Can You Get iPod To Stop/Pause At The End Of Each Track

I really need my iPod to stop/pause at the end of each track/song, but it insists on playing right through a playlist one song after another. Does anybody know if there is a way of achieving this, there doesn't seem to be anything in the manuals about this. My iPod is new and is the 60GB color screen model. Any help would be much appreciated.
Thanks, Peter.

Hi boaster, is this an apple accessory, or where else will I find one? When you say there will be some manual intervention, I presume you have to press the button to actually stop it at the end of each track??
Dave W. I've tried your suggestion and it works fine. Its also good because it keeps iPod within the correct playlist. The original suggestion of one track per playlist also works, but unfortuanatly iPod defaults to go back to the main menu at the end of every playlist so you then have to navigate back to where you need to be. Dave, it looks like your suggestion is the answer at the moment, many thanks, although would like to know more about this 'airclick' remote please. Cheers.

Similar Messages

  • Just downloaded the 7.1 IOS update and I'm able to stream my music from the cloud. Does this use up data and how can I get it to stop pausing for periods of time?

    Just downloaded the 7.1.1 IOS update and I'm able to stream my music from the cloud. I'm wondering how I can stream more than just my purchased music?And does this use up data? Also, how can I get playback to stop pausing for periods of time? It is a wifi thing??

    If streaming music when connected to your carrier's cellular network, it uses cellular data.
    Only the music you purchased from the iTunes Store can be streamed unless you have purchased iTunes Match.
    If there is a slow down at the server where the music is stored or high traffic, steaming can be paused. You can also download a song from the iTunes Store cloud to your iPhone so it doesn't need to be steamed.

  • What is NetAuthAgent and how can I get it to stop looking for the unnamed file?

    Since the last Mountain Lion update on my MacBook Pro, I get this error message every few minutes:
       2013-12-16 1:19:04.338 PM NetAuthAgent[1739]:
          inErrorInfo = {   
               AuthType = Server;
               ErrorNumber = 45;
               ErrorType = 4;
              Scheme = file;
    How can I get it to stop looking for the unnamed file?
    Kat Nagel

    If streaming music when connected to your carrier's cellular network, it uses cellular data.
    Only the music you purchased from the iTunes Store can be streamed unless you have purchased iTunes Match.
    If there is a slow down at the server where the music is stored or high traffic, steaming can be paused. You can also download a song from the iTunes Store cloud to your iPhone so it doesn't need to be steamed.

  • HT4993 if your screen cracks, can you get a replacement screen installed on the iphone/

    if your screen cracks, can you get a replacement screen installed on the same phone?

    With iPhone 4 Apple will not replace the screen. They will replace the entire iPhone 4. If you want the screen replaced on the same iPhone 4, you have to do it yourself.

  • Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

    Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

    You can use a free alternative like openoffice for this:
    http://www.openoffice.org/porting/mac/
    or libre office which is a fork of open office:
    http://www.libreoffice.org/

  • Can you get lightroom on your desktop with the $9.99 a month creative cloud membership?

    can you get lightroom on your desktop with the $9.99 a month creative cloud membership?

    fliplip1 wrote:
    hhmmm. possibility, buT why? It's there in black and white, it just takes a few more mins to read it.
    I guess there are multiple ways in which people interpret the same sentence. Not everything is obvious to everyone.
    If confused, people generally ask in the forums.

  • How do you get word count to print at the end of a document in Pages?

    How do you get word count to print at the end of a document in Pages?

    Pages v5 does not provide a user assignable word count variable. With some AppleScript, and a paste operation from the clipboard, you can have locale punctuated word count in this format: 7,803 — anywhere in your document. The following AppleScript works with Pages '09 v4.3 through Pages v5.5.2 on Yosemite.
    I would suggest that you copy paste the following AppleScript into your [Apple] Script Editor and save it (suggestion) wordcnt.applescript. Then, follow this with an option+Save As… and this time set the File format to Script Bundle, or Application with hidden extension — saved to your Desktop. Provided you have a Pages document open, you are then a double-click from the ability to paste your current word count into Pages.
    Note: If you have Pages word count display enabled, it will automatically count your pasted value as another word which initially may deceive on true word count at the time the script was run.
    AppleScript
    --- copy below this line ---
    property locale : "en_US.UTF-8" -- In Terminal, use the locale command to see yours
    if not ApplicationIsRunning("Pages") then
         display dialog "Pages must be running to use this utility."
         return quit
    end if
    tell application "Pages"
        tell body text of front document
            set wordCnt to count words
            -- Don't want punctuated numbers? Remove the single quote from printf format
            set the clipboard to (do shell script "export LC_ALL=" & locale & "; printf \"%'d\" " & wordCnt)
        end tell
    end tell
    on ApplicationIsRunning(appName)
         tell application "System Events" to set appNameIsRunning to exists (processes where name is appName)
         return appNameIsRunning
    end ApplicationIsRunning

  • Stops at the end of each track

    This is probably me but having only got a ipod touch (32gb)and loaded up a album from itenes it stops at teh end of each track and goes back the main menu........whats the deal? and how doo I rectify the problem. I have to play each track and I cant see an option to put this tight? Any advise would be great Thanks

    Hello BarbaraJS,
    Welcome to our community. The only time that Captivate 1 / 2
    should stop at the end of each slide is if you have captured your
    screens in Simulation Training, Assessment Training (possibly in
    custom mode). Capturing screens in simulation or assessment
    training mode will result in Captivate adding click boxes which
    will pause the slide until the learner has clicked inside the click
    box area and then the movie / project will advance to the next
    slide.
    If you open your Captivate project and show the Timeline do
    you see a click box object on the Timeline panel?
    If so then you can either remove each of the click boxes on
    the slides that make up your movie / project or you may prefer to
    create new Captivate file and from the Recording mode menu choosing
    Demonstration mode.
    This will then ensure that no click boxes are added to your
    Captivate movie / project.
    Regards,
    Mark

  • How do you get idvd to stop pausing and resetting the playback once burned onto a dvd?

