Can you get file creation dates for Nomad II .NVF fil

Hi,
I have an old Nomad II MG that has several voice recordings of my daughter over the last 4 years, but I don't know the dates they were recorded.
Is there a way to get the actual date of the recording from the Nomad device? All I seem to end up with is the current date when I upload it into Windows.
Thanks...
lj

Hi,
Newbie to SharePoint, learn quite a lot from the links you provided.
“I found out that the original dates are only available in SharePoint if the explorerview has been used”, this would make sense because the original creation time is generated
by the file system in the local machine.
However, when a file is uploaded to SharePoint library, it will be stored as binary data in the database, as well as the newly created time. It means that it will be a “new” file
in the SharePoint site regardless of where it comes from.
Per my knowledge, the only way I can suggest is that you will need to create a client desktop application for the file uploading, which will be a more general way not only for
uploading a file, but also when we need to migrate files between different systems.
Thanks

Similar Messages

  • Can you get an Apple ID for corporate use to associate with more than 10 devices?

    Can you get an Apple ID for corporate use to associate with more than 10 devices?

    I don't believe you can. The usual model for iOS app distribution is for each device to have a unique Apple ID and for apps to be acquired separately, either via codes from the Volume Purchase Program or individual purchase through the iTunes Store. The licensing from the iTunes Store doesn't allow an app to be installed on more than one device unless all the devices are being used by a single person, so you legally cannot install one app on multiple corporate devices in the circumstances most businesses use.
    Regards.

  • Where is Paris can you get a replacement screen for and iPhone 5

    where in Paris can you get a replacement screen for an iPhone 5?

    I don't believe Apple stores in Europe replace iPhone screens. I believe they replace the whole phone.

  • Where can you get the power cord for a 2012 airport express?

    Where can you get a power cord for a 2012 airport express or the equivalent? I couldn't find one in the online store.

    I'm sure the OP found his solution, but I wanted to share mine in case it helps some future seeker.
    There are a lot of brand new cords on eBay for less than $10 including shipping, which is way cheaper than the $39 stereo connector kit or an AC adapter from a retailer.  I just bought a used-like-new one for $5.50.
    The cord is made by Volex, part number APC7Q.  The Apple part number is M9573LL/A.  If the seller got it from the stereo adapter kit, they'll probably list it under MD836LL/A, which is the kit's part number.  I got the best search results on eBay using just the Volex part number.
    Best of luck!

  • Ipod nano 5th gen can you get new a batteries for it??

    I have a 5th gen Ipod nano 16gb, the battery life seems to be waning,  fully charged up,  it only lasts for an 1 1/2 hrs before it runs down, can you get new batteries for it??

    Check this out. http://www.apple.com/batteries/replacements.html

  • Can you get files out of an .inprogress backup inside a .sparsebundle

    I am trying to restore files from a time machine backup to a time capsule. My hard drive died and sent off to apple care to fix and returned brand spanking new. Now I am trying to restore the files from my time machine backup, but time machine won't access the correct backup on the time capsule, keeps trying to restore my wife's laptop to mine.
    I am able to mount the .sparsebundle file associated with my laptop and when you open the drive it has a file with Date.inprogress I can open that as a package and see all the files from my backup but I can't copy any of them out. This is pretty frustrating, as I can see my photos in preview, but can't get them to my disk. All I really want is the photos, everything else can be reinstalled. Anyone got any ideas?

    don't bother with the inprogress file. I don't believe you can do anything with it.
    when you open the sparse bundle there should be folders with your full backups. why don't you use those?

  • Can you get wireless hard drives for the new ipad as apple again havent increased the size

    someone has mentioned that you can get wireless hard dives for the ipad.....this would be beneficial as yet again apple have not increased the size of the maximum hard drive of their new "soon to be released" ipad.....thanks Lee

    The wireless "drives", which are more truly media streamers rather than true file storage, continue to be an optiono for the new iPad just as it was for the previous versions. Confirm compatibility with iOS 5.1 before purchasing, just in case the product might need an update for the new version of iOS.
    Regards.

  • Can you get a solar charger for the ipad 2?

    Does anyone know if you can get a solar charger for an ipad 2?

    There a few technical considerations to enable Ipad charging from PV's (solar cells)
    1. The output voltage must be no greater than 5.1vdc (max)
    2. The correct sensing resistors must be on the USB interface to turn on the charging circuitry just as in the iphone and Ipod.
    3. The output current must be high enough to actually charge the Ipad usually something greater than 800ma at
    5.1vdc. Usually the greater the better, The Apple supplied chargers are 2 amps. The output is stated in direct sunlight so again the greater the better.
    4. The weight, physical and type PV must meet the needs of the user.
    QuickerTek.com

  • Can you get a new screen for the iPod touch 4th generation?

