Can you generate a static caption for video in InDesign?

I set up my caption in the metadata description area in Bridge. I am trying to generate the static caption in InDesign and it goes through the motion but gives me a blank box. It works correctly for my images, but not for my video. Can this be done or does it just not work for videos?

Seems like this is not possible for videos. I tried static and dynamic captions with MOV and FLV. No chance.

Similar Messages

How can you hook up multiple camcorders for video shoot?

I'm making plans for my wedding and I was interested in recording it with stationary camcorders and my Macbook Pro's webcam of the event. I've hooked up my camcorder before as a additional webcam, but I have't recorded from multiple camera's before. This is importabt because I was also thinking of streaming the video from all 3 cameras online so friends and family could watch the event from out-of-town.
I was thinking I could use my Final Cut Pro software to bring the Camcorder footage in using firewire, but I'm not sure about the computers webcam.
I would really like any opinions and suggestions that don't require additonal purchases.
Any past experiences would be appreciated.

Hello JamieLG. Welcome to the Apple Discussions!
First, let's double-check your AirPort Express Base Station's (AX) settings...
AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
Setup the AX
Connect to the AX's wireless network, and then, using the AirPort Admin Utility, check these settings:
AirPort tab
o Base Station Name: <whatever you wish or use the default>
o AirPort Network Name: <whatever you wish or use the default>
o Create a closed network (unchecked)
o Wireless Security: <your current wireless security setting: None, WEP, or WPA>
o Channel: Automatic
o Mode: 802.11b/g Compatible
Internet tab
o Connect Using: Ethernet
o Configure: Using DHCP
o WAN Ethernet Port: Automatic
Network tab
o Distribute IP addresses (checked)
o Share a single IP address (using DHCP & NAT) (enabled)
If you have wireless security enabled, which type is it: WEP, WPA, or WPA2?

Hello. I have an old G4 Tower at 10.4.11. The password for Keychain has been lost. How can I generate a new password for Keychain? Every time I use Safari it want me to enter the password. Any suggestions? Thank you

Hello. I have an old G4 Tower at 10.4.11. The password for Keychain has been lost. How can I generate a new password for Keychain? Every time I use Safari it wants me to enter the keychain password. Any suggestions? Thank you

See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
Keychain Access asks for keychain "login" after changing login password...
http://support.apple.com/kb/HT1631
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Can you still use your iPhone for apps, music, and videos after it is disconnected from your carrier?

Can you still use your iPhone for apps, music, and videos after it is disconnected from your carrier?

Using an iPhone without a wireless service plan

How do I generate a static caption that has an object style applied?

For instance, I have a photo and have set up a shortcut to generate a static caption. I can apply a paragraph style to it, but I don't see a away to apply an object style that will automatically apply an 11 pt text wrap on the bottom of the text box.

For instance, I have a photo and have set up a shortcut to generate a static caption. I can apply a paragraph style to it, but I don't see a away to apply an object style that will automatically apply an 11 pt text wrap on the bottom of the text box.

What is the most appropriate way to generate a static IPv6 for a domain controller?

DNS Role Best practives is giving errors. Looks like I need to assign ONE static IPv6 to each domain controller and use IT in DNS and DHCP. There are two routers on the network, each assigning a 2002: IP, plus a link local FE80: IP is also assigned.
Is there a way to generate a static IPv6 for domain controllers that will not change even if the network cards or routers are changed?
What is the best practice so that domain integrated DNS and DHCP with Exchange 2010 in the domain, will continue to function?
There is ambiguous information as to whether DC's should have static or dynamic IPv6 IPs. I have tried variations such as IPv4 compatible. IPv4 mapped, ISATAP, etc. but over time have gotten different errors from different sources.
It is one thing for Microsoft to give error messages about IPv6 but I cannot find any definitive recommednations on this.
Thanks if anyone finds a universal answer.
Bob.

