Can you edit whole audio as one file?

I have done the bulk of transitions and mixing in final cut and just want to use soundtrack to eliminate some hiss and tiny bit of clean up can i send the audio as a complete file so I dont have to do multitrack and risk messing my mixes and transitions etc?

I do my complicated audio in Logic Pro, so I don't really understand Soundtrack Pro.
That said, if you want to apply one effect to the whole sequence in FCP,
you can nest the sequence:
1. Edit > Select All
2. Sequence > Nest (no need to mixdown audio if it's stereo)
3. Option-click on the nested Audio to open it in the Viewer.
4. Add your global effects.
Sweet!
Nesting is described in the FCS2 manual on page III-416.
It's a really useful technique. You can go back and
tweak the original edit, and the nested sequence will update.
BTW, when mixing digital audio, most folks set it to peak
around -12dB.
Note that if you have some clips that are too loud or soft,
it's best to adjust those clips' volumes, instead of squashing
the whole mix with a global limiter.
Finally, the best way to check if your mix levels are even
is to jump around to different locations of the timeline,
listening at a low level, making sure you can hear all the elements.
Sometimes the best way to even things out is to adjust the EQ
instead of the gain.

Similar Messages

Can you keep the audio of one video clip but add another clip?

Can you keep the audio of one video clip but add another clip?
I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

There are several way to do this;
Replace with clip...
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

Can you edit a person from one photo and add them to another photo?

Can you edit a person out of one photo and add them to another photo? Like if you need the head shot from one photo to replace closed eyes in the other photo? Thanks.

Thank you very much! Does this require software to be purchased? I'm new to Photoshop.
From: Bill Hunt <[email protected]>
To: Kittie Gugenheim <[email protected]>
Sent: Monday, April 25, 2011 11:46 AM
Subject: Re: Can you edit a person from one photo and add them to another photo?
Welcome to the forum.
Yes, this is done often. You will need to create a Mask of that person, to separate them from the background of the original Image.
I like to do this with a Layer Mask, as it offers control, and really does not alter the Image, so you can go back and make changes.
Let's say that you have Image 01 w/ the head of your subject, and want to place it into Image 02. In Image 01, make a rough Selection. I would include a bit of extra background, as we will take care of that in a moment. With that Selection active, Copy the head shot. Go to Image 02, and Paste it. It will Paste in its own Layer. Ctrl+T (Free Transform) can be used to Scale and also position that Layer with the head. Once you have that Scaled and positioned about where you want it, create a Layer Mask. In QuickMask Mode, just paint in the additional Mask to remove all traces of the background that came in with the head shot. As you can paint OUT, and also paint IN the Mask, you can work on this, as many times as you wish - even next year.
For getting that Layer Mask looking good, work slowly, also see this http://graphicssoft.about.com/od/photoshop/l/blrbps_5agirl.htm.
I've got another tutorial, that addresses the hair area, and will post that, when I find my bookmark.
Good luck,
Hunt

Can you edit text after saving your file as pdf

I have recently created a letterhead in Illustrator.
Is there a way to change a person name and title after saving it as a pdf file? I heard something about creating a form in Acrobat professsional.
I need to print out a letterhead with different peoples name and title. Any help would be appreciated. Thank you.

Can you edit the text in Acrobat Reader?
Yes, if you use Acrobat Pro to save the PDF as a Reader-enabled form.
1. Create your letterhead in Illustrator (or whatever). Leave design space for, but do not create text objects that you want to be editable.
2. Save as PDF.
3. Open the PDF in Acrobat Pro. Use Acrobat's Form tools to add text fields whereever you want the end users to be able to key text.
4. Select the Enable Reader Usage Rights command in Acrobat to make the form fields edtiable in Reader. Save the file.
Recipients of the PDF can now open it in Reader, edit the content of the fields, and save the file with their edits.
JET

Can you edit the title of downloaded files?

I am downloading a series of files from autio CDs. They are lanaguage lessons. However, the titles are either wrong for the lesson numbers, or are untitlted.
My plan is to put them on my IPhone so I can listen while driving. I wish to edit the titles so I can go from one to another in order.

Although my looking solved the problem, it was a right click that showed the info that could be edited. I did not understand what "command+1" meant.

Can you copy multiple audio (text to speech) files from one slide onto a new slide at once?

Can you copy multiple audio (text to speech) files from one slide onto a new slide at once? OR do you have to copy and paste each line of text to speech and insert into new slide?

Hi there
I believe that you end up with a single file that you can use. Once you get that created, it's an audio file in the library. You may then add the audio file to another slide or object by looking in the Library after choosing to add audio.
Cheers... Rick

Found Audacity for my background noise. Can I edit my audio files in the FCPX event folder in Finder?

