Can you export a Quicktime with multiple audio tracks?

I have a video with split audio tracks.
I'd like to archive a copy that retains all the individual tracks so that other people could just open the file later and not have to reconstruct the tracks (i could certainly archive all the tracks individually).
the problem i'm having is that FCP seems to only want to allow me to export 2 tracks of audio. I may be missing a setting, but i'm not sure.
I can digitize a clip from a digibeta with 4+ tracks, and when i open the clip in QT, it recognizes the individual tracks, so it seems as if the capabilities are there.
have they just not been integrated yet?

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Similar Messages

Export to Quicktime with multiple Audio Tracks?

Hi all --
I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
Can anyone help?
Thanks!

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

Exporting QT file with multiple audio tracks

I'm trying to create a digibeta tape of my movie. The company who does it wanted a QuickTime file with the movie where there were 2 audio tracks (4 in sterio). One with the music and sound effects and another with narration and interviews. I'm not sure if this is possible or where to set the option for this. Can anyone help?

Command+0 (zero) to bring up Sequence Settings, go to the Audio Outputs tab and change the Outputs to 4 whilst keeping the Grouping as Stereo.
Back on the timeline, ensure your audio media is on the correct audio track for export, eg, all music on 7&8 , 9&10, VO on 5 and/or 6 , etc etc. Basically, keeping an organised timeline without spreading audio over random tracks really helps.
Ensure the audio tracks are assigned to the correct channels. To do this, on the timeline you see the 'destination buttons' A1 A2 A3 A4 A5 A6 etc etc... next to each button is a padlock, then you have the Toggle Auto Select icon. Control-click on this icon and you'll see the Audio Outputs setting, which shows which stereo pair that particular track is assigned to. In this case, you'll want to assign Music and Effects to 3&4, whilst keeping narration and interviews on 1&2.
Export Quicktime Movie.

Exporting a project with multiple audio tracks changes the loudness level regardless of export format

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
After a bit of troubleshooting I found a workaround. I mixdown all of the tracks in adobe audtion to one track and then imported it into premeire.
Once I did this the audio loudness was not changed after exporting.
Workflow for when it didn't work.
I used edit in adobe audtion for the audio tracks from premiere.
Matched the audio to the loudness level I wanted, and then saved each track.
Export from premiere.
To Check Audio Loudness
Bring in exported file into new premiere project
Edit the audio in adobe audtion.
Drag the audio file into match audio to check loudness level.
I am using
Adobe Premiere Pro CC v8.1
Windows 7 on PC
Please fix this adobe.

I recently had to submit a TVC and discovered that premiere was changing the loudness level after export, when the TVC failed the quality check.
I checked the audio loudness of other formats that I had exported and the same thing had happened the audio loudness, it had changed.
I have never experienced that or had any need for a work around.
What did your Broadcast Quality Control pick up on?
Audio Levels and Loudness are two different things in this regard.

Working with multiple audio tracks

Hello,
I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
BTW I'm working in FCP 7.
Thanks,
Thien

One way:
Lock the video track.
Use the Edit Selection Tool to Select the audio transition points
This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
which gives me the displacement of all the tracks that I wanted:
You can use this quite quickly once you get used to it.
MtD

Any way to export QuickTime w/ multiple audio tracks?

I remember seeing QuickTime movies where on playback you can select which audio tracks to listen to. Kind of like director's commentary or different language versions for the same video stream...
Is there a how-to guide for making a movie like this in FCP? We have one video file and multiple audio files that we've placed in different tracks in the timeline but when we export to a QuickTime movie they get all merged together. We tried setting it up with multiple audio channels and then control-clicking to get that menu with each audio track and putting them into the different channels, but there must be something we're missing...
Is this something only FCP 6 can do? I think we have version 5.
thanks!

I'm a little rusty on this - and without access to FCP 5 at the immediate moment - but I think the key is to set your sequence to have multiple (as in more than 2) audio outputs, then select Channel-Grouped for audio during the Export via QT Conversion.
If that doesn't work, you could always paste additional audio tracks onto your movie in QT Pro. After all, you'll need to tweak your language settings for audio track in QT Pro.
But where have you seen this implemented to do a Director's commentary-type option? I've read that multiple (discrete) audio tracks work only if they're tagged as different languages and the user's playback system is setup for one of those languages. (But I've been wrong before...)
And welcome to the forums.

Exporting Quicktime with discreet audio tracks

How in FCP do you export a quicktime file with more than two channels of audio that are discreet?

Hi -
For FCP 7:
Click on your timeline.
Type Command - 0 (Zero) and click on the Audio Outputs Tab.
Change the number of outputs you want, and set the track pairs up as stereo or dual mono, as you want.
Click OK, a warning dialog box will come up that you can dismiss.
On the timeline, Option-Click on each audio track right below the auto-select toggle icon, and from the drop down menu, route the track to the desired output track.
When done, export the Quicktime movie.
The only way you will verify that all the tracks are there is to either open the exported quicktime in Quicktime pro and menu Window > Show Movie Properties. You'll see the additional tracks listed there -OR- just import the exported movie back into FCP and bring it up in the Viewer, you'll see all the audio tracks.
Make sure you restore your sequence back to two channel ouput, if you want, when you are done.
Hope this helps.

