Can you explain the members of AIRealMatrix?

Hello,
AIRealMatrix has the follwing members in CS4
ASReal
a
ASReal
b
ASReal
c
ASReal
d
ASReal
tx
ASReal
ty
please explain what is each point represents?

This is a pretty standard transformation matrix structure. a, b, c & d are the usual 2 x 2 matrix that indicates rotation & scaling. tx & ty are the translation to the point around which the scaling & rotation are performed (usually its a translation back to the origin unless you have a good reason otherwise). You're probably better off looking at Wikipedia or Wolfrum if you need more explanations on this but the good news its very common so there should be a lot of useful explanations -- its really outside of the scope of this forum.

Similar Messages

Can you explain the difference

Hi,
Gurus, I have executed two queries, using TKPROF took output, unfortunately, I couldnt see the difference, can you please tell me is there any difference between these two queries ... ?
sql>exec dbms_monitor.session_trace_enable( waits=>true );
Case 1
=====
SQL> select count(*) from afe_reports;
COUNT(*)
6
Execution Plan
Plan hash value: 2793097447
| Id | Operation | Name | Rows | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 2 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | | |
| 2 | TABLE ACCESS FULL| AFE_REPORTS | 6 | 2 (0)| 00:00:01 |
Statistics
0 recursive calls
0 db block gets
3 consistent gets
0 physical reads
0 redo size
227 bytes sent via SQL*Net to client
240 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
Case 2
======
SQL> select count(1) from afe_reports;
COUNT(1)
6
Execution Plan
Plan hash value: 2793097447
| Id | Operation | Name | Rows | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 2 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | | |
| 2 | TABLE ACCESS FULL| AFE_REPORTS | 6 | 2 (0)| 00:00:01 |
Statistics
1 recursive calls
0 db block gets
3 consistent gets
0 physical reads
0 redo size
227 bytes sent via SQL*Net to client
240 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
Select count(*) from afe_reports ---- 1st query
Select count(1) from afe_reports ----- 2nd query
Regards

S both of us already told you there is no difference between the two. So, it is upto you to decide - whether you want to use count(*) or count(1).
It hardly matters.
After all it consumes the same resource and perform the same task.
So, It is your choice.
Enjoy!
Regards.
Satyaki De.

Can you explain the code ?

Hi friends i have got a code its working fine but i am not getting the concept in the code can any one tell which line is the ITAB declaration and which lines are workarea declarations of the structure.
TYPES: BEGIN OF ST_ZWS,
            RADIO TYPE C,
            DESCRIPTION TYPE ZRIF_WS-DESCRIPTION,
      END OF ST_ZWS.
DATA: IT_ST TYPE TABLE OF ST_ZWS,
       WA_ST TYPE ST_ZWS,
      IT_ZWS TYPE ZWS,
      WA_ZWS TYPE ZWS.
Please explain the code here...

hello
the code is as follows:
This part of the code defines structure st_zws.
TYPES: BEGIN OF ST_ZWS,
RADIO TYPE C,
DESCRIPTION TYPE ZRIF_WS-DESCRIPTION,
END OF ST_ZWS.
Based on the above defined structure, this statement defines one internal table
DATA: IT_ST TYPE TABLE OF ST_ZWS,
This statement defines work area to the above defined Internal table
WA_ST TYPE ST_ZWS,
This statement defines another internal table with reference to ZWS
IT_ZWS TYPE ZWS,
This statement defines workare to the above defined internal table
WA_ZWS TYPE ZWS.
cheers!!!

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

Can you explain steps in the Async and Sync scenarios JDBC to RFC.

