Can you edit an archived project?!?

I have a wedding project archived through iDVD08. I want to replace one song in the Reception of the movie. I do not have my original iMovie files anymore due to file size and hard drive limitations.
Does anyone know if I can re-edit my archived project?
Thanks to all!
Greg

OK... the Archive is a package. Control-click on it and select 'Show Package Contents'. Then the path is Contents>Resources>Assets>av Your movie clips will be in the av directory. COPY the movies you want and paste them in a new location. DO NOT simply drag them out of the package!!!!!!!

Similar Messages

Can you edit a person from one photo and add them to another photo?

Can you edit a person out of one photo and add them to another photo? Like if you need the head shot from one photo to replace closed eyes in the other photo? Thanks.

Thank you very much! Does this require software to be purchased? I'm new to Photoshop.
From: Bill Hunt <[email protected]>
To: Kittie Gugenheim <[email protected]>
Sent: Monday, April 25, 2011 11:46 AM
Subject: Re: Can you edit a person from one photo and add them to another photo?
Welcome to the forum.
Yes, this is done often. You will need to create a Mask of that person, to separate them from the background of the original Image.
I like to do this with a Layer Mask, as it offers control, and really does not alter the Image, so you can go back and make changes.
Let's say that you have Image 01 w/ the head of your subject, and want to place it into Image 02. In Image 01, make a rough Selection. I would include a bit of extra background, as we will take care of that in a moment. With that Selection active, Copy the head shot. Go to Image 02, and Paste it. It will Paste in its own Layer. Ctrl+T (Free Transform) can be used to Scale and also position that Layer with the head. Once you have that Scaled and positioned about where you want it, create a Layer Mask. In QuickMask Mode, just paint in the additional Mask to remove all traces of the background that came in with the head shot. As you can paint OUT, and also paint IN the Mask, you can work on this, as many times as you wish - even next year.
For getting that Layer Mask looking good, work slowly, also see this http://graphicssoft.about.com/od/photoshop/l/blrbps_5agirl.htm.
I've got another tutorial, that addresses the hair area, and will post that, when I find my bookmark.
Good luck,
Hunt

Can you edit a host's provided templates in iWeb?

I am looking at Hostgator to host my simple business site. They have a ton of business site templates, but apparently you need some software (like FrontPage or DreamWeaver)to edit them. Can you edit these templates using iWeb? Are there other hosts with templates that are compatible with iWeb?

Follow this link for iWeb templates:
http://www.ipresentee.com/
If you're lucky they still have [a free template for Christmas|http://www.ipresentee.com/iPresentee/iPresentee-_ChristmasGift.html].
They (Hostgator) have a ton of business site templates
Download the templates you like and use the layout to re-create the page in iWeb. Drop the images on your iWeb canvas and rearrange them.

Can you Share Scenes between projects?

Can you Share Scenes between projects?
I would like to take already created scenes and share them
between files and projects so multiple people can use them as a
resource. Can it be done?

pndrgn wrote:
> Can you Share Scenes between projects?
> I would like to take already created scenes and share
them between files and projects so multiple people can use them as
a resource. Can it be done?
Scenes are just for authoring convenience, they basically
blank frames giving an end to one
and beginning to another timeline so you can't actually
define scene like you could a movie clip.
What you can do however is to Copy frames by unlocking all
the layers, highlighting all the frames
and CTRL ALT C than open new file and paste the frames CTRL
ALT V
That's the only way to share the scene.
Regards
Urami
Happy New Year guys - all the best there is in the 2006 :)
<urami>
http://www.Flashfugitive.com
</urami>
<web junk free>
http://www.firefox.com
</web junk free>

Can you edit muse cc in dreamweaver

Hi
Can you edit Muse CC in Dreamweaver ?

This question is really best on the Dreamweaver or Muse forums but here is the answer I found:
"Muse is not intended to be a code generation hand-off tool for downstream editing. We recommend you do all of your site editing in Muse, rather than exporting the site from Muse and editing the code elsewhere. By staying within Muse, you can continue to use the full functionality of Muse to update your site. As soon as you move to altering the output of Muse, there's no going back (unless you're willing to re-make your changes each time you export from Muse). The HTML code output from Muse is not optimized for manual editing."
Form this forum post: Re: Muse to Dreamweaver?
So while it may be possible it is not recommended.
Hope that helps.

Can you edit a pdf document without exporting it into a word document?

Can you edit a pdf document without exporting it into a word document?

Hi sylvias99766822,
You can if you have Acrobat. If you don't, feel free to give it a try. You can download a 30-day trial from http://www.adobe.com/products/acrobat.html.
Keep in mind, though, that Acrobat isn't intended to be a word processor. So, while you can make adjustments to text and graphics, if you need to do a major overhaul of the text in the document, it's best to go back to the source document and edit the content there.
Best,
Sara

Nikon D90 footage: Can you edit natively in Final Cut?

