Can you get the EX4100 wit 3 x 4 Tb disks

Would lile to order this asap but it seems to go from 8tb to 16, can't quite stretch to the 16 yet but would like to later in the year if possible, also is that easy to add on or do you have to back up, reformat and set up again?

zombieatslaserz wrote:
Trancer - a quick question about data migration.  Looking at the 4100 and thinking of going with 3 x 6TB disks, configured with raid 5.  If I later choose to add a 4th disk, would the data migration allow the 4100 to redistribute the data across all 4 disks instead of the 3, without having to move the data off the NAS?  Is there some documentation on the data migration; I don't see it in the users manual for the 4100?  Thanks.Trancer wrote:
Welcome to the Community. It is not sold with 3 disk drives but it is sold diskless in order to add only 3 drives if needed. The unit features RAID and data migration for expansion (Depending on the RAID mode). 
It is possbile to to migrate from 3 drives (RAID 5) to a 4 drives (RAID 5).  I believe it calls Raid volume expandsion.

Similar Messages

  • How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    Hello Fran,
    You can wrap the job chain in a master job chain in the first step and set the final status handler there.
    You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
    Regards Gerben

  • How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

    How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

    Welcome to the Apple Community.
    Unfortunately the Apple TV doesn't have a web browser so you can't do that.

  • How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

    How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

    You can check the file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and remove the line(s) related to that extension (procon.password).

  • Can you get the file name of the current executing TSQL script?

    Can you get the file name of the current executing TSQL script? I wrote entries to a generic log file and would like to include the script name.

    Okay, So What you can do is
    1. Read get the version from your  database and redirect it to a text file(SQLCMD outout can be directed to text file using -o option or windows redirection operator >)
    2. Now you can read this value from the text file either inside a batch file or a powershell script and decide what operations you can do. 
    Satheesh
    My Blog |
    How to ask questions in technical forum

  • How can you get the keypad on a USB keyboard to work in Excel

    How can you get the keypad on a USB keyboard to work in Excel for Mac.  Mouse keys is disabled/unchecked, but cannot get it to work.  Even tried downloading a 'num lock' app and it didn't help.

    Hi Michael-
    I do not have any problem with using shift registers in timed loops.  What version of LabVIEW are you using?  Can you please elaborate on why neither shift registers or local variables meet your needs?  I have attached a VI that saves a previous iteration and then computes and displays the difference.  Let me know if you have problems running it.
    Thanks-
    Tom W
    National Instruments
    Attachments:
    TimedLoop_ShiftReg.vi ‏74 KB

  • Can you get the full version of minecraft on an ipad mini?

    Can you get the full version of minecraft on your Ipad mini?

    No.
    You can only download Apps from the App Store.

  • How can I get the photos from iPhoto copied to a disk in the order I want?

    How can I get the photos from iPhoto copied to a disk in the order I want??

    To ensure a custom ordering, sort the files in an album and rename the files with a sequentially numbered filename.
    File > Export > Version/Originals
    Then use "Filename > Sequential"
    or "Filename > Album name with index"

  • How can you get the mail boxes in yahoo onto the e.mail app

    How can you get your yahoo mail boxes onto the e.mail app on an IPad mini?

    Go to the Settings App
    Pick Mail, Contacts, Calendars
    On the right side you'll see under the Mail section "Add Account”
    Pick that and fill out the requested information

  • Where can you get the power cord for a 2012 airport express?

    Where can you get a power cord for a 2012 airport express or the equivalent? I couldn't find one in the online store.

    I'm sure the OP found his solution, but I wanted to share mine in case it helps some future seeker.
    There are a lot of brand new cords on eBay for less than $10 including shipping, which is way cheaper than the $39 stereo connector kit or an AC adapter from a retailer.  I just bought a used-like-new one for $5.50.
    The cord is made by Volex, part number APC7Q.  The Apple part number is M9573LL/A.  If the seller got it from the stereo adapter kit, they'll probably list it under MD836LL/A, which is the kit's part number.  I got the best search results on eBay using just the Volex part number.
    Best of luck!

  • Can you get the plan headphones with a remote(like you do when you first buy a smaller gb ipod)? if so how much do they rage and where can you order then?

    i've been having a hard time just finding a good/not over 30$ headphones that will go with cause the the headphones i
    got are dead and not working no longer and you know parents or anyone these's days that are not willing to go
    buy something that isnt rescearched yet! and i even want a good pair but not have to spend 70$ on them and to
    know they might stop working in the next month/year or two!!

    That's a 3rd gen iPod shuffle, so do not get the new Apple EarPod headphones.  Based on posts I've read here, they do not work with the 3rd gen shuffle.
    You can still find the old version of the Apple headphones with remote, at online stores like Amazon.  They are like the one that came with your shuffle, except they usually have a microphone on the remote nub.
    Alternately, you can use something like this adapter with remote controls
    http://www.amazon.com/iLuv-iEA15BLK-3rd-Party-Headphone-VoiceOver/dp/B002RL9WDQ
    and connect ANY headphones.

  • How can you get the car stereo to play songs on nano in order?

    Hi--I just got an ipod nano and connect it to my car stereo via a usb port.  No matter what controls I try (on the car) it just plays songs in alphabetical order of the song (regardless of the album title).  How can I get it to play in the order I want (like one album at a time)?

    Mine does. If you can browse by artist, album or song titles, chances are it can brwose through playlists as well. Also make sure that you don't have shuffle selected.
    The iPod should play songs in the order that they are listed on the display.

  • You can get Roles but can you get the Role of the user

    Can you display or hide items dependant on the roles of the logged in user is assigned too.
    I know you can do this for the menu using menu.json
    "visible": true,
            "applyIf": {
                "userHasRoles": ["Administrators"]
    But what about for other elements inside the app. Is there a way to get the roles of the user logged in.
    Is this missing as a feature or am I missing some pieces.

    I just want to hide or remove a page element ie if(adminUserRole != 'Admin') {$('#element').remove}. Just some way to see the roles of the admin user that is logged. But yes early days.
    On a side note BC are looking to launch the project and advertise the store on the 17th is this not a bit ahead of themselves if there is a potential that apps functionality may be reduced because of new policies, restrictions etc even if only temporarily. Once apps hit the masses this may cause some tension when people loose functions they once had.
    Edit :Ok BC have already changed the date of the launch. I jumped the gun in saying this as they have it all under control.

  • How can you get the dashes to appear inbetween phone numbers

    Is there anyway that I can get the dashes to appear so phone numbers do not look like a big block of numbers.  so instead of 18001234567 is goes 1-800-123-4567.  I looked in options and it does not look like it is possible

    Hi,
    The dashes aren't necessary for the actual call so the Blackberry doesn't waste space (memory) holding the character.
    Make sense?
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Can you get the album art to fill the screen?

    1)Is it possible to get the album art to fill the screen on the nano?
    2)If you make the gif more widescreen in dimensions will it fill more of the screen at the sides?

    1) If you press twice on the 'select' button, the pic will fill the screen. However, it only stays for a couple of seconds. I don't think you can make it permanent.
    2) No, it is being compressed in iTunes to fit their pre-defined square shape. I haven't seen any settings which would enable you to play with that.

Maybe you are looking for