Can you export whole folders with meta data in tact

Can you export folders or groups of photos including all the meta data eg keywords, gps etc to a new folder?
I then could copy these to my xbox for viewing for example?
cheers

managed to have a bit mess, you can actually highlight an event, album, places, faces etc in the source list, the choose file > export and it does all included in that folder/album/source, rather than highlighting them individually.
The reason for wanting to do this, is I want to be able to export to some kind of structure outside of iPhoto for my Windows PC, Xbox etc for showing, but want all the keywords, GPS, meta data on
cheers

Creating Video with Multiple Audio Tracks?

Not sure if this is the right place to post this question but I figured its compression/video codec related so someone might have an idea...
I've used Handbrake in the past to rip a DVD with an audio commentary that allowed for multiple audio tracks that could be played back in iTunes/Quicktime (though not on the iPod Classic for some reason... perhaps someone knows the answer to this?)
I was just curious as to whether or not this was possible to do WITHOUT first making a DVD with an 2ndary track? I was hoping to record audio commentary for one of my shorts, and put it up on the web, but wanted to avoid the step of going to dvd first then ripping it.
is this achievable in compressor? do I need to use a third party app? thanks so much.

ehmjay wrote:
is there any app (be it from apple or a 3rd party tool) that will allow me to add a secondary audio track for switching in quicktime/iTunes? if so could you point me in the direction of it (or even instructions)
I'm afraid I'm unaware of anything - outside of HandBrake - that does encode a second track of audio. But I haven't exactly had my eyes open since I haven't needed to do this for a client yet.
handbrake mentinos that its able to rip secondary audio for use with iPod Classic/Apple TV... however so far it hasn't worked for me. Does this mean that while handbrake is doing it properly its just my iPod itself that's having the troubles (like I said that alt. audio is there in iTunes/Quicktime just not on the iPod itself)
I am pretty sure that the issue is that the software for iPod Classics - as is the case with AppleTV and, even, QT Player - which won't allow you to switch over to the other track. But I haven't had to work with the Classic in a while, perhaps there is a setting in Audio (or Video) that gives you the pop-up option you're seeking?

Video with Multiple Audio Tracks-- IOS 4.2 Removes Way to Select Them

After upgrading to IOS 4.2 on my iPhone 4, I've found it no longer lets me select from among multiple audio tracks. The option and button is completely gone.
I encode my videos with AC3 audio as the first track (for my home media devices), and stereo audio as the second track (for the iPhone). Now the iPhone will just play the video, with no audio, and no way to select another track. This is extremely frustrating as I've encoded all my DVDs this way, and never had any issue with playback like this on any IOS device going back to the first gen iPod Touch.
Anyone else have this issue, and know of a work around? Thanks!

I too have the exact same problem for the exact same reason. Did you ever figure out a workaround (other than reencoding all your videos)?

Issues with multiple audio tracks

Hello everyone. I need some help with my DVD Reel. … Please
I have a DVDSP project that I’ve been using and updating for the last year. It contains over 100 small 4-minute clips (Mpeg-2 Video + AC3 Audio) plus a lot of menus and buttons….
Everything worked nice and perfect… except that I added some surround clips last week (using stories)… so now I have one audio track (A1) with all stereo audio and a second audio track (A2) with my surround audio. Again, no problems until today when I used the same track to add a new clip with stereo audio only (A1)…. And it doesn’t want to playback on DVD Player (but it plays in the simulator)…
…. Now here is the question. Does the additional (surround) audio track have anything to do with this problem or is there any other reason why the stereo clip didn’t want to play after the surround clip? … or Do I need to create stories for my stereo clips from now on?
Some more information: I’m using Final Cut Pro and Compressor to crate my media… Intel Mac OS X… DVD Studio Pro Version 4.1.2.
Thanks for your help
Adriana

Got an almost kind of (but not really) similar problem. I have videos with multiple audio (AAC and AC3 passthru) in an m4v file. the AAC is always defaulted with the "enable" tick in the properties box. I've tried almost everything I can think of to enable the AC3 track by default so that frontrow or QT will play it. but everytime I save (even save-as) it defaults back to the AAC stereo.
Any ideas? is this a "feature" of 7.5.5?

No audio on files with multiple audio tracks

All my files that have multiple audio tracks (e.g. stereo and surround) no longer have audio when I initially start up my Apple TV 2. When I manually change the audio track in the menu (from stereo to surround or vice versa), I get the sound back but I would have to do this with every single file and do this each time I start up my Apple TV. Anyone else notice this problem. This only started happening after the most recent update.

