Can you freeze the audio tracks in 6.0.3

I have students that are using voice-overs in their projects and every time they move a piece of video all of the audio shifts with the clip. These two pieces - audio and video - were each imported seperately and aligned on the tracks. Is there any way to lock the audio tracks while moving the video?
Any help is appreciated!

Hi Tom, and welcome!
Yes, that is very easy: Place the audio clip exactly where you want it, highlight it by clicking on it, go to Advanced menu and click on 'Lock audio clip at playhead'.
Now, if you move or even edit the video clip, the audio clip moves with it.

Similar Messages

  • I can not hear the audio tracks in iMovie

    I can not hear the audio tracks in iMovie 10.0.1.
    Can anyone help me?

    Have a look in Utilities > Audio Midi Setup

  • Can you put the audio to work throughout the reading of the chapter? Today, when I change the page, the audio stops

    Can you put the audio to work throughout the reading of the chapter? Today,when I change the page, the audio stops

    The default action is as you've noted. Audio stops when navigation to another page,
    iBA doesn't offer a way to do differently, sorry.
    Ken

  • Can you keep the audio of one video clip but add another clip?

    Can you keep the audio of one video clip but add another clip?
    I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

    There are several way to do this;
    Replace with clip...
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

  • Merge Clips:  Can you omit the audio from the video track?

    To be more specific:
    Running FCP 6.0.3:
    I'm syncing audio separately recorded to video for a feature film. The video (RED ftg) has one track of reference audio on it, and it's usually a scratchy wireless signal that is not useable. Can I merge the video track with the audio tracks and leave behind the bad audio? Or can I get rid of that audio in any way?
    Thanks
    Jason

    WireTap Studio did the trick. I downloaded a free Trial version and bob's yer uncle.
    Thanks Michael

  • Can you extract the audio from a music video?

    Some of my favorite songs were purchased from Itunes as music videos. (Because they are also my favorite videos.) Now I'm trying to figure out how to move those songs to the iPod +without having to buy the songs as just songs!+ It's been very frustrating. "Create iPod or iPhone version" doesn't convert to anything useful for a Shuffle. How do I extract the audio from the video?
    Or do I have to buy the same music over again?

    Hello RoyFeni,
    And welcome to Apple Discussions!
    Can you change the music video's *Media Type* to Music from under the Options tab of the *Get Info* window for the track in iTunes?
    I'm not sure if you can, but hey its at least worth a try. It's all I have though.
    Otherwise, this is not possible via iTunes. The only way you would be able to extract the audio is through the help of some third party application. Not sure how simple or complicated the process is.
    B-rock

  • Can you replace the audio of a clip?

    I'm trying to replace the audio of a clip.  I know I can easily delete the audio once it's in a sequence, but I'd like to replace the audio entirely so that the new audio is always on the clip as it's viewed in the project bins. You can edit in Audition for the clip, but thre doesn't seem to be a way to save the changes.

    There are several way to do this;
    Replace with clip...
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

  • Can you export the audio into a SINGLE file?

    I know I can export the individual slide audio, but can I
    export the audio for all the slides into one audio file? How?
    Thanks!

    Hi benhenny
    Sure can! Check the following link.
    Click Here
    Cheers... Rick

  • How do you "UNLINK" the audio tracks?

    I have had LOGIC now for about 3 weeks. I am learning tons and enjoying the program overall. I have received some great help from this forum. My latest adventure is creating more audio tracks. I found out recently from this forum that I had the settings in my LOGIC setup. I increased the number of audio tracks that I can use. My current question is, If I need more audio tracks in a project, I click on an audio track and then go to the Track>Create Multiple Tracks menu. I can import as many as I need.
    The problem I am having is, when I create the tracks, they are somehow "linked" to whatever track that I clicked on when I choose to create the new tracks. I have tried changing the track and midi channels in the LH side of the arrange window, but when I change one track, the other one changes also. I don't know how to separate them. Is there some way to do that? ALSO>>>> Is there a way to create new audio tracks without having to click on an existing track first?
    Thank you for your consideration.

    The fastest way I know is to 1)- open the track mixer window, 2) click on the global button - to turn it on, 3) click on track button - to show all available tracks, 4) double click on an unused track, this will put a new track into the arrange window.
    Turning off the global button in the mixer window and selecting the parts you want to display (Track, Instruments, MIDI, auxs, busses, etc) will show you the active tracks you have in the arrange window.
    Regards
    BB

  • How do you extend the audio track on the menu to keep playing?