    My iPod screen keeps on falling apart and I was wandering if I could get a new screen for it, but maybe in a different colour?

    No. Apple does not do repairs at all. In order to replace your iPod, you will need to pay:
    iPod touch 8 GB
    $149
    iPod touch 8 GB (2nd gen.)
    $99
    iPod touch 8 GB (3rd gen.)
    $99
    iPod touch 8 GB (4th gen.)
    $99
    iPod touch 16 GB
    $199
    iPod touch 16 GB (2nd gen.)
    $149
    iPod touch 16 GB (4th gen.)
    $99
    iPod touch 32 GB
    $249
    iPod touch 32 GB (2nd gen.)
    $199
    iPod touch 32 GB (3rd gen.)
    $149
    iPod touch 32 GB (4th gen.)
    $99
    iPod touch 32 GB (5th gen.)
    $149
    iPod touch 64 GB (3rd gen.)
    $199
    iPod touch 64 GB (4th gen.)
    $199
    iPod touch 64 GB (5th gen.)
    $149

  • How can i get the pulish data for Price change?

    From the rpm-1205-og.pdf document, the RegularPriceChangePublishBatch Batch can formats and stages output of regular price change price events.
    but I can't get data from rpm_price_publish_stage table after I run the batch.
    if I want generate data into rpm_price_publish_stage, how can I do?
    Please help me. thanks.
    Daniel

    Message was edited by:
    user616568

  • How can you get File/Folder information?

    Hello,
    I'm a Windows XP/Vista convert. One thing I liked about XP and Vista is how you could simply point to a file, hover the pointer over it and it would tell you information about it. Also, in the status bar it would tell you the total amount of space occupied by all the files in a folder.
    Is there a way to get this same functionality in OSX? I haven't upgraded to Leopard just yet, but I wonder if it has this functionality built into it. Very simple features, but can 10.4.10 or 10.5 do either one? Or is there a simple utility that will give this functionality to the Finder?
    Also, what's the BEST file manager for OSX out there? I use PowerDesk in XP quite a bit, is there something similar out there for the Mac?
    Thanks,
    Jeff

    Thanks, but I meant to add, is there some way to get this information other than the way you've outlined? I like how Windows handles it, either by displaying it in the status bar or showing a bubble/popup by just hovering the mouse over the icon. Please tell me that Leopard will do this. I mean, that seems like a VERY basic feature that, well, just makes sense to me. It shouldn't be anymore difficult than that.
    Is this addressed in another way in MacOSX?
    Thanks,
    Jeff

  • Can we get the L7 data for packet using jpcap

    Hi ,
    I am new to jpcap library. I want to retrieve the layer information from the Pcap file. I captured the packets on my interface and saved as pcap file. Now I want to retrieve the Layer 7 data (like http request and responses) from the pcap files. Is it possible using jpcap library???
    I am really strucked at this point in my project...:(

    Hi,
    You try ur logic in
    do                      ---endo.
    after describing the table .
    Do the loop for the number of records available.
    i.e. as per your logic.
    describe table i_hdr line h_lines.
    do h_lines times.
    put your above code and enddo.
    Hope this will work.

  • Can you get your money back for a misleading app

    Hello
    I bought an app because the decription gave sounded a lot like what I was looking for. Turns out its not and they failed to mention that you then also have to subscribe to their website to use it properly.

    Apple won't give you the money back. So you can just learn from it for the future:
    1.) Read the complete description
    2.) Read the comments from the other users
    3.) Have a look if there is a free lite version to test it.

  • Can you get an 800 number for trouble with your system??????????????  I have to call IT every day to do something to make PDF'S   Abobe 10.1

    Abobe the worlds worst customer support  can I return my purchase

    Try the following, in order:
    1. Delete Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Delete the network(s) you regularly use from the list
    2. Delete AirPort Keychain Entries
    o Launch the "Keychain Access" application located in Applications/Utilties.
    o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    o Restart, or log out then back in.
    3. Add Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Add the preferred network(s) using the "+" button.
    o Restart or log out then back in.

  • Can you get the iPhone 4 for $99 without a 2 year contract?

    I want to get the Iphone 4, but if I haven't been with AT&T for more than 2 years (my contract 2 years yet) can I still get it for $99?

    If I couldn't get it for $99 then what would be the alternative price for not having the 2 year contract?

Maybe you are looking for