Can you find out that my Firefox stop installing after 70 % and then doen´t emnd the installing?

Many times I have now received a message that Firefox 36.0.1 is avaiable.
But by some reason the updating is never fullfilled.
Can you pleasem help me?
Kindly
Håkan Palm

Download the full installer from here:
https://www.mozilla.org/en-US/firefox/all/

Similar Messages

Can you find out last location of iphone if lost and offline

Can you find out last location of iphone if lost and offline

No. The phone must be online to provide a location and a history of locations is only provided if you place it in Lost Mode, and the phone goes online (at least temporarily) to provide it's location.

When you find out that Muslims BE-HEAD gays, how long before you force THEM out of your pathetic organization? Huh?

When you find out that Muslims BE-HEAD gays, how long before you force THEM out of your pathetic organization? Huh?

Hello, since you care deeply enough to send this message instead of silently turning your back on us, you might spare a minute or two to go through these bits of information trying to clear up a some of the misconceptions that are flying around. Unfortunately some media outlets will rather publish sensationalized stories generating many clicks and increased revenue by ads than perform the most basic fact-checking:
http://blog.gerv.net/2014/04/your-ire-is-misdirected/
<br>https://medium.com/p/7645a4bf8a2
<br>https://blog.mozilla.org/blog/2014/04/05/faq-on-ceo-resignation/
Since this forum is a place primarily for volunteers and fellow Firefox users to provide technical support for Mozilla products and not a general place for discussing policies, I'm also going to close this thread. Should you still have any concerns on the subject that you want to discuss, please take them to the Mozilla governance mailing list located at https://lists.mozilla.org/listinfo/governance instead.
Thank you!

How can we find out that the Z table is adjusted or not???

Dear Friends,
How can we find out that the Z table is adjusted or not???
I have activated it but I need to se that the table is adjusted or not? I know we can do it from SE14 but I don't have an authorization ,
Thnaks,
Sridhar

Hi, Thanks for the reply,
As per ur suggestion of path direction I have checked the table in production and development both.
In my Z table, I have 2 key fields and for those 2 key fields the primary indexs are created automaticaly and displayed in Developement but in Production there is no indexs are created for those 2 fields.
Could you please guide me what could be the reason?
Thanks in advance.
Regards
Sridhar

How can you find out whether anything in a table's been selected?

How can you find out is there anything(a cell or a row) in a table's been selected???
it's doesn't matter which cell or which row's been selected in a table, but just to know is there anything been selected
I can't figure out the code to do that >.<
is there anything to do with
bookTable.getCellEditor()?

How can you find out is there anything(a cell or a row) in a table's been selected???
it's doesn't matter which cell or which row's been selected in a table, but just to know is there anything been selected
I can't figure out the code to do that >.<
is there anything to do with
bookTable.getCellEditor()?

If your phone is stolen and someone tries to register it to their Apple ID can you find out ?

If your iPhone is stolen and someone tries to register it to another Apple ID can you find out.

Sorry, no.

How can you find out if your mac is infected with the flash back virus

how can you find out if your mac is infected with the flash back virus?

F-Secure's Flashback removal tool - http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_k.shtml - supposedly also works on OSX 10.5 and earlier.
05 Apr 2012 How to Detect and Protect Against Updated Flashback Malware - http://tidbits.com/article/12918 - detection methods for multiple browsers and general information
Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

How can you find out what generation your iPod touch is?

How can you find out what generation your iPod touch is?

Hi,
Here is help for the operating system:
If you are locked to iOS 3 then you have an iPod Touch 1st Gen.
If you are locked to iOS 4 then you have an iPod Touch 2nd Gen.
If you are locked to iOS 5 then you have an iPod Touch 3rd Gen.
If you are locked to iOS 6 then you have an iPod Touch 4th Gen.
If you can get iOS 7 and have an iPhone 5 sized screen [bigger] you have the current iPod Touch 5th Gen.
I assume since it says you have iOS 5.1.1 you have an iPod Touch 3rd Gen.
Also, you may want to sync it so iTunes can tell you or you can look at the model number on the back.
Hope this helped.

HT4211 how can you find out what kb are being used by what apps

how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone

Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.

How can you find out what time you were on a website on on your iPod?

How can you find out what time and day you were on a certain website on your iPod?

You can find the day in Safari's History, but not the time.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Hello everyone i have macbook air, hello everyone i have macbook air and my startup disc is full i checked everything and and find out that all space is of OTHER and i dont know what is it and what i have to do with that

hello everyone i have macbook air, hello everyone i have macbook air and my startup disc is full i checked everything and and find out that all space is of OTHER and i dont know what is it and what i have to do with that

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
If you're using Time Machine to back up a portable Mac, some of the available space will be used to make local snapshots, which are backup copies of files you've recently deleted. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as "Backups." The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

How can I find my playlists in this new interface? And then, how can I transfer newly purchased songs to a playlist?

how can I find my playlists in this new interface? And then, how can I transfer newly purchased songs to a playlist?

iCloud does not store messages for you to see/access at icloud.com. It does back up messages so you can restore your iPhone if it ever needs to be reset to factory default. A backup is an image of all your data on the iPhone, and if you delete some messages, then they won't be part of any further backups.
If two people use the same iCloud account, then their devices are kept in sync, just like a single user's multiple devices are kept in sync. It's usually a good idea to have separate accounts for two people, since it's rarely the case that they want each phone to be an exact replica of the other.
Your iphone syncs contacts, events, camera roll, and many other things without the use of a computer.
Read about icloud here... http://www.apple.com/icloud/

Can you guy verify it for me?I verify and then when I try to download apps it says I need to verify it.Can you please help make an easier site or just cancel verifying

Can you guy verify it for me?I verify and then when I try to download apps it says I need to verify it.Can you please help make an easier site or just cancel verifying.I NEED HELP!!!!!!!!!!!!!!

We can't verify for you. We are not Apple, just users like yourself.
Try here:
https://appleid.apple.com

How can you find out if another VI running on the same computer and how can you find out the name of that VI?

Suppose that several VIs running simultaneously on the same computer. How can I find out the names of the running VIs, from another VI?
If the already running VIs are clones of the same basic VI, open and run with the option "Prepare to call and forget", how can I find out the names and index of each clone?

I had an application where I spawned (= ran with Start Asynchronous Call) multiple (reentrant) copies of VIs, and would occasionally "lose control" of them. I needed a way to find all VIs that were running "Top Level" and stop them (so I didn't have to log off from Windows).
I used the Application Property "All VIs in Memory" to get an array of (wait for it ...) All VIs in Memory. I took each name, opened a VI reference to it (simply wire the name string in, as the VI is, by definition, "in memory"), looked at its VI Execution State, and if it was Run Top Level, Invoked the FP.Close and Abort VI Methods. [To prevent the VI that did all this from "committing Suicide", I compared the name string with the current Call Chain, and did nothing if there was a match].
I think you could adopt this idea to do what you need.
BS

How can you find out an individual image size from multiple images on a canvas

This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
Thanks

I want to know they exact dimensions though. You can get them by dragging to the 0,0 corner and then reading off of the ruler scale on the sides but its fiddily as you have to zoom right in and work it out. I know in photoshop there is a ruler but is there any other way in Elements?

Can you find out that my Firefox stop installing after 70 % and then doen´t emnd the installing?

Similar Messages

Maybe you are looking for