practically any other manufacturer, including what I would normally consider no names like SimpleTech and Buffalo. Those drives seem much more stable.

Can you daisy chain two Compact DAQ systems together?

Greetings everyone,
I have a signal conditioning application and I have been looking at the Compact DAQ Platform as a solution.
I have a total of 16 TC's channels, a few DIO and a few Analog Out requirements.
I can basicly meet these needs with a single cDAQ system but I would like to have room to expand more in the future.
Does anyone know if it is possible daisy chain more than one cDAQ system together or if it woudl be very difficult to program and run two seperate DAQ systems from my computer.
Any help would be greatly appreciated.
Thanks,
Thomas

alkaline3mc wrote:
NI, the home of dead links....
You probably noticed that these posts were written 9 years ago...
LabVIEW Champion . Do more with less code and in less time .

Can you daisy chain time capsule??

A while back I tried to daisy chain 2 lacie drives off of airport and that didn't work. 2 questions:
1/from what I have read I can connect this to an airport extreme and that will work just like my lacie does now...
2/Does anyone know if I would be able to use all 3??
Thank you

I'll my 2cents worth here as there's some assumptions being made in these responses that IMO are misleading the author of this thread.
1. Apple fully supports using Time Machine with the internal HDD located in the Time Capsule.
2. It's a stretch to assume Time Machine can also safely (and with Apple's full support) also support USB AirDisk(s) attached to the Time Capsule. Recall that the earlier version of Time Capsule was the AEBS (10/100 or GbE) supported AirDisk(s) but their use with Time Machine was pulled from Leopard just a week before Leopard was released on Oct 26, 2007. At this time Apple has not made public what their future position is or will be in bringing back this feature.
So for those that are thinking of using USB drive(s) with Time Capsule and hoping to use them with Time Machine I say be forewarned or at least wait for Apple to publically announce support for them before investing in the Time Capsule.

Can you Daisy Chain the WRT54GS?

Hello,
I've recently purchased three LInksys WRT54GS. I've read the FAQ but not seen my exact problem listed.
Can the WRT54GS (the super G version) be Daisy Chained (1 router, 2 as APs with dhcp disabled) and if so which port should link to from router #1, port1 or the "internet" port.
If I use the port marked "internet" than I get great signal strength but a lot of drops. However if I use port1 on each of the routers I'm using as AP's then I get low signal strength but less drops.
Configuration so far:
router-1 (dhcp enabled)
ssid - router1
channel 1
192.168.1.1 /255.255.255.0
router - 2 (dhcp disabled)
ssid - router2
channel 6
192.168.1.2 /255.255.255.0
router -3 (dhcp disabled)
ssid - router3
channel 11
192.168.1.3 /255.255.255.0
thank you for the help!

These answers are incomplete oin their face:
You described the config as:
router -3 (dhcp disabled)
ssid - router3
channel 11
192.168.1.3 /255.255.255.0
which tells nothing about the "WAN and LAN addresses cannot be the same"
The "Local IP" address cannot be the same as the Internet (WAN) address
"Internet Setup" or "Netword Setup"?
It is as if you have never looked at the config screens in this router.
How is your local PC connected to the second router supposed to get the DHCP address when there is no route to the first router? Then, how can you connect to the second router to configure the route? I set a static IP for my PC and I can connect to the second router, but even after setting a route, which cannot have a 0.0.0.0 gateway, cannot ping the first router.
Let's tell the whole story here, the complete configuration. It's a simple expectation to have a second router hard-wired to the first router, and the secod router providing "distant" wireless access to the network.
The whole story folks?

Can You Daisy Chain Verizon Actiontec MI424WR Routers???

I currently have an Actiontec MI424WR router which is a wireless G router. Since I have some Tivo HD units in the house (they use wireless G) that I'm looking to upgrade to Tivo Premiere (they use wireless N), I'd like to upgrade my wireless network to wireless N (I would be able to transfer HD shows between Tivo units ALOT faster over a wireless N network as the G network I have now is very slow). I also will be buying my son an Xbox and the faster network would help with all the online gaming.
Since Verizon doesn't yet offer a wireless N router, I'm trying to come up with a solution and I think I might have one.
I'm sort of a newbie with networking but here is what I'm looking to do:
I'd want to buy a second router that has wireless N capabilities (I'm looking at the Netgear WNDR3700 Rangemax Dual Band Wireless N). Then I will go into the Verizon Actiontec router and turn off the wireless function. Next I will connect the new router to my PC and turn on the wireless function, disable the DHCP and assing the new router a different IP address. Then I will connect the two routers using an ethernet cable from the Actiontec LAN port the the Netgear's LAN port. Essentially, what I want to do is have the Actiontec router still bring in all the information in from the ONT but have the Netgear router send it out via it's wireless N signal.
I think in theory this should work but I wanted to pass it by the forum to see what details I'm missing here. Any assistance would be greatly appreciated, including any details as I quickly glossed over my idea in the paragraph above.

