Can you filter iTunes search results by video or audio podcasts?

I have been searching for hours and haven't found a definite answer. Anyone know if this is possible?
Can you filter iTunes search results by video or audio podcasts?

I'm having the same problem. I go to Podcasts/Video Podcasts/News and they only give the featured, favorites (whose?), etc. I want to see all video news podcasts but if I then click on see all, it drops the video classification and shows all news podcasts. The iTunes search in general leaves a lot to be desired; its not very intuitive or pleasant to use, not the usual Apple experience.

Similar Messages

Can you refine people search results using a SharePoint 2013 search service application connected in SharePoint 2010?

We have an SP2010 farm which is now using some of the service applications from an SP2013 farm, including the search, managed metadata and user profile. This is part of an upgrade programme of work which will involve upgrading infrastructure and
then gradually the sites, and this is seen as one way to minimise the impact.
So, the SP2010 search results are being generated by the SP2013 which is indexing the SP2010 content. The initial results appear fine, however, the refiners in the people results for Job Title and Department are no longer working. We are receiving
a 404 page not found, even though the page is there as was working before.
If we compare the URL generated in SP2010 for refining results to an OOTB SP2013 search centre site, there is clearly a big difference to the format. Example below is where LastName is Smith and then refined where Department is HR.
SP2010 URL which now gives a 404 error:
http://intranet2010/search/pages/peopleresults.aspx?k=LastName%3Asmith&r=%22owstaxIdSPShDepartment%22%3D%23832e3479%2Dd168%2D4620%2Dac69%2D9b00a4c4205b%3A%22HR%22
OOTB SP2013 URL:
http://intranet2013/search/pages/peopleresults.aspx?k%3Asmith#Default=%7B%22k%22%3A%22smith%22%2C%22r%22%3A%5B%7B%22n%22%3A%22Department%22%2C%22t%22%3A%5B%22%5C%22%C7%82%C7%824335%5C%22%22%5D%2C%22o%22%3A%22and%22%2C%22m%22%3Anull%2C%22k%22%3Afalse%7D%5D%7D
I've looked at the URL decoded versions so can see how the query is built up.
Any ideas? Is this even possible?
Matt

All working now. Turns out there was an entry in the web.config which was causing issues.
<denyQueryStringSequences>
<add sequence="ID" />
</denyQueryStringSequences>
Seems IIS is denying something in the query string. We removed the whole section as was not needed.
http://www.iis.net/configreference/system.webserver/security/requestfiltering/denyquerystringsequences
Thanks to a colleague who spotted this; I would've never of thought to check the web.config for something like this.

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

I keep getting exact duplicate songs in playlists and libraries, how can you filter this out when upgrading these lists, or sync to the same device again? And how to do it without going through each and every P'list or Library ?

I have Windows XP-Pro SP3, the latest upgrades of Three media players, iTunes being the default player. I keep getting duplicates in playlists, libraries etc., of the same version of song. Everytime i make a change or renew my media to device or SYNC it wants to add duplicates to the computer disk, lists etc. Can you filter out same copies without having to edit each and every song, which in my case is quite large. For instance if you want to convert all mpeg, or mp4-a files to AAC you will end up with duplicates of each file type. Or you sync to an ipod, the library adds to itself---- including copies of songs already in it, if in a different file version.

Your refer to:
" if you want to convert all mpeg, or mp4-a files to AAC "
This will always duplicate files within iTunes. I need to ask why you're doing this conversion - all formats are compatible with iTunes, and conversion between mp3 and AAC will always involve some loss of quality.

How can i download full search results

I have a requirement of downloading the ucm search results. However the ucm search only gives 200 by default..
How can i download full search results. plz share if u know.

In this case, you can temporarily increase the number of returned rows as described e.g. here: increase the number of documents by result page

Can I force iTunes to sync a video even if it says it's not compatible?

I have a video podcast where iTunes refuses to sync some of the videos even though I know they are compatible. When I stream them on my iPod touch from the iTunes store, they play. When I download them directly to my iPod, they play. When I sync my iPod, the videos are removed and iTunes says they aren't compatible with this iPod. Can I force iTunes to sync the videos? Are there other ways to fix this?