    I am new to using DVD studio Pro 4. I created a menu with a video clip from one of the short films on the DVD. I set it as the asset for the dropzone using the Panes Rectangle Frosted Window 1. The duration of the menu is 30 seconds and then it ends in the last frame of the clip with a still. I have an audio track playing and I want it to continue playing over the still (after the video clip has finished) until someone navigates away from the menu. Any advice on how to do this? Thanks so much!

    Unfortunately to do that you would have to edit the clip you want and then have the still at the end actually extend to the end of the audio (so it would really be a still at all but you would create it in Final Cut so it looks like a still - if that makes sense)
    Basically the Video and Audio have to be the same length and then the menu loops back. You can't have the visual part of the menu stop at the end as a still and the music continue. You can only fake it so it looks that way

  • Can you 'zoom' the audio waveform in the timeline?

    Unable to find a solution in the help or the FAQ, so I'll post my first question here :-)
    I would like to vertically zoom into the audio waveform in the timeline. My situation is that I have a 24-bit audio mix of a classical concert with a fairly large dynamic range, i.e. very loud bits and very quiet bits in one single audio file. I don't see enough waveform detail in the quiet parts, even when I enlarge the track vertically. I haven't found an official way of zooming in, at least in the timeline. The audio-waveform-only display in the source monitor does offer a vertical zoom.
    The official help only offers this:
    "To see more volume detail when viewing an audio waveform in a Timeline panel, increase the track height."
    Which seems to imply that 'zooming' in further to bring out the really quiet parts is not a feature.
    I found a bit of a workaround, which is to adjust the clip gain -- the audio waveform changes accordingly. However I'd prefer not to be changing the audio volume every time I need a different vertical zoom on the waveform.
    Thanks,
    3p

    While you can't zoom and the vertical adjustment is limited (which sucks because you can zoom in Audition)` there are still a few more options that might help increase the vertical size of the tracks window.
    First, to adjust the vertical space of each track in the timeline place your selection tool over the line between the tracks over on the left side of the track where audio controls are and drag the track bottom up or down. You can also increase the workspace of the timeline by dragging it up using the same technique, or if you have another monitor put the timeline over there and make it much bigger.
    Second, use the tilde key to expand the entire timeline window. It's the key to the left of #1 key at the top left. Hit it again to return. It will expand any window that is selected. I use this one to get a better look at the waveform. You can also drag the tracks to make them larger.
    good luck!

  • Can you name video/audio tracks in FCP?

    instead of V1, V2, V3... can you title or name these tracks?

    I used to think it would be cool, too, way back when Media 100 was Avid's main competition. But M100 talked us out of it.
    It's only a good option if the names carry through to EDL and other output options from FCP (or Avid, whatever an Avid is).
    I've worked on huge audio projects, 24-30 tracks. I've never been particularly lost and I've never worked on a system where naming the tracks was possible. So it has never really struck me as useful or desirable.
    Personally, I'd like to see tons of things FIXED before Apple starts adding more features and options but be sure to drop this request into the FCP FEEDBACK folder.
    bogiesan

  • Can you generate separate audio tracks from a Multi-Output Instrument?

    Is there a way to use the "export all tracks as audio files" function and have the multi-output assignments generate separate audio tracks? There doesn't appear to be a way to do this.
    Ideas?

    I think you'll need to bounce them out, or record them via busses...

  • Can you redirect the audio output of iTunes via Apple TV?

    I currently have iTunes running on Windows XP with an Airport Express connected to my home stereo. I toggle the iTunes audio between my PC and the Airport Express via the iTunes speaker setting. With Apple TV, will I be able to toggle the audio output from the Apple TV interface?
    Thanks,
    Chaaad

    No, you can use AppleTV like an Express to have audio playing in iTunes relayed to it, but you can't play something on AppleTV and direct the output to the Express.
    AC

  • Can you record the audio from a Video embedded in a pdf?

    I can't seem to find anything on this, so I will ask. A client sent us a company produced interactive pdf and wants us to use the audio from a video clip that is in the pdf. We asked for the audio clip but they don't know who to get it from and just keep saying it is in the pdf. While others try to explain that a pdf and an mp3 are not the same thing. I get to look into a fall back position of trying to extract the audio (or video). There is no copyright issue here. Client peon just can't/won't get the proper file.
    Maybe some one can help or point me to info that says it is not possible.
    Thanks.

    WireTap Studio did the trick. I downloaded a free Trial version and bob's yer uncle.
    Thanks Michael

Maybe you are looking for