Your options are to either buy a Wireless N router, DISABLE DHCP on it, and then plug them together (the internal / ethernet side, do NOT use the WAN port on the new router in this scenario.) That would make you effectively use it as a wireless access point instead of a router. You do not want to get into daisy chaining routers, it'd doable, but not a complication you need in your scenario.
Honestly if I were you I'd just get a wireless N access point. http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4468240&CatId=372

I have a Mac Pro tower with two internal Hard Discs, each one 2TB. I purchased a 3TB Time Capsule. But it does not allow me to back up because it says there is not enough back up space available. Between the two HDs there are 3.3TBs. Can I daisy chain TC?

I have a Mac Pro tower (OSX version 10.6.3) with two internal Hard Drives, each one 2TB.
I purchased a 3TB Time Capsule. But cannot back up because it tells me there is not enough space.
I have more than 3Tbs to store to the new TC.
Can I daisy chain two TCs to store the 4TBs?
How can I back up only the internal HD that is already full, without backing up the other one?
How can I do back up using Time Machine to back up the 3.5Tbs?
Do I need to purchase another external HD (that is not TC) to be able to back up all of my photos?

Can I daisy chain two TCs to store the 4TBs?
No, you cannot link to produce a single large partition.
But you can have two separate backup jobs.. and use each partition. That is hard on TM but you can easily get a different backup software for it.
How can I back up only the internal HD that is already full, without backing up the other one?
In TM you do a different setup and exclude the other drive.
But it is better to use an alternative software IMHO.
How can I do back up using Time Machine to back up the 3.5Tbs?
You would need to use a network drive of more than 4TB .. it would also take forever. This is just wrong way to do it. Although you can buy a NAS that will work with Time Machine and load it with disks 16TB is possible.. if you can get a second mortgage.. the fragile nature of TM on 3rd party devices.. would leave me in cold sweat if anything went wrong.
TM is excellent at keeping incremental backups of files that keep changing.. as such you should use TM to backup your OS disk and main user directory.. exclude all files and directories that never change. Back them up separately.
Do I need to purchase another external HD (that is not TC) to be able to back up all of my photos?
Yes, that is a much better idea. You want to store photos safely and you want to store them in multiple places. If you have multiple TB of photos, dedicate a couple of disks to the backup. ie have at least two copies.. not in backup format.. in straight copy format if possible.. so you can keep one of the disks offsite.
I would be using your MacPro internal disk access, to place the disk onto sata bus and do the copy disk to disk direct. Or even buy esata card.. or sata to esata converter cable so you can use esata box. That will beat any other transfer speed except thunderbolt for which you would need third mortgage. (The MORT in mortgage is significant).
The great jurist Sir Edward Coke, who lived from 1552 to 1634, has explained why the term mortgage comes from the Old French words mort, "dead," and gage, "pledge." It seemed to him that it had to do with the doubtfulness of whether or not the mortgagor will pay the debt.

Can't daisy-chain Firewire drives reliably from 1-port Powerbook. Hub??

I have found that I cannot get a daisy-chained Firewire drive to mount more than 50% of the time. This problem doesn't happen with Tiger with the same drives. I have tried 4 different brands of late-model Firewire drives (Iomega, Smartdisk, Maxtor, and Seagate) with different cables and what happens is that a drive that is directly attached to the 12" Powerbook will mount, but the second chained drive fails to mount a majority of the time. Since I only have one Firewire port, this is preventing me from using more than one drive at a time, and I lost two Firewire drives to corruption today. Three out of four partitions lost contained bootable backups of Leopard and Tiger. Ouch!
This issue could prevent from using Leopard with my Powerbook, which is supposed to be Leopard-compatible. I can't remake the clones too easily with only being able to attach one drive at a time. I am thinking I will order a Firewire hub and try that, but I am not sure if that would be a solution, and I am wondering why I can always daisy-chain under Tiger, and not under Leopard. Does anyone have experience with Firewire hubs and Firewire operation details? Will I be able to get reliable Firewire with a hub?