Hi,
AC'97 Audio for Vista/Win7 here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Export Video with Multiple Audio Tracks

I need to be able to export video with audio on multiple tracks. I have moved to CS6 from FCP 7 where this was rather easy to do. I can make a preset in AME with more than enough mono tracks but after the encode the video is always smashed to one mono track. I am not doing a 5.1 mix, there are different mic's on each track that need to remain independant of one another and mixing them down within Premiere is not feasable. Are there no options to just have the audio 'pass through' like Compressor? Sorry if there are other posts but I have been searching forever and can not find a simple answer on this topic.
Also, is there no way to have the source timecode burn in? Putting a filter on the video in a sequence is unacceptable, I am very displeased to find that this doesn's seem possible in AME or Premiere, it has been part of Apple's suite for years.
Example of my preset from Compressor:
Name: Apple ProRes 422 (Proxy)
Description: QuickTime movie with Apple ProRes 422 (Proxy) and audio pass-through
File Extension: mov
Estimated size: unknown
Audio: multi-track pass-through
Video Encoder
          Width: (100% of source)
          Height: (100% of source)
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: Apple ProRes 422 (Proxy)
          Multi-pass: Off, frame reorder: Off
          Automatic gamma correction
Progressive
          Pixel depth: 24
          Spatial quality: 50
          Min. Spatial quality: 0
          Temporal quality: 0
          Min. temporal quality: 0
Timecode Generator
          Position: Lower Right--Title Safe
          Alpha: 1.000
          Label: Source Timecode
          Start Timecode at 00:00:00:00 false
          Text Color: r:0.0000, g:0.0000, b:0.0000
          Font: Helvetica, 36

Hi James,
For exporting a multitrack .wav file, you have to start a project with a multichannel audiomaster (3-16 tracks).
Copy and paste your complete edit to the new editsetting.
Now in the audiomixer you can route your audiolayers to the multichannel you like.
(CH1+2 pan to left is channel 1, pan to right is channel 2 and for a stereo track pan to center : channel 1 for left and channel 2 for right.)
Then you export your project to a 3-16 tracks multitrack .wav file.
When you need mono tracks you can import your multitrack .wav file in premiere. Then send it to Audition (edit in Audition) and then adobe will convert the file into mono tracks.
You'll find the mono tracks in your audio capture folder or can premiere search for then by 'reveal in explorer'.
The multi track .wav file has got timecode within the file.
When exporting in QT you can also choose for a multitrack audio file. It also contains your timeline timecode.
.avi or .mp4 video files cannot be exported with more than 5.1 channels of audio
MXF OP1a in XDCAMHD can also be exported with max. 16 channels of audio. It also contains your timeline timecode.
Hopefully you can get further with Premiere Pro with this info.
Succes with it!!
gr. Mano

Exporting quicktime with 4 audio tracks for broadcast

Hi,
Does anyone know how to do this? i need to get a program out to a broadcast quicktime file with sync on 1&2 and M&E on 3&4, i have the sequence setup correctly as did a digi playout for the same thing which was fine. However, if i do 'export quicktime' with sequence settings i only get two audio chanels. If i go to quicktime conversion then all the drop down menus for multiple audio chanels are greyed out.
Any ideas?
Best,
GK

if i do 'export quicktime' with sequence settings i only get two audio chanels
how are up you assessing this? QT Player has only 2 playback channels and additional channels will be mixed down to those ... but if you press Cmd-J to open the movie properties you should see all 4 channels are there, or if you reimport your exported file back into FCP you'll see it contain the 4 audio tracks as exported ... if not then your export settings are not correct :/

How can I export a Quicktime with Alpha embedded?

I have a few titles that I've created in Premiere. I've placed these titles into their own sequence and would like to export them as a Quicktime movie using the Animation codec with an embedded alpha channel (Millions+) so that I can import it into After Effects and do some animation work with them. I don't want them against black though.
When I Export Media in Premiere and select Quicktime with the Animation codec, the "code settings" button is greyed out.
Please help. There must be a way to export media with an embedded alpha channel like you can in FCP.
Thanks.

WoOWavE_Sync_Pro,
I don't see what is complicated about it at all. I don't mean to start an argument, but making a title is easy, exporting it with an Alpha channel is easy (as shown above). Where is the problem? Why go to TIFF? I certainly would never "export normally and key out the backgrounf (sic) in AE"
Perhaps you would care to explain your comments in more detail?
If you are interested in the font style I used, it came from Tim Kolb back in the CS3 days or before. I have a link to his styles on my web site. I used to count the downloads, but over the years I lost track.
Of course, having said that, if I was going to have a complicated title with motion, I would use AE to begin with. And I would probably use a downloaded template as a starting point. But that is because other people are more creative than I am. I am just a techie dabbling on the creative side of things.
By the way, I suppose I should get around to testing your product. If I like it, I will post a link on my web site to direct people to it. Feel free to send me an email from my web site telling me why people should use it and what you want people to know about it. And you might want to suggest how to test it as well. I used to get a LOT of visitors every day. It has cut way back since I have not been updating it. Now that I have started to update it again, I expect the visitor count will rise again. The moderator is only doing his/her job. This is a site sponsored by a corporation, and advertising for other companies is probably not good form (besides being against the rules).
http://www.stevengotz.com

Can you export a Quicktime with multiple audio tracks?

Similar Messages

Maybe you are looking for