    I created an idvd using photographs from iphoto and music from itunes and when it plays from idvd I do not notice any pausing.  When I went to burn the project onto a dvd the process took 2 hrs and then I could burn the dvds.
    When I went to watch the dvd, the pictures and music would pause at 5 mins and 54 secs resetting the time back to 0:00.  This continued everytime it reache 5:54 in the slideshow.
    Is there some way to stop this so the slideshow/pictures/music plays smoothly without the skipping?
    Kristin

    Are any of the iTunes audio track protected tracks?  That can cause problems with encoding as iDVD won't use them. 
    Are you saving the project as a disk image before burning?  Doing so separates the encoding process from the burning process so you can test the disk image by mounting it and playing  with DVD Player to make sure the encoding was successful. If it's good then burn the disk image to disk with Disk Utility.   If not then you've saved a disk.
    OT

  • If you view Firefox in full screen can you get favourite toolbar to appear with the address bar?

    When you put Firefox in full screen all the toolbars disappear. When you hover over the top of the screen the address bar and 'open tabs' bar appear. Is it possible to get the favourites toolbar to appear as well?
    If not is there any other way to access favourites without having to close Firefox?

    You can also toggle that setting if you hover the mouse to the top and right click a toolbar to open the toolbar context menu: Hide Toolbars.
    That won't show the bookmarks toolbar AFAIK even if it is selected. You can access the bookmarks via the Bookmarks menu button if you place that button on a visible Navigation Toolbar or Tab bar.
    Add code to userChrome.css below the @namespace line to make the Bookmarks toolbar visible in full screen mode.
    * http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #PersonalToolbar[moz-collapsed="true"] { visibility: visible !important; }</nowiki></pre>
    * http://kb.mozillazine.org/Editing_configuration
    * ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html

  • How can I add a two second pause to the beginning of each slide?

    Hello,
    I have a project with TTS and perfectly aligned CC notes - 64 slides.  Now the customer would like for there be a two-second pause before the audio begins on each slide in order to allow the user to first become oriented with the slide.  Is there a way I can do this without moving the audio down the timeline two seconds, and then having to adjust the appearance of each of the CC notes accordingly? 
    I was thinking of something like pause two seconds On Enter -- Is this possible?
    Thanks for any help!!
    Ryan

    VTML (VoiceText Markup Language) – This Powerful hidden gem in Text to Speech helps you control the generated speech by adding pause, changing the pitch etc !
    Please use the document linked below to get the more information on VTML tags and its usage.
    https://ondemand.neospeech.com/vt_eng-Engine-VTML-v3.9.0-3.pdf
    Regards,
    Rajeev.

  • Can you get an virus or trojaner through the connection-cable (PC) from your iPod touch?

    I had an trojaner on my PC earlier and my iPod touch 4G was connected to my computer. Is it possible for the trojaner or viruses in general to make their way through the connection cable or something? If a photo or something wasn't infected. I mean sync-wise, etc.

    It would be very difficult for a virus or trojan to get from the iPod to your PC via USB. Attaching a virus to any media file such as a photo or music track is very, very difficult, and all known exploits that would do this were blocked a long time ago. Attaching a trojan would not be possible. Unless there's a new exploit I haven't heard of, only if a trojan program was attached to an email and from there transferred to an app that could then be synced to your computer would it be possible malware come from your iPod. I think that rather unlikely and that your trojan got into your PC from some other source.
    Regards.
    Message was edited by: Dave Sawyer

  • Can you get your IMEI # back based on the phone's serial #?

    My iPhone5 was stolen, and the police won't file a report without the IMEI #. I don't have the packaging anymore, and I never synched the phone with iTunes because my Laptop's OS was incompatible.  I managed to get the phone's serial number through the Apple Store.  Is there a way I can use that to get my IMEI # back?

    Do you still have the original box? All the pertinent information is on the back: IMEI, Serial # etc.

  • How can you get a picture of part of the screen?

    I'm trying to get the crosshatch on my screen to draw a box and capture a screen image, but I can't remember the keys. I thought that it was something and F4 but nothing is working. Can anyone clarify this for me. Thanks
    Powerbook G4   Mac OS X (10.4.2)  

    Welcome to Apple Discussions!
    Command-shift-4.
    Command is the Apple logo key.
    Here's the complete screen capture guide:
    http://www.dummies.com/WileyCDA/DummiesArticle/id-2485.html

  • Can you get to recents while talking on the phone?

    Greetings everyone,
    I was on the phone today and I wanted to look at my recent phone calls. I couldn't figure out how to do it.
    Thanks for any help.
    Marco
    Verizon iphone 4

    I have a work-around, since the in-call contacts screen doesn't include recents. While on the phone, tap the "Add call" (the plus) button. From there, you can go to Recents. If you want to see the number and more info on the contact, tap the blue arrow on the right of a contact. Just be careful, because if you tap the number, you will dial it and create a conference call.

Maybe you are looking for