Just wondering if anyone has been using the new Nikon D90 to shoot video, and then importing the footage natively into FCP6. The camera's video-recording format, from what I have read, is 720p24, an .avi file, and a Motion JPEG codec.
I see that in the settings for a Final Cut sequence, you can choose 1280X720 frame size, a true 24 frames per second rate, and either a Motion JPEG A or Motion JPEG B compressor. It seems like with these settings, you could put your footage into the timeline and not have to render it before editing . . . unless the .avi file format goofs it up. Can you edit .avi in Final Cut natively, or do you have to use a Quicktime file?
Any workflow advice much appreciated,
Jim

No, sorry to say, I do not own the camera. And in looking around the web for an original, as-shot-by-the-D90 clip to experiment with, the only ones I found were at this site:
http://www.dpreview.com/news/0809/08090101nikond90samplegallery.asp
They were billed as: D90 sample movie 1 • original .AVI format • 21 seconds, 35.7 MB
and: D90 sample movie 3 • original .AVI format • 9 seconds, 24.5 MB
So I downloaded them, imported them into Final Cut, and they showed up with settings in the browser of: 1280X720 and 24 fps (so far so good) but then a compressor setting of "Apple OpenDML JPEG" rather than what I was expecting, Motion JPEG, which is what the D90 spec is. If the clip was truly "original .AVI format," I would have expected the compressor setting to be Motion JPEG.
Then, when I tried to change the sequence settings to Apple OpenDML JPEG, I found that there is no such setting. My thought was if the size, 1280X720, the frame rate, 24, and the compressor settings all matched, you could edit natively. And when I dragged the clip into the timeline, it did not give me a dialogue box asking if I would like the sequence settings to match the clip, the way it does with some footage.
Yes, you can render the clip and then edit it, but it would be great to avoid that step. Anyway, I got the red bar in the timeline with every combination of sequence compressor settings I tried, maybe 10 of them.
So maybe the answer is some time is needed for Final Cut to support the D90's Motion JPEG files natively, though I believe that is an older codec. Too bad the D90 does not record in something like DVCPRO HD. For a $1000 camera, the image quality looks pretty good, and the shallow depth of field really turned my head. I was thinking it might be a cheap Red Rock or Letus killer.
Thanks for the input,
Jim

Can you edit or remove from reading list in Safari?

Can you edit or remove from reading list in Safari?

Yes, swipe from right to left across the title of the reading list item and then touch the red Delete which appears.

Can you edit Muse website without Muse?

I'm creating a website for a community group. I'd like them to be able to update their annoucements and events without my help if they need to. For events, we can use a Google calendar but if they want to update the front page with an announcement or something, I'd like them to able to do so. Some of the people are ok with code but do not have access to Muse software.
Can you edit Muse website without have Muse?
Should I create the website in a different way like Weebly, etc?
Thanks

Yes, I've got the Creative Cloud thing so I was going to host it there. It's a community garden that's just getting started and I'll be traveling for a few weeks this summer and I'm afraid that they may need to update things while I'm gone. Plus I don't want to be the sole person who can keep it going.

Can you edit raw photos in photo shop 11?

Can you edit raw photos in photo shop 11?

Hi,
Are you talking about photoshop elements 11 or photoshop cs4?
You can edit camera raw files with both of the above, but it might depend on the camera the raw files came from.
What operating system are you using?
Which camera are the raw files from?

Can you edit destinations in Maps

can you edit destinations in Maps

Can you be a little more specific concerning what you want to edit?

Can you edit xml files in adobe contribute

can you edit xml files in adobe contribute

No, you can't even open them in recent versions of PSE.

Can you edit text after saving your file as pdf

I have recently created a letterhead in Illustrator.
Is there a way to change a person name and title after saving it as a pdf file? I heard something about creating a form in Acrobat professsional.
I need to print out a letterhead with different peoples name and title. Any help would be appreciated. Thank you.

Can you edit the text in Acrobat Reader?
Yes, if you use Acrobat Pro to save the PDF as a Reader-enabled form.
1. Create your letterhead in Illustrator (or whatever). Leave design space for, but do not create text objects that you want to be editable.
2. Save as PDF.
3. Open the PDF in Acrobat Pro. Use Acrobat's Form tools to add text fields whereever you want the end users to be able to key text.
4. Select the Enable Reader Usage Rights command in Acrobat to make the form fields edtiable in Reader. Save the file.
Recipients of the PDF can now open it in Reader, edit the content of the fields, and save the file with their edits.
JET

Can you EDIT a name in your reading list on safari?

Can you edit the name of an item on your reading list? I know how to delete but not edit. I save a lot of things on the reading list from one site and it names them all the same thing. I am looking for a way to change the names so I can differentiate between them easier. Thanks.

No, the reading list entries cannot be edited. The Title and descriptive text are picked up from the attributes of the pages you book mark. You will need to use bookmarks rather than the reading list if you wish to edit it.

Can you edit the color of the bottom play bar on a slide once you assign the cpCmndShowPlaybar to 0

Can you edit the color of the bottom play bar on a slide once you assign the cpCmndShowPlaybar to 0. When I assign the slide this action it shows a grey shape at the bottom hiding the playbar controls, but I would like to make that color white to blend in with the white background on my webpage. How do you change the color?

It is not possible to change the border color by an (advanced) action, sorry. If you do not mind, you could choose the white color for the bottom border from the start. When the playbar is showing, provided it it stretched, it will cover up this bottom border.
Lilybiri

Can you edit an archived project?!?

Similar Messages

Maybe you are looking for