I have exactly the same problem !
I have found this :
Using Multiple FireWire Devices at the Same Time
Power Macintosh computers can transfer perfect digital video (DV) on FireWire when no other devices are using the FireWire bus. If you have problems transferring digital video, make certain that no other FireWire devices are being used at the same time. Turning on a DV camera that is already connected may cause a FireWire hard disk to stop working. If this happens, turn off the camera and verify that the hard disk has recovered. Then unplug the FireWire cable from the camera, turn the camera on, and reconnect the FireWire cable to the camera. Check with the hard disk vendor for a possible firmware update to prevent this problem.
here:
http://www.2ndwave.com/firewire.asp
At the moment I can't upset what I'm doing to test it but I intend to do that as soon as I finish copying transferring...
I have the following device attached to different firewire ports:
a firewire video device connecting my G5 Desktop to the TV screen
a firewire ibot
I thought I would give u a head start

How many firewire drives can I daisy chain on the mac mini

How many firewire g-drives can I daisy chain on my mac mini

edalexjr wrote:
How many firewire g-drives can I daisy chain on my mac mini
From personal experience, if they are bus powered portable drives,
the answer is none. For what ever reason, they are draw a lot of
power and are probably near the edge of the bus powering specs.
Then again, these were the fastest of all the portable FW drives that
I have (Iomega and Seagate being the others), which may have
something to do with it.
I had also noticed an issue with them even with USB. Plugging one
into the Mini or even a powered USB hub would be fine, but 2 would cause
both to be inaccessible, unless I used a couple of USB "Y" cables
that would distribute the power across other ports.
If they are externally powered, you could string a bunch.

HT5299 Can 2 daisy-chained firewire-800 drives be connected to 1 Thunderbolt-to-Firewire adapter?

Can 2 daisy-chained firewire-800 drives be connected to 1 Thunderbolt-to-Firewire adapter?

Nightwatch (NL) wrote:
Thanks Steve!
One more question: Stayed throughput speeds more or less the same as original Firewire (since all my movies are on external disks) or has it become significantly slower?
I haven't done a careful side by side quantitative comparison of what I had on the older Macbook Pro (which had three Firewire800 disks chained together via FW800) versus the new Macbook Pro (which has thunderbolt into which I have connected three FW800 drives daisy chained via the adaptor), mainly because my employer supplied me with these computers and required I turn in the old one when they replenished it with the new one. However, I can say this -- one of the FW800 externals is used for Time Machine, another for making entire disk clones, and the third is for misc storage. I have seen Time Machine start up during a disk clone (with SuperDuper) and there seems to be no impact. The disk cloning is generally pretty intensive on disk and cpu resources, but thunderbolt seems to have a much bigger capacity for throughput than firewire and hence can apparently accommodate multiple streams of FW800 data going back and forth with no apparent impact on each other. The main limit seems to be the FW800 speed itself, not thunderbolt. I see ~ 60 MB/s or more which is as much as I have ever seen on FW800. Ultimately, the ideal setup will be thunderbolt drives daisy chained together, I would expect hundreds of MB/s, but I don't see many of these thunderbolt drives on the market yet. Even better would be solid state drives ...

Can I daisy chain non-Apple devices?

Can I daisy chain non-Apple devices or do they have to have Input Output thunderbolt ports?

yes you can this should do it http://www.iogear.com/product/GUC2015V/

Can I daisy chain airport extremes, Can I daisy chain airport extremes

Can I daisy chain 2 airport extremes?

If you mean plug one into the other by ethernet and use both in roaming network.. absolutely.. it is the best way.
If you want some specific functionality tell us what it is you are after.

Can i daisy chain external drives

I have 3 drives but only 2 800 wire ports. Can I daisy chain, or use a 400 wire?

daisy chaining should work fine. I used to have about 11 drives chained (which was pushing the envelope - but it worked with dv material). If at all possible, avoid firewire 400 as it will reduce your thruput.

Can I daisy chain IDE and SATA drives w/ FW400?

I have an 250GB IDE drive in ann ext enclosure with two Firewire 400 ports. Can I daisy chain a SATA drive to this or does it have to be another IDE drive?

If both are in their own Firewire case then yes. The FW interface converts whatever internal interface it is so the computer only sees it as a FW device.
George

Can you daisy chain 2, 3 or more Core Duo Minis VTech style?

Similar Messages

Maybe you are looking for