Excellent and valid points, Bob. Your outlook explains in an easy way how the challenges setting up Windows Server are in a sense, self-generated, and in every sense fully avoidable.
No changes have been made to the warnings or errors in 2013 R2 despite improvements in other areas. This release mainly brought improvements to the setup in areas that were truly broken like automatic account generation for ADFS. Since that's a decade old
feature it's probably best not to wait for Microsoft to clarify, and I appreciate your recommendations.
I'm bumping this thread since it's the first result for 192.168.1.1 on ipv6 on Google right now, and since there's no way to see how often it's being referenced I wanted to add some additional information.
Multiple NIC's can be specified by using the scope ID parameter supported since Vista, that appears as a percent-sign at the end of IPv6 addresses. It uniquely identifies the network adapter even when that adapter shares the same host portion of the IPv6
address space (i.e. essentially, has the same IP, which in IPv4 is invalid.) I'll give some examples at the end of the post.
Following the recommendation to deprecate the fec0 prefix while maintaining a link-local addressing scheme is possible through the prefix length at the beginning of the IPv6 address. As
this reference at IBM explains, fe80:: maps to a link-local prefix length of 64 equivalent to the IPv4 version of 24, and anything else before the double-colon refers to the network portion of the IPv6 address.
The host portion of the IP address then _could_ be ::20, ::21, etc., as you said, but to follow
this MSDN recommendation, it would be more appropriate to use the same host portion and add a suffix for the scope ID documented on that page. The suffix may be specific to Windows
and may not work in an equivalent way in heterogeneous platform deployments. But since the effect is limited to the local machine it should help anything past XP differentiate NICs when assigned the same host portion.
The approach taken in the random IPv6 generator linked elsewhere on this page leaves open the possibility, however unlikely, that the generated IP can route to some other host on an open network that happens to have generated the same network portion of
the address (the other host would be sharing the same network.) If any part should be random, it's the host portion after the double-colon, not the network portion at the beginning, so that the possibility does not exist.
Additionally, the host portion doesn't have to be random, it's just done that way because it's usually automatically generated; a random number is safer for a computer than relying on a sequence that may not fully cover all the numbers used so far. If you're
doing a manual deployment you can combine the above information with the inline 0-supression in IPv6 to assign numbers in the following way:
fe80::1:1%1 (first computer is 1:1, first interface is %1)
fe80::1:1%2 (second interface)
fe80::1:2%1 (second computer, first interface)
Effectively here we're swapping "192.168.1" for "fe80::1" which is roughly the same length (taking into account variations like 10.0.0). The only gotcha is that _either_ the string after the double-colon can't be 1 by itself since that's
reserved for local machine loopback, _or_ that the second-to-last number after the double-colons can't be 0, since that's equivalent due to inline supression.
Other combinations are fine, like fe80::2%1 and fe80::2%2 for the first computer, then ::3 for the second, etc. I thought having a 2-index for the first machine is too uncommon to look familiar so I chose the alternative, but even something like fe80::fe%80
is perfectly fine.
If you don't need to identify individual NICs then omitting the part after the percent sign makes fe80::10, fe80::11 a valid sequence for 2 computers. For over 255 computers just add another number before the last, so that it looks like fe80::1:10, fe80::1:11,
etc. That should be easier to remember than the randomly generated numbers.
There is also another way if the preference is to use IPv4-lookalike addresses. The mapped address spec is defined in RFC 4291 and it goes along the lines of "::ffff:192.168.1.1" for a valid IPv6 address to the gateway, for example. That is a newer
recommendation than the RFC which the random-number generated linked elsewhere on this page relies on.

Can you make a Keyword Collection for entire event library?

Hello all,
So you make an event, and you can make Keyword Collections for that particular event, such as "WS" or "Person 1" or "Indoors"... But...
What if those keywords apply to other events?
I am making video content for a particular company. I shoot stuff one day import as an event. The only content that I produce is for this company, so you can imagine there are going to be similar themes across mutable events...
As you know this is how it is organized >
DRIVE
>2012
>Event
      >Keyword Collection
This is how I want to get organized>
DRIVE
Master Keyword Collection
>2012
>Event
     >Keyword Collection
> Here is an example of how I think It should be
DRIVE
"All Interior Shots"
>2012
> Event
     >Interior Shots
So can you make a Keyword Collection for entire event library?
Can some one please explain if is this is possible? If not please update!

Andy,
Yes you can but that feature only works if you are searching a single event (Pretty Cool/Useful), Creating a smart collection based on what you tick off in the dialogue box... You will get an error message if Searching the drive itself:
LOL
I did some playing around...
I created a new event
Then I ran a search, with Keywords ticked off, Ticking off mutable Keyword Collections.
Then dragged the results into my new event.
This in effect created "saved search results" but Final Cut started copying clips to that event folder that was created on my external HD. I was hoping that It would generate alias files...
I also...
Created a new project
Ran the Search with Keywords
Dragged all clips into the project..
This also in effect created "saved search results" but not really what I was hoping :/

Can you use midi sounds when recording videos on Photobooth?

Can you use midi sounds when recording videos on Photobooth?
Basically, i like to record videos of me singing and playing guitar or keyboard, but to get a good sound for the keyboard I'd like to be able to record the audio using MIDI sounds...
Ive got Logic, I've got M-Audio Fast Track Pro, into which i have my mic, guitar, and keyboard midi plaugged into. I can use it to record the mic and guitar on photobooth as they are audio inputs, however i can't use the midi sounds on the keyboard :/ I have tried having logic open with the desired MIDI sound selected whilst recording but it doesnt work...
Is there ANY way this is possible?
HELP PLEASE!
Thanks!

