Can you edit CRM records with {Tag_edit}

Hi,
I 'm wondering if I can edit my records with {tag_edit)
I can edit the web apps , but when I include the {module_firstname} and edit it. It wont edit the record in CRM.
So I wonder if there is way to do it?
I don't think it will be through web app.
What I'm aiming for is that web user can edit their own information throught a secure zone.
For example. I have created website , with back end. Custom back end. Once the user is registered. He can alter the details.
With out loggin in to admin panel and edit the record in CRM.
Any suggestions would be appreciated.
Thanks
Kind Regards
Jiri

Hi Matt,
Thank you, that what I needed.
Next question.
Could you point me in a right direction. How would I be able to make progress bar? with 5 stages and when I hover over it would tell me some informations.
I have thought of web app. But i'm not too sure now.
Any help will be appreciated.
Thanks
Kind Regards

Similar Messages

Nikon D90 footage: Can you edit natively in Final Cut?

Just wondering if anyone has been using the new Nikon D90 to shoot video, and then importing the footage natively into FCP6. The camera's video-recording format, from what I have read, is 720p24, an .avi file, and a Motion JPEG codec.
I see that in the settings for a Final Cut sequence, you can choose 1280X720 frame size, a true 24 frames per second rate, and either a Motion JPEG A or Motion JPEG B compressor. It seems like with these settings, you could put your footage into the timeline and not have to render it before editing . . . unless the .avi file format goofs it up. Can you edit .avi in Final Cut natively, or do you have to use a Quicktime file?
Any workflow advice much appreciated,
Jim

No, sorry to say, I do not own the camera. And in looking around the web for an original, as-shot-by-the-D90 clip to experiment with, the only ones I found were at this site:
http://www.dpreview.com/news/0809/08090101nikond90samplegallery.asp
They were billed as: D90 sample movie 1 • original .AVI format • 21 seconds, 35.7 MB
and: D90 sample movie 3 • original .AVI format • 9 seconds, 24.5 MB
So I downloaded them, imported them into Final Cut, and they showed up with settings in the browser of: 1280X720 and 24 fps (so far so good) but then a compressor setting of "Apple OpenDML JPEG" rather than what I was expecting, Motion JPEG, which is what the D90 spec is. If the clip was truly "original .AVI format," I would have expected the compressor setting to be Motion JPEG.
Then, when I tried to change the sequence settings to Apple OpenDML JPEG, I found that there is no such setting. My thought was if the size, 1280X720, the frame rate, 24, and the compressor settings all matched, you could edit natively. And when I dragged the clip into the timeline, it did not give me a dialogue box asking if I would like the sequence settings to match the clip, the way it does with some footage.
Yes, you can render the clip and then edit it, but it would be great to avoid that step. Anyway, I got the red bar in the timeline with every combination of sequence compressor settings I tried, maybe 10 of them.
So maybe the answer is some time is needed for Final Cut to support the D90's Motion JPEG files natively, though I believe that is an older codec. Too bad the D90 does not record in something like DVCPRO HD. For a $1000 camera, the image quality looks pretty good, and the shallow depth of field really turned my head. I was thinking it might be a cheap Red Rock or Letus killer.
Thanks for the input,
Jim

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can you edit a person from one photo and add them to another photo?

Can you edit a person out of one photo and add them to another photo? Like if you need the head shot from one photo to replace closed eyes in the other photo? Thanks.

Thank you very much! Does this require software to be purchased? I'm new to Photoshop.
From: Bill Hunt <[email protected]>
To: Kittie Gugenheim <[email protected]>
Sent: Monday, April 25, 2011 11:46 AM
Subject: Re: Can you edit a person from one photo and add them to another photo?
Welcome to the forum.
Yes, this is done often. You will need to create a Mask of that person, to separate them from the background of the original Image.
I like to do this with a Layer Mask, as it offers control, and really does not alter the Image, so you can go back and make changes.
Let's say that you have Image 01 w/ the head of your subject, and want to place it into Image 02. In Image 01, make a rough Selection. I would include a bit of extra background, as we will take care of that in a moment. With that Selection active, Copy the head shot. Go to Image 02, and Paste it. It will Paste in its own Layer. Ctrl+T (Free Transform) can be used to Scale and also position that Layer with the head. Once you have that Scaled and positioned about where you want it, create a Layer Mask. In QuickMask Mode, just paint in the additional Mask to remove all traces of the background that came in with the head shot. As you can paint OUT, and also paint IN the Mask, you can work on this, as many times as you wish - even next year.
For getting that Layer Mask looking good, work slowly, also see this http://graphicssoft.about.com/od/photoshop/l/blrbps_5agirl.htm.
I've got another tutorial, that addresses the hair area, and will post that, when I find my bookmark.
Good luck,
Hunt

Can you edit a host's provided templates in iWeb?

I am looking at Hostgator to host my simple business site. They have a ton of business site templates, but apparently you need some software (like FrontPage or DreamWeaver)to edit them. Can you edit these templates using iWeb? Are there other hosts with templates that are compatible with iWeb?

Follow this link for iWeb templates:
http://www.ipresentee.com/
If you're lucky they still have [a free template for Christmas|http://www.ipresentee.com/iPresentee/iPresentee-_ChristmasGift.html].
They (Hostgator) have a ton of business site templates
Download the templates you like and use the layout to re-create the page in iWeb. Drop the images on your iWeb canvas and rearrange them.

HT201318 I tried to downgrade my iCloud and when i did it never refunded me can you please help me with this thank you James

I tried to downgrade my iCloud and when i did it never refunded me can you please help me with this thank you James
<Personal Information Edited by Host>

How did you try to downgrade
(Don't post your telephone number in public places, unless you need more useless phone calls) I will ask for it to be removed.