Yes, but the issue is the IP address. If you have a static IP from your ISP it is easy.. Or if you use another router with dyndns it is easy.. but Apple make it exclusive to their network so you can have loads of issues without a computer to function as a client for dns.
Look up remote Time Capsule access .. there is plenty of info out there.

How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

JasonFromSK wrote:
With the newest Airport firmware (7.6.1), it seems I should be able to do this.
Really? I need to check that out!
You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
AC

HT5622 Can you share ITunes purchases across multiple Apple ID's within a family? I want to share my music library and apps with my kids, but not have their ipones tied to my Apple ID. What's the best set-up to accomplish this?

Can you share Itunes purchases with family members without them using your Apple ID?

SHARING iTunes MUSIC
http://macmost.com/five-ways-to-share-music-in-itunes.html
Sharing Apps with Family
http://macmost.com/sharing-ios-apps-with-family.html
More Info here > Here-

Can you install iTunes twice on same computer for different accounts?

Can you install itunes twice on a mac for different accounts?

There are a couple of ways you can do this, have a look at this guide: "How to use multiple iPods with one computer" http://docs.info.apple.com/article.html?artnum=300432

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Prompted to upgrade iTunes on computer. Won't let me and get error message MSVVR80.dll not found. Attempted to reinstall, won't let me. Can you have iTunes and iCloud on the same computer?

Try following the instructions of tt2 in https://discussions.apple.com/thread/5822086

Can you install itunes on more than one computer?

Hi all,
I want to install the software for my first-generation ipod mini on my friend's computer, but I heard somewhere that you can only install the software on one computer and obviously I also want to be able to use it with my own computer as well. Can you install itunes software that comes with your ipod mini on as many computers as you want or only one?
Many thanks,
Samantha

Sure you can. But instead of using the (more than likely) outdated CD, see the iTunes Download Page

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Can you filter a custom report by postcode? I want to send an email marketing campaign to customers

Can you filter a custom report by postcode? I want to send an email marketing campaign to customers within a postcode range. How do you do this? Thanks.

Hey RP in Oz,
You can run a contacts report and select 'Default Address Type' as an 'Address Details Field' which will include the zip code a customer has inputted. You can then export the report, open it up in Excel (or similar) and filter based on the postcode. Once you have modified the list in excel, formatted it correctly and are satisfied, you can then import the report as a mailing list via E-Mail Marketing > Mailing Lists.

Can you have a look at this video and give advice please?

Hi Guys,
Can you have a look at this video-
http://www.youtube.com/watch?v=UA0x3bQUW-g
I shot it for a friend at a hotel. Can you let me know if if works ok / stutters etc. on your computer.
I edited hdv pal / ppro cs3 then adobe media encoder to H 264 1280 x 720 25fps bitrate min 2 max 4. keyframes 25.
It looks pretty bad i think at the normal youtube. It looks a lot better when you hit the 'watch in hd' but begins to stutter.
Do you have any advice?
Many thanks
scott

First, thank you for doing a very nice piece. I'm a tad bit tired of the "in-your-face" skateboarding pieces. The young lady is also "easy on the eyes."
Second, I looked at the piece in both resolutions, and also after all buffering had completed. The only things that I saw were one Transition at about the 1/4 point that seemed to have about a 1-frame "glitch," or something. Two of the Titles also did not seem to fade-up/move-in at the same pace, or with the same smoothness as the others. Even looking at movement, like the flag (again near the 1/4 mark - sorry that I did not write down the exact TimeCode), I did not notice any stuttering. I'd better get this out of the way right now, I'm viewing on my laptop's 17" 1680x1050 nVidia GeForce 8800M GTX-512MB display, with full hardware acceleration.
Not sure what you, and Dan, are seeing. I'm usually a pretty critical observer, though might be missing something important. If you can give me a TimeCode and where, in the frame, you're both seeing the problems, I'll be glad to give it another go.
Good luck,
Hunt
PS I like the mood that both the visuals and music convey. My wife also made note of the URL, for our next trip to the UK in October.

Can you filter iTunes search results by video or audio podcasts?

Similar Messages

Maybe you are looking for