I Have just the same problem, if I shout very near the microphone i can just hear something, did you manage to solve the problem?

Can you have a look at this video and give advice please?

Hi Guys,
Can you have a look at this video-
http://www.youtube.com/watch?v=UA0x3bQUW-g
I shot it for a friend at a hotel. Can you let me know if if works ok / stutters etc. on your computer.
I edited hdv pal / ppro cs3 then adobe media encoder to H 264 1280 x 720 25fps bitrate min 2 max 4. keyframes 25.
It looks pretty bad i think at the normal youtube. It looks a lot better when you hit the 'watch in hd' but begins to stutter.
Do you have any advice?
Many thanks
scott

First, thank you for doing a very nice piece. I'm a tad bit tired of the "in-your-face" skateboarding pieces. The young lady is also "easy on the eyes."
Second, I looked at the piece in both resolutions, and also after all buffering had completed. The only things that I saw were one Transition at about the 1/4 point that seemed to have about a 1-frame "glitch," or something. Two of the Titles also did not seem to fade-up/move-in at the same pace, or with the same smoothness as the others. Even looking at movement, like the flag (again near the 1/4 mark - sorry that I did not write down the exact TimeCode), I did not notice any stuttering. I'd better get this out of the way right now, I'm viewing on my laptop's 17" 1680x1050 nVidia GeForce 8800M GTX-512MB display, with full hardware acceleration.
Not sure what you, and Dan, are seeing. I'm usually a pretty critical observer, though might be missing something important. If you can give me a TimeCode and where, in the frame, you're both seeing the problems, I'll be glad to give it another go.
Good luck,
Hunt
PS I like the mood that both the visuals and music convey. My wife also made note of the URL, for our next trip to the UK in October.

Can you filter iTunes search results by video or audio podcasts?

I have been searching for hours and haven't found a definite answer. Anyone know if this is possible?
Can you filter iTunes search results by video or audio podcasts?

I'm having the same problem. I go to Podcasts/Video Podcasts/News and they only give the featured, favorites (whose?), etc. I want to see all video news podcasts but if I then click on see all, it drops the video classification and shows all news podcasts. The iTunes search in general leaves a lot to be desired; its not very intuitive or pleasant to use, not the usual Apple experience.

(268625273) Q WSI-29 Can you give any performance benchmarks for WLS web services?

Q<WSI-29> Can you give any performance benchmarks for WLS web services?
A<WSI-29>: It is very difficult to quantify performance aspects of web services
since they depend on so many variables including but not limited to: backend system
processing by stateless session beans and message driven beans, size of XML SOAP
message sent, system hardware (CPU speed, parallel processing, RAM speed) and
system software (JVM type and version of WebLogic server). However, let me point
out that the EJB backend processing of requests both have the best possible scalability
within the EJB2.0 specification (both stateless session and message driven beans
can be pooled) and servlets have a proven scalable track record. Thus it should
be possible to scale your web service deployment to meet demand. The overhead
in processing XML within the servlet can be significant depending on the size
of XML data (either as a parameter or a return type). While WLS6.1 does not have
any features to address this performance concern, WLS7.0 will feature Serializer
and Deserializer classes which can be dedicated to the XML to Java and Java to
XML translation (they can also be automatically be generated from a DTD, XML Schema
or regular JavaBean).
It is true that web services are not the fastest way to process client requests
but BEA is committed to making WebLogic server the fastest possible service provider.
Adam

see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

Can you change the quality of YouTube videos? Using the YouTube application?

I have a iPhone 4s and I was just wondering can you change the quality of YouTube videos using the intergrated app. Because I have a bad internet connection and I would like to watch YouTube videos without the trouble of going into safari and doing it that way.

The dedicated app is going by the wayside with iOS 6, so a good time to get used to accessing YouTube with Safari only unless you don't plan on installing iOS 6 or unless YouTube decides to provide an app for free or a paid version via the App Store for iOS 6 and later.

Can you buy a DVD player for the ipad?

Can you buy a DVD player for the ipad?

Yes.
You will need Logitec WiFi DVD (device)
http://www.ebay.com/itm/Logitec-WiFi-capable-portable-DVD-drive-LDR-PS8WU2BKW-Bl ack-Japan-New-/221500878434?_trksid=p2054897.l4275
and
app software, Verify that this software will work with the above device:
https://itunes.apple.com/us/app/logitec-wifi-dvd/id562206904?mt=8
video
https://www.youtube.com/watch?v=5LdhaeWIptQ&noredirect=1
Robert

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

Can you generate a static caption for video in InDesign?

Similar Messages

Maybe you are looking for