Hi,
Can you explain some basic steps in the Async and Sync scenarios for sending data from JDBC to RFC.
Like,
The data is picked up from the database table through JDBC adapter.
It is passed on to SAP by calling the RFC. RFC gets executed
successfully. The status is returned by the RFC. The status needs to be
updated back into the SQL database table.
Is this a sync case or async case.
What si the diffrences in the sync and async scenarios in the above JDBC to RFC scenarios.
Soorya

hi check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
JDBC Synchronous call using BPM
Data Types -
1) File Input
2) JDBC Req
3) JDBC Response
4) File Response of similar type of JDBC Response.. ( This you can avoid also..let it be for first time)
Message Types
4 for each data type
Message Interfaces
1) Async, Outbound, Interface, to receieve the file
2) Async, Inbound , Interface to send the file from XI
3) Async, Absract , Interface of type File message type to recieve the message in the BPM
4) Sync, Abstract Interface with Req message type as File Request, and Response Message type as a file Response
5) Sync , Inbound interface for JDBC with Input message type as a JDBC Request and Output Message type as a JDBC Response
Message Mapping:
1)Mapping between File Req to the JDBC req
2) JDBC Response to File Response
Interface mapping:
1) Sender Interface as a Sync,Abstract Interface created for the file type and target interface as Synchrnous JDBC interface.
Use corresponding mapping for Req and Resp..
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would th yellow -sign. As you gather I am new to this program having only used Final Cut Express 4

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial version

Check System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.

Can you explain detail what is Open PR's, PO's ?

hi,dear all,
Can you explain detail what is Open PR's, PO's ?
Thank you!

Hi,
Purchase Orders created and yet to received the Materials from the Vendors, and or yet to do the Invoice Verfication or quality Inspection for the received goods from Vendor in all such cases you call them Open Purchase orders.
During SAP Go-live date, we decide Cut-off dates for PR's, POs, Prod Orders, etc
which ever order Opened but yet to complete or in execution stage.
<b>Basically this is Status of the Order.</b>
Regards
Rehman
Reward Your Points If Useful

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

Can you use the same charging cable for both an iPhone and an IPad or are they different? When I use the charging cable for my iPhone on my Ipad, it doesn't charge.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

TS3989 Can you use the search function in a shared photo stream? How?

Can you use the search function in a shared photo stream? When I try to search in the shared photo stream it goes to search in my photos.

I'm not sure there is a solution to your question, other than to not keep so many photos on your devices. If you delete a photo from photo stream, it will delete it from all your devices. To keep them, first save them to your camera roll (tap Edit, tap the photos, tap Share, tap Save to Camera Roll), then import them to your computer as explained here: http://support.apple.com/kb/HT4083. However, given the number of photos you have, a much more practical solution would be to transfer them to your computer using an app like PhotoSync, which will select them all at once and transfer them over wifi.
I'm not sure why you're seeing such a discrepancy in the amount of space taken up by your photos. It's possible that something is corrupt given the large number of photos on your device.

Can someone explain the use of a hashtable in java?

can someone explain the use of a hashtable in java?

Hashtable allows us to store values along with keys.
One other advantage is, it provides Synchronised methods.
Hope you got it.

Can someone explain the hyperthreading settings in cmos (the 4x,5x, etc.)?

Someone once said admitting you don't know something is the first step on the road to knowledge....or something like that
Can someone explain the hyperthreading setting in the CMOS Setup - mine is set to 5x, which I think is correct for my cpu - Venice 3500+, but I don't really know what it does. What does that setting affect? I think it was 4x by default, until I loaded optimal settings, and it went to 5x.....

HT = Hyper Transport
Q: What is HyperTransport™ technology?
A: HyperTransport™ technology is a new high speed, high performance point-to-point link for interconnecting integrated circuits on a motherboard. It can be significantly faster than a PCI bus for an equivalent number of pins. HyperTransport was previously codenamed Lightning Data Transport, or LDT. HyperTransport technology was invented by AMD and perfected with the help of several partners throughout the industry. It is primarily targeted for the IT and Telecomm industries, but any application where high speed, low latency and scalability is necessary can potentially take advantage of HyperTransport technology. HyperTransport technology was invented in order to unleash the tremendous power of the AMD microprocessors. HyperTransport is planned to bring the computation experience to a new level.
Hyperthreading Technology used by Intel.