Can you activate an iphone with one sim, and than once it is activated use it with another sim?

can you activate an iphone with one sim, and than once it is activated use it with another sim?

It could be the activation server is unavailable right now, however have you or anyone else ever used that computer to jailbreak or hack another phone? That can have an affect on the hosts file. You can check this regarding information on the hosts file or security software problems.
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.

Can you edit Muse website without Muse?

I'm creating a website for a community group. I'd like them to be able to update their annoucements and events without my help if they need to. For events, we can use a Google calendar but if they want to update the front page with an announcement or something, I'd like them to able to do so. Some of the people are ok with code but do not have access to Muse software.
Can you edit Muse website without have Muse?
Should I create the website in a different way like Weebly, etc?
Thanks

Yes, I've got the Creative Cloud thing so I was going to host it there. It's a community garden that's just getting started and I'll be traveling for a few weeks this summer and I'm afraid that they may need to update things while I'm gone. Plus I don't want to be the sole person who can keep it going.

Can you edit raw photos in photo shop 11?

Can you edit raw photos in photo shop 11?

Hi,
Are you talking about photoshop elements 11 or photoshop cs4?
You can edit camera raw files with both of the above, but it might depend on the camera the raw files came from.
What operating system are you using?
Which camera are the raw files from?

I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product? We are in full wedding season and am a little frustrated. Photo mechanics opens them right up to download them. I am using the Nikon software to convert them

I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product? We are in full wedding season and am a little frustrated. Photo mechanics opens them right up to download them. I am using the Nikon software to convert them into tiffs. when is the camera raw update coming out. I am not the only photographer with this issue check out all the chatter about it.

This happens every single time a new camera comes out from one of the two big camera makers. Nikon and Canon do not send preproduction units to Adobe, so Adobe has to go out and buy a D750 or whatever from the store to test and profile it before they can update Lightroom. They can't get one earlier than you and I can. The profiling is quite an extensive operation. Other camera makers do send preproduction units, use dng, or do the profiling in-house and there you often get support right from release. If camera makers would finally embrace an open raw format such as dng, this whole problem would be gone but both Canon and Nikon seem to think they live in an upside-down world where their clients only use their software.
Usually the dead period only lasts a few weeks but it is frustrating nevertheless. My only advice is to not buy a new camera at the day of release and expect to have third parties to support it. You definitely should not be buying these cameras right away if your business depends on it. Aperture, Capture One, etc. have the exact same problem. No third party (read non-Nikon in this case) will support the camera from the release date. Some are quicker than other adding support. Adobe is somewhere in the middle of the pack in this respect. Nobody outside of Adobe knows when an update comes out. Could be tomorrow, could be a few more weeks or a month. They might jump straight to Lightroom 6 and never add direct support to LR 5. Sometimes they will first bring out a beta version of dng converter that will convert the new camera's nef files to dng, which will work fine in the current Lightroom before updating Lightroom itself.

Can you edit text after saving your file as pdf

I have recently created a letterhead in Illustrator.
Is there a way to change a person name and title after saving it as a pdf file? I heard something about creating a form in Acrobat professsional.
I need to print out a letterhead with different peoples name and title. Any help would be appreciated. Thank you.

Can you edit the text in Acrobat Reader?
Yes, if you use Acrobat Pro to save the PDF as a Reader-enabled form.
1. Create your letterhead in Illustrator (or whatever). Leave design space for, but do not create text objects that you want to be editable.
2. Save as PDF.
3. Open the PDF in Acrobat Pro. Use Acrobat's Form tools to add text fields whereever you want the end users to be able to key text.
4. Select the Enable Reader Usage Rights command in Acrobat to make the form fields edtiable in Reader. Save the file.
Recipients of the PDF can now open it in Reader, edit the content of the fields, and save the file with their edits.
JET

Can you please help me with validation logic for Events in Table maintenance generator

Can you please help me with validation logic for Events in Table maintenance generator,i.e if i enter record in 1st internal table then automatically 2nd internal table should be updated.

Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen.

Can you edit the color of the bottom play bar on a slide once you assign the cpCmndShowPlaybar to 0

Can you edit the color of the bottom play bar on a slide once you assign the cpCmndShowPlaybar to 0. When I assign the slide this action it shows a grey shape at the bottom hiding the playbar controls, but I would like to make that color white to blend in with the white background on my webpage. How do you change the color?

It is not possible to change the border color by an (advanced) action, sorry. If you do not mind, you could choose the white color for the bottom border from the start. When the playbar is showing, provided it it stretched, it will cover up this bottom border.
Lilybiri

WHAT KIND OF FILES CAN YOU EDIT IN IMOVIE!

WHAT KIND OF FILES CAN YOU EDIT IN IMOVIE!

The PCMCIA digital TV tuner card I have is the Formac Watchandgo which I purchased here for the equivalent of around US$50:
http://www.formac.com/webapp/productsavwatchandgo.php
However, it is only usable in countries which use the PAL TV system (such as Europe and here in Australia).
I’m not familiar with the American NTSC TV system, or what TV tuners might be available. You will probably find most tuners are USB these days.

HT201085 can you share downloaded music with family members?

Can you share downloaded music with family members?

Hi olddawg66,
Welcome to the Apple Support Communities!
There is a new process called Family Sharing that I would suggest you take a look at.
Family Sharing
Have a great day,
Joe

Can you edit CRM records with {Tag_edit}

Similar Messages

Maybe you are looking for