I think I found the solution to my background noise problem using Audacity.
But can I edit my audio files that are in FCPX Event folder in Finder? Or do I actually have to edit my project all over again to put in new audio (edited by Audacity)?

No, copying the whole Project and Event is just too much of a waste of time.
Do this, in the Browser, select the audio file you need to take to Audacity. Export it as a Master File, and in the Settings section of the Share window, set Format to Audio Only. Set Audio File Format to AIFF. Set Open With to "Other" and select Audacity. Then pick your Desktop as the location to save the file.
In Audacity, do whatever it is you want and save it.
Back in FCP X, import the new "fixed" file, be sure to check the box to copy it to your Event folder.
Finally, if necessary, do a Replace edit with the new version to the old one if it has already be edited into a Timeline.

HOW CAN YOU PROCESS AN AUDIO FILE IN LABVIEW?I NEED TO TIME-PITCH SCALE IT

hello guys.
can you insert an audio file into labview for further processing?i need to get an audio file (stored on my computer) and further process it for time-pitch scale.does anybody know how?any pointers will much be appreciated.
regards
alex

hi there
open the "Graphics & Sound" palette from the functions menu to use vis for reading/Writing wavefiles, search the examples shipped with LV for first steps. use the VIs in the "Analyze" functions palette to modify the data.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Can you edit xml files in adobe contribute

can you edit xml files in adobe contribute

No, you can't even open them in recent versions of PSE.

WHAT KIND OF FILES CAN YOU EDIT IN IMOVIE!

WHAT KIND OF FILES CAN YOU EDIT IN IMOVIE!

The PCMCIA digital TV tuner card I have is the Formac Watchandgo which I purchased here for the equivalent of around US$50:
http://www.formac.com/webapp/productsavwatchandgo.php
However, it is only usable in countries which use the PAL TV system (such as Europe and here in Australia).
I’m not familiar with the American NTSC TV system, or what TV tuners might be available. You will probably find most tuners are USB these days.

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

Can you activate an iphone with one sim, and than once it is activated use it with another sim?

can you activate an iphone with one sim, and than once it is activated use it with another sim?

It could be the activation server is unavailable right now, however have you or anyone else ever used that computer to jailbreak or hack another phone? That can have an affect on the hosts file. You can check this regarding information on the hosts file or security software problems.
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.

Nikon D90 footage: Can you edit natively in Final Cut?

Just wondering if anyone has been using the new Nikon D90 to shoot video, and then importing the footage natively into FCP6. The camera's video-recording format, from what I have read, is 720p24, an .avi file, and a Motion JPEG codec.
I see that in the settings for a Final Cut sequence, you can choose 1280X720 frame size, a true 24 frames per second rate, and either a Motion JPEG A or Motion JPEG B compressor. It seems like with these settings, you could put your footage into the timeline and not have to render it before editing . . . unless the .avi file format goofs it up. Can you edit .avi in Final Cut natively, or do you have to use a Quicktime file?
Any workflow advice much appreciated,
Jim

No, sorry to say, I do not own the camera. And in looking around the web for an original, as-shot-by-the-D90 clip to experiment with, the only ones I found were at this site:
http://www.dpreview.com/news/0809/08090101nikond90samplegallery.asp
They were billed as: D90 sample movie 1 • original .AVI format • 21 seconds, 35.7 MB
and: D90 sample movie 3 • original .AVI format • 9 seconds, 24.5 MB
So I downloaded them, imported them into Final Cut, and they showed up with settings in the browser of: 1280X720 and 24 fps (so far so good) but then a compressor setting of "Apple OpenDML JPEG" rather than what I was expecting, Motion JPEG, which is what the D90 spec is. If the clip was truly "original .AVI format," I would have expected the compressor setting to be Motion JPEG.
Then, when I tried to change the sequence settings to Apple OpenDML JPEG, I found that there is no such setting. My thought was if the size, 1280X720, the frame rate, 24, and the compressor settings all matched, you could edit natively. And when I dragged the clip into the timeline, it did not give me a dialogue box asking if I would like the sequence settings to match the clip, the way it does with some footage.
Yes, you can render the clip and then edit it, but it would be great to avoid that step. Anyway, I got the red bar in the timeline with every combination of sequence compressor settings I tried, maybe 10 of them.
So maybe the answer is some time is needed for Final Cut to support the D90's Motion JPEG files natively, though I believe that is an older codec. Too bad the D90 does not record in something like DVCPRO HD. For a $1000 camera, the image quality looks pretty good, and the shallow depth of field really turned my head. I was thinking it might be a cheap Red Rock or Letus killer.
Thanks for the input,
Jim

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

Can you edit whole audio as one file?

Similar Messages

Maybe you are looking for