Can You DISPLAY the Remodeling Rule in BW QA System ??

Hi all,
    Can you Display the Remodeling Rule (BI 7.0 feature) in QA system, PLEASE ???
    The TCode for 'Remodeling' is RSMRT.
    Select any 'Remodeling Rule' from the look-up and try to DISPLAY it.
     You could find all the Remodeling Rules in RSCNVCGHEADER Table also.
    Thanks in advance.
Regards,
Venkat.

Hi Subash Balakrishnan,
I am getting the following when I try to DISPLAY the Remodeling Rule in QA system which is transported from Dev system:
'Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
Message no. R7063.
Basis team says to open the CLIENT in QA system.
Did you try to display it QA system without any problem, PLEASE ???
Thanks,
Venkat.

Similar Messages

Did YOU Transport the 'Remodeling Rule' into QA system and Scheduled it ???

Hi all,
I have created a 'Remodeling Rule' of BI 7.0 feature to add a characteristic to the InfoCube
and successfully transported this 'Remodeling Rule' into QA system.
Do we have to keep the CLIENT open before we start the 'Schedule' of 'Remodeling Rule' in QA or Prod systems?
Could you PLEASE answer it if YOU have really worked on the 'Remodeling Rule'. PLEASE....
Thanks in advance.
Regards,
Venkat.

Hi Venkat,
You can keep the Client Open in QA when you are applying an Remodelling Rule.
Once you created Remodelling Rule. you can start Immdetely to schelude.
However In Prod, you need to Close the Client before you apply the Remodelling Rule (You have to option to schedule it later if youare directly applying it in Prod box) or Trasport to Prod from QA.
Because the charateristic which youadded to the cube should not afftects the REports created on that perticular Cube.
Rewards points if helpfull
Regards
Hari

Can you display the battery strength in numbers on home screen like you would for the signal?

I know you can view it at the option/status arena, but can you change the battery strength display at the home screen to numbers like you would on the signal?

BatteryPercent = DeviceInfo.getBatteryLevel();
LabelField Label1 = new LabelField();
Label1.setText(""+BatteryPercent+"%");
you can use the above code to display battery percent
feel free to press the kudos button on the left side to thank the user that helped you.
please mark posts as solved if you found a solution.

How can you display the parameters on the actual report?

I need to display the dates that are entered in as parameters for the report. These parameters change each time the report is run. Is there anyway for these parameters to be displayed and printed on the top of the report?
Thanks in advance for the help!
Doug

Cristian - Thank you very much for the response. However, I do not have the "Edit Titles" option under the Sheet menu item. Could there be a difference in versions? My Discoverer version is as follows:
Oracle Discoverer(tm) 4i Plus Release - 4.1.36.22.0
Discoverer Model - 4.1.36.22.0
Discoverer Server V4.1.37.01.0
End User Layer V4.1.11.0.0.0
End User Layer dce.dll V4.1.37.00.0
Oracle9i Enterprise Edition Release 9.0.1.3.0 - Production
There are "Edit Sheet" and "Edit Parameter Values" options but these do not have an option similar to what you mention below. Do you know of another method for doing this? Does anyone use the same version of Discoverer?
Thanks for the help,
Doug
Yes you can.
You Just have to modify the Title (Sheet-> Edit Titles)of the report. In The dialog box that appears there is Button that let's you insert diferent values, one of them it's the parameters of your report. This will insert all the parameters with the parameter name and it's value.
Hope this helps

How can you modify the displayed columns on a Related Information List?

How can you modify the displayed columns on a Related Information List? For example, how could you add the "Type" column to the List of columns displayed for Service Requests when you are viewing the Contacts Detail page?
Thanks

I'd have to say I think this is one of the biggest flaws in the OnDemand system currently. The solution I have come up with is to create reports and put them in webapplets showing the data I want to show. I have then removed the standard Related Info List Objects and added weblinks to create new records as the button on the List object is also gone.
Keep in mind that doing this does slow things down a little, so it may not work if you have a big user base.
RWB.

Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it first?

Can you use the 13-inch MacBook Pro with Retina display straight out of the box, or do you have to charge it up fully before you can use it. I do not want to damage the laptop by misusing the battery.

Attach the charger and start charging the battery to 100%. The good news is that after you have connected the charger, you may start using the MBP as well.
Ciao.

M faceing one error on my screen when m using adobe premiere & save file then the one massage come on my display "adobe premier pro cs6 has been sttoped working" can you resolve the problem

m faceing one error on my screen when m using adobe premiere & save file then the one massage come on my display "adobe premier pro cs6 has been sttoped working" can you resolve the problem

Nobody can tell you anything without system information and other details. Ask in teh Premiere forum and provide al lthe required info.
Mylenium

Can you deploy Oracle Business Rules to the other App servers

Can you deploy Oracle Business Rules to the other App servers such as Websphere and Jboss

Yes. Please see the Appendix C in the documentation at:
http://download-west.oracle.com/docs/cd/B31017_01/web.1013/b28965.pdf
For WebSphere, updated instructions will be released soon that allow all RuleAuthor features to be used.

Can you change the ruler color of grey to be an actual color?

So in Illustrator, Photoshop and InDesign, can you change the rulers to be something other then the boring grey. I mean can you change it to actual be a color? If yes, how? If no, Adobe really needs to implement this. I think to have the rulers be in a color would help greatly for visibility.
Thanks for any help. Thought perhaps there may be an easter egg or trick possibly to do this.
Jeff

In my pages the shapes are green with a black line. Yo can change it by clicking on the format bar. See image. You can also change it in the Inspector palette > Graphic tab > Fill
You could create a document with all the shapes int the right colour and save as a document or template. Then you can use it by "copy and paste" the shapes into a new document

Is Anyone Has Transported the Remodeling Rule into QA and Scheduled ?

Hi all,
I have created a Remodeling Rule to add a characteristic to the InfoCube
and successfully transported this Remodeling Rule into QA.
I could see this Remodeling Rule in the 'Remodeling Rule' look-up and when
I try to DISPLAY this Rule it gives the error of
'Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
Message no. R7063.
We are in BI 7.0 with SP17.
Did you open the client with support of Basis to display and Schedule it?
Thanks in advance.
Regards,
Venkat.

This problem will be fixed if we open the client.
Thanks,
Venkat.

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

How can I display the data in table in separate column?

I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.

If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi ‏18 KB

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can i display the message

public class Userdefined extends Exception {
 Userdefined(String sparam){
 System.out.println(sparam);
 Userdefined(){
 private static int acno[]={100,105};
 private static double bal[]={100.00,200.00};
 public static void main(String args[]) {
 try{
 for(int i=0;i<2;i++)
 System.out.println("ACCCCNO------>"+acno[i]+"BAl------>"+bal);
 if(bal[i]<150.00)
 Userdefined udexp=new Userdefined("bal less");
 throw udexp;
 catch(Userdefined e){
 System.out.println("--->"+e);
How can i display the message "less amt" using my parmeterized constructor.

VinayTK wrote:
How can i display the message "less amt" using my parmeterized constructor.Erm ... what? You can't --- at least not with the stuff you've got there.
A properly formed question, with some idea of what you're trying to accomplish would be a huuuuge help.
Winston
BTW: Congratulations. At my age, 'first's in computing are rare; but it's definitely the first time I've seen an Exception class with a main() method.
Edited by: YoungWinston on Sep 1, 2009 9:46 AM

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

Can You DISPLAY the Remodeling Rule in BW QA System ??

Similar Messages

Maybe you are looking for