Can anyone explain the function BAPI_PROJECT_GETINFO

Hi
Can anyone explain the function BAPI_PROJECT_GETINFO.
Can anyone explain the import and export parameters of this function module.
What is the logic.
I'm getting the output as 'No data record exists'.
This is immediately required.Please help me.
Thanking you
Chandrika.

hi
good
go trhough this
Short text
Read detailed information for work breakdown structures
Functionality
You use this method to read detailed information about project definitions and the WBS elements of certain projects from the system.
Notes
Enter the project definitions and/or the WBS elements, which you want detailed information about, in the parameter PROJECT_DEFINITION or I_WBS_ELEMENT_TABLE respectively.
If you only enter project definitions, the details of all the WBS that belong to the project definitions are read including the hierarchy. If you explicitly enter WBS elements, only these are read.
Messages are returned in Return parameters. For information about the return values and their meaning, see the parameter documentation.
Parameter
PROJECT_DEFINITION
WITH_ACTIVITIES
WITH_MILESTONES
WITH_SUBTREE
E_PROJECT_DEFINITION
RETURN
I_WBS_ELEMENT_TABLE
E_WBS_ELEMENT_TABLE
E_WBS_MILESTONE_TABLE
E_WBS_HIERARCHIE_TABLE
E_ACTIVITY_TABLE
E_MESSAGE_TABLE
thanks
mrutyun^

Can anyone explain the functionality of FM f4ut_parameter_get_values ?

Can anyone explain the functionality of FM f4ut_parameter_get_values ?
This is used in search help to retrive values from screen.This doesnt seem to work for me

hi,
check this
F4UT_PARAMETER_VALUE_GET
Short Text
Standard search help exit for determining contents of a srch help par.
FunctionalityBy calling this module in a search help exit, you can find out the current contents of a search help parameter . To do this, you must pass the name of the parameter in PARAMETER.
You must distinguish between the parameter contents that are used in the selection process of the input help process and the parameter contents that are determined by the selection process and the user selection.
Parameter contents that are used in the selection process are default values of search help parameters, values that are included in the input help process by attaching the search help to the screen from field contents of the screen or its module pool, and possibly complex restrictions made by the user in the dialog box for restricting value. Such parameter contents can also be included in the input help process by the search help exit itself.
The contents of the specified parameter used in the selection process are stored as complex restrictions in SELOPT_TAB after the call. If exactly one value is defined by these complex restrictions (for example if the restrictions have exactly one row and if SIGN = 'I' and OPTION = 'EQ' for this row), this unique value can be found in VALUE.
Parameter contents that are determined by selection process and user selection are the parameter contents that are shown in the dialog box for displaying the hit list or returned on the screen. They are managed by the F4 processor in RECORD_TAB.
This module enables you to transfer the information about the specified parameters from RECORD_TAB to RESULTS_TAB in edited form.
Pass the name of the field of RESULTS_TAB that should contain the contents of the parameter to the function module in parameter FIELDNAME. If the row type of RESULTS_TAB is elementary, pass the value '*' in FIELDNAME. The rest of RESULTS_TAB is not changed. The values are copied row by row. By removing rows at the end or by adding intiial rows you can make sure that RESULTS_TAB has exactly as many rows as RECOD_TAB.
Example
You can find an example of the second kind of use of the module in the search help exit SAPBC_GLOBAL_F4_SFLIGHT of search help SFLIGHT.
Both types of use can be found in the search help exit SAPBC_GLOBAL_F4_SFLIGHT_MIN_FR of search help SFLIGHT_MIN_FREE .
Notes
1. Parameters OFF_RESULT and LEN_RESULT should not be used any more since there are basic problems when using UNICODE. The contents of these parameter are still analyzed when parameter FILEDNAME is initial for compatibility reasons.
2. Only the dialog box for restricting values can normally produce complex restrictions for a parameter.
3. If VALUE has the value SPACE, this means that either there are complex restrictions for the parameter or the unique contents are SPACE. SELOPT_TAB must be evaluated in order to determine which of these is the case.
4. If the search help does not have any parameter with the given name, the exception PARAMETER_UNKNOWN is triggered.
5. Only parameter contents for the search help displayed in the hit list or the EXPORT parameters of the search help are first managed in RECORD_TAB. If the specified parameter does not satisfy one of these conditions and if parameter RESULTS_TAB is specified in the call, the exception PARAMETER_UNKNOWN can also be triggered. This is not true, however, if results were already entered for the parameter with function module F4UT_PARAMETER_RESULTS_PUT or if space was reserved for the parameter in RECORD_TAB with function module F4UT_PARAMETER_ALLOCATE. The parameter therefore should only be defined if information about the parameter contents are really required.
6. The header lines of the specified parameter are also transferred from RECORD_TAB to RESULTS_TAB.
7. The other parameters of this module must be defined as the parameters of the search help exit having the same name, but they are not changed by this module.
8. RESULTS_TAB should be a standard table.
9. The contents of the specified parameter in RECORD_TAB are copied to the specified field of table RESULTS_TAB with a MOVE of the correct type. If this is not possible, the target field is assigned the initial value.
10. If RESULTS_TAB has no field with the name specified by FIELDNAME, only the number of rows of RESULTS_TAB is adjusted to those of RECORD_TAB as described.
Parameters
PARAMETER
OFF_RESULT
LEN_RESULT
FIELDNAME
VALUE
SHLP
CALLCONTROL
SHLP_TAB
RECORD_TAB
SELOPT_TAB
RESULTS_TAB
Exceptions
PARAMETER_UNKNOWN
Function Group
SF4U
if helpful reward some points.
with regards,
Suresh Aluri.

Can anyone explain the advantage of iPod vs iPad over Kobo Vox for reading iBooks?

Can anyone explain the advantage of iPod vs iPad over Kobo Vox for reading iBooks?

Thank you Alan and know you are right. I really can do all I need with my netbook and ereader and do not need the ipad. I think I just wanted something new and felt I may enjoy using it a lttle more than the netook. But it would be a waste just to buy one when I donlt acutally need it And, donl't think it is worth the extra money for me the get the 4g wireless capability since I doubt I would really need it often.
I may treat myself to the Ipad for the color, touchpad and fun to use but it is very expensive considering how little it will do for me no more than the things I want it for. It woudl be and expensive luxuray, I can do without. I actually need t learn how to use more of the function avaiable first. Maybe I should take up playing games and learning to take digital pictures so I can at least load them. If I could learn to do that and take a decent picture, I could start selling back all the "stuff" I have purchased on ebay. haha - I do have a nice doll collection, I would like to sell. I just do not have room for anything else. That was the primary purpose for the Kindle Ereader I bought and enjoy so much,
But, I will hold onto the thought for a while and see how it goes and what other comments I get, If I think I cannot live without it, then I will have to rethink which one to buy, I coud get the 32 g if I did not have to pay for the 4g wireless. And, if I knew I could get help to teach me how to use and enjoy all the functions, I would give it more serious consideration. My granddaugther got one for Christmas and that was what got me interested in it. I love the size of the screen and it had good color and was fast. She even had an application where she could write her notes and it would convert into typed words. That was a neat feature, If you could print it?
But thanks again for your comments and I will check later to see I get any other feedback.
Sunny:)

Can anyone explain the use of PhantomReference

Can anyone explain the use of PhantomReference( if possible by an example..).

Payment request is a noted document and as such does not pass any accounting entry. For effecting a payment to a
Against the payment request you can effect the down payment. Suppose u have completly automated payment system and if you want to effect a down payment, you can do it only by payment request.
Payment requests can be controlled through workflow for proper autorization.

Can you explain the members of AIRealMatrix?

Similar Messages